Modular Approval Request Letter

FCC ID: ZKJ-WCATA005

Cover Letter(s)

Download: PDF
FCCID_3622507

                                         Appliance Park, AP2-226, Louisville, KY 40225, United
                                         States
                                         Tel No : +82-31-8094-6732
                                         Fax No : +82-31-8094-7040



                          MODULAR APPROVAL LETTER
2017-10-25

Applicant : Haier US Appliance Solutions, Inc.
FCC ID : ZKJ-WCATA005

We would like to answer for Single Modular Approval in accordance with the requirement of rule part
15.212 as described below

No.                          Requirements                                        Comment                 Comply (Y/N)
       The radio element of the modular transmitter has its own
 1                                                                  Refer to the external photo               Y
       shielding
                                                                    All input to the modules are
       The modular transmitter must have buffered modulation
 2                                                                  buffered through microprocessor           Y
       data/inputs (if such inputs are provided)
                                                                    inputs.
       The modular transmitter must have its own power supply       Internal power regulators
 3                                                                                                            Y
       regulation.                                                  Refer to the Block-diagram
       The modular transmitter must comply with the antenna
 4                                                                  Refer to the internal photo               Y
       requirements of Section 15.203 and 15.204(c).
                                                                    The EUT was tested in a standalone
       The modular transmitter must be tested in a stand-alone
                                                                    configuration via a SD extension
 5     configuration, i.e., the module must not be inside another                                             Y
                                                                    cable
       device during testing.
                                                                    Refer to the test setup photo
       The modular transmitter must be labeled with its own FCC
       ID.
       If the FCC ID is not visible when the module is installed
 6                                                                  Refer to the user manual                  Y
       inside another device, then the outside of the device into
       which the module is installed must also display a label
       referring to the enclosed module
       The modular transmitter must comply with any specific
       rules or operating requirements that ordinarily apply to a
 7     complete transmitter and the manufacturer must provide       Refer to the user manual                  Y
       adequate instructions along with the module to explain any
       such requirements
       The modular transmitter must comply with any applicable      Refer to the RF exposure
 8                                                                                                            Y
       RF exposure requirements                                     statement for more details.


Sincerely,




Park Hansung / Hardware RF Engineer
GE Appliances, a Haier company



Document Created: 2017-10-25 13:48:43
Document Modified: 2017-10-25 13:48:43

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC