Modular Approval Request Letter

FCC ID: ZKJ-WCATA007

Cover Letter(s)

Download: PDF
FCCID_4188948

Appliance Park, AP2-226, Louisville, KY 40225, United States Tel No : +82-31-8094-6732 Fax No : +82-31-8094-7040 MODULAR APPROVAL LETTER 2019-02-27 Applicant : Haier US Appliance Solutions, Inc. FCC ID : ZKJ-WCATA007 We would like to answer for Single Modular Approval in accordance with the requirement of rule part 15.212 as described below No. Requirements Comment Comply (Y/N) The radio element of the modular transmitter has its own 1 Refer to the external photo Y shielding The modular transmitter must have buffered modulation All input to the modules are 2 Y data/inputs (if such inputs are provided) buffered through microprocessor inputs. The modular transmitter must have its own power supply Internal power regulators 3 Y regulation. Refer to the Block-diagram The modular transmitter must comply with the antenna 4 Refer to the internal photo Y requirements of Section 15.203 and 15.204(c). The modular transmitter must be tested in a stand-alone The EUT was tested in a standalone 5 configuration, i.e., the module must not be inside another device configuration via a SD extension cable Y during testing. Refer to the test setup photo The modular transmitter must be labeled with its own FCC ID. If the FCC ID is not visible when the module is installed inside 6 another device, then the outside of the device into which the Refer to the user manual Y module is installed must also display a label referring to the enclosed module The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete 7 transmitter and the manufacturer must provide adequate Refer to the user manual Y instructions along with the module to explain any such requirements The modular transmitter must comply with any applicable RF Refer to the RF exposure 8 Y exposure requirements statement for more details. Sincerely, Park Hansung / Hardware RF Engineer GE Appliances, a Haier company


Document Created: 2019-02-27 11:51:53
Document Modified: 2019-02-27 11:51:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC