RF Exposure

FCC ID: ZKJ-BCEA001

RF Exposure Info

Download: PDF
FCCID_3474353

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com RF EXPOSURE EVALUATION Applicant : Haier US Appliance Solutions, Inc. : Appliance Park, AP2-226, Louisville, KY 40225, Applicant Address United States Kind of Product : NewFI Mobile Equipment : BCEA001 model name FCC ID : ZKJ-BCEA001 Certification : 10229A-BCEA001 Number ISED Antenna type : Chip antenna Antenna Gain : 2.07 dBi Page 1 of 2

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com ** MPE Calculations ** The EUT will only be used with a separation of 20 centimeters or greater between the antenna and the body of the user. The MPE calculation for this exposure is shown below. The peak radiated output power (EIRP) is calculated as follows: EIRP = P + G Where, P = Power input to the antenna (mW) G = Power gain of the antenna (dBi) The numeric gain(G) of the antenna with a gain specified in dB is determined by: G = Log-1 (dB antenna gain / 10) Power density at the specific separation: S = PG/(4R2π) Where, S = Maximum power density (mW/cm2) P = Power input to the antenna (mW) G = Numeric power gain of the antenna R = Distance to the center of the radiation of the antenna (20cm = limit for MPE) The Maximum permissible exposure (MPE) for the general population is 1 mW/cm2 . The power density at 20cm does not exceed the 1 mW/cm2 limit. 2402 – 2480 MHz Mode P (dBm) P (mW) G (dBi) R (cm) S (mW/cm2) Bluetooth 8.412 6.94 2.07 20 0.0022 Page 2 of 2


Document Created: 2017-07-17 16:53:08
Document Modified: 2017-07-17 16:53:08
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC