user manual

FCC ID: ZKJ-BLEC002

Users Manual

Download: PDF
FCCID_4093272

MODULE SPECIFICATION Version: 1.0 Model No.:191D9618 HW Version: 1.1 CONTENT I

CONTENT........................................................................................................................................II 1.Summary.......................................................................................................................................1 2.Functional Block Diagram.......................................................................................................... 1 3.Module Hardware Characteristic...............................................................................................2 3.1 RF Specifications..................................................................................................................2 3.2 Electrical Characteristics..................................................................................................... 4 4. Connector pin definitions...........................................................................................................5 5. Module Size.................................................................................................................................6 5.1 Sample Picture......................................................................................................................6 5.2 Mechanical Dimensions.......................................................................................................6 II

1.Summary The Module which use the Cypress® CYW20707UA2 that is a single-chip Bluetooth 4.2-compliant, stand-alone baseband processor with an integrated 2.4 GHz transceiver. Features： 1）Complies with Bluetooth Core Specification version 4.2 including BR/EDR ,without BLE mode. 2） Bluetooth Device ID profile version 1.3 compliant 3） Supports Generic Access Profile (GAP) 4）Supports Adaptive Frequency Hopping (AFH) 5） Excellent receiver sensitivity 2.Functional Block Diagram 1

3.Module Hardware Characteristic 3.1 RF Specifications 1.Receiver RF Specifications 2

2.Transmitter RF Specifications 4.Antenna：PCB Antenna. 5.Antenna Gain: 1.43dBi(Peak), 3.2 Electrical Characteristics 1. Operation temperature range： -25℃~+85℃ 2. Storage temperature range：-40℃~+125℃ 4

4. Connector pin definitions 7Pin connector（J101)model:TMM-107-01-F-S-SM 3Pin connector(J105) model:BM03B-XASS-TF J101_1Pin J105_1Pin J101 connector pin definition Pin Signal Description Remark 1 3V3 Output voltage:3.3V typ 2 TXD 20707 HCI UART_TX: UART transmit data 3 RXD 20707 HCI UART_RX:UART receive data 4 RST 20707 Reset :Active-low reset input 5 RTS 20707 HCI UART_RTS: UART request to send output 6 CTS 20707 HCI UART_CTS:UART clear to send input 7 GND Ground J105 connector pin definition Pin Signal Description Remark 1 5V_IN Power supply Range:4V~6.5V(5V typ) 2 GEA2 Communication signals 3 GND Ground 5

5. Module Size 5.1 Sample Picture 5.2 Mechanical Dimensions 6

FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: ZKJ‐BLEC002 Or Contains FCC ID: ZKJ‐BLEC002” When the module is installed inside another device, the user manual of the host must contain below warning statements; 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The devices must be installed and used in strict accordance with the manufacturer's instructions as described in the user documentation that comes with the product .


Document Created: 2018-12-04 14:39:00
Document Modified: 2018-12-04 14:39:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC