FCC MPE Report rev.1

FCC ID: ZKJ-KITCHENHUB1

RF Exposure Info

Download: PDF
FCCID_4178715

FCC ID: ZKJ‐KITCHENHUB1 Statement of compliance to Maximum Permissible Exposure (MPE) No. 190100007SHA‐009 Applicant : Haier US Appliance Solutions, Inc. Appliance Park AP2‐226, Louisville, KY, 40225, United States Manufacturer : Haier US Appliance Solutions, Inc. Appliance Park AP2‐226, Louisville, KY, 40225, United States Product Name : KITCHEN HUB Type/Model : UVH13012M1SS Additional Model : UVH13012M2SS, UVH13012M3SS, UVH13012M4SS, UVH13012M5SS, UVH13013M1DS, UVH13013M2DS, UVH13013M3DS, UVH13013M4DS, UVH13013M5DS, UVH13014M1WM, UVH13014M2WM, VH13014M3WM, UVH13014M4WM, UVH13014M5WM, UVH13013M1TS, UVH13013M2TS, UVH13013M3TS, UVH13013M4TS, UVH13013M5TS According to §2.1091, §2.1093 and §1.1307(b), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Date of issue: February 18, 2019 Prepared by: Reviewed by: Wade Zhang (Project engineer) Daniel Zhao (Reviewer) Page 1 of 3

FCC ID: ZKJ‐KITCHENHUB1 Power density (S) is calculated according to the formula: S = PG / (4π R²) Where S = power density in mW/cm² P = transmit power in mW G = numeric gain of transmit antenna (numeric gain=Log‐1(dB antenna gain/10)) R = distance (cm) The calculations in the table below use the highest gain of antenna for client EUT. These calculations represent worst case in terms of the exposure levels. Frequency band Power Antenna Gain R S Limits (MHz) dBm mW dBi (Numeric) (cm) (mW/cm2) (mW/cm2) 2402 ‐ 2480 8.71 7.43 3.1 2.04 20 0.003 1 2402 ‐ 2480 2.30 1.70 3.1 2.04 20 0.001 1 2402 ‐ 2480 ‐4.10 0.39 1.6 1.45 20 0.0001 1 2412 ‐ 2462 16.79 47.75 3.1 2.04 20 0.019 1 2405 ‐ 2480 10.32 10.76 1.5 1.41 20 0.003 1 908.42 – 908.42 ‐6.70 0.21 ‐1.0 0.79 20 0.00003 0.454 5180 ‐ 5240 10.73 11.83 2.7 1.86 20 0.004 1 5260 ‐ 5320 10.83 12.11 2.7 1.86 20 0.004 1 5500 ‐ 5700 13.35 21.63 2.7 1.86 20 0.008 1 5745 ‐ 5825 12.87 19.36 2.7 1.86 20 0.007 1 Max Permit Power Frequency band Antenna Gain R S Limits with tolerance (MHz) dBm mW dBi (Numeric) (cm) (mW/cm2) (mW/cm2) 2402 ‐ 2480 9.00 7.94 3.1 2.04 20 0.003 1 2402 ‐ 2480 3.00 2.00 3.1 2.04 20 0.001 1 2402 ‐ 2480 ‐3.00 0.50 1.6 1.45 20 0.0001 1 2412 ‐ 2462 17.00 50.12 3.1 2.04 20 0.020 1 2405 ‐ 2480 11.00 12.59 1.5 1.41 20 0.003 1 908.42 – 908.42 ‐5.00 0.32 ‐1.0 0.79 20 0.0001 0.454 5180 ‐ 5240 11.00 12.59 2.7 1.86 20 0.005 1 5260 ‐ 5320 11.00 12.59 2.7 1.86 20 0.005 1 5500 ‐ 5700 14.00 25.12 2.7 1.86 20 0.009 1 5745 ‐ 5825 14.00 25.12 2.7 1.86 20 0.009 1 Note: 1 mW/cm2 from 1.310 Table 1 For the device can support simultaneous transmission, according to 447498 D01 General RF Exposure Guidance v06, For the device consider simultaneous transmission of WIFI2.4G/5G/BT/BLE, ZigBee and Z‐Wave, BLE, The worst MPE = 0.020 + 0.003 + 0.0001 + 0.0001 = 0.0232 mW/cm2< 1 mW/cm2. Page 2 of 3

FCC ID: ZKJ‐KITCHENHUB1 Appendix I Definition below must be outlined in the User Manual: To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Page 3 of 3


Document Created: 2019-02-22 16:20:42
Document Modified: 2019-02-22 16:20:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC