User manual

FCC ID: ZJP-SR215W

Users Manual

Download: PDF
FCCID_4473166

37" Bluetooth Sound bar with Wireless Subwoofer User‘s Guide for SR215W For the most up—to—date version of this User‘s Guide, go to: www.iLiveElectronics.com

Safety Instructions & Warnings CAUTION Warning: To reduce the risk of electric Important Safety Instructions shock, do not remove cover (or back). No RISK OF ELECTRIC SHOCK DO NOT OPEN user-serviceable parts inside. Refer servicing • Read these Instructions. ATTENTION RISQUE D' ÉLECTROCUTION NE PAS OUVRIR to qualified service personnel. • Keep these Instructions. • Heed all Warnings. The exclamation point within an equilateral • Follow all instructions. triangle is intended to alert the user to • Do not use this apparatus near water. the presence of important operating and • Clean only with a dry cloth. maintenance (servicing) instructions in the • Do not block any ventilation openings. Install in accordance literature accompanying the appliance. with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat The lightning flash with arrowhead symbol, registers, stoves, or other apparatus (including amplifiers) within an equilateral triangle, is intended to that produce heat. alert the user to the presence of uninsulated • Do not defeat the safety purpose of the polarized or “dangerous voltage” within the product’s grounding - type plug. A polarized plug has two blades with enclosure that may be of sufficient magnitude one wider than the other. A grounding type plug has two to constitute a risk of electric shock to persons. blades and a third grounding prong. The wide blade or the third prong are provided for your safety. When the provided This symbol indicates that this product plug does not fit into your outlet, consult an electrician for incorporates double insulation between replacement of the obsolete outlet. hazardous mains voltage and user accessible • Protect the power cord from being walked on or pinched parts. particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the Warning: Do not ingest battery, manufacturer. chemical burn hazard. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing WARNING : This product can expose you is required when the apparatus has been damaged in any to chemicals including lead, which is known way, such as power-supply cord or plug is damaged, liquid to the State of California to cause cancer and has been spilled or objects have fallen into the apparatus, the birth defects or other reproductive harm. For apparatus has been exposed to rain or moisture, does not more information go to www.P65Warnings. operate normally, or has been dropped. ca.gov. This product meets and complies • Use only with a cart, stand, tripod, bracket, with all Federal regulations. or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 2

FCC Warnings Warning: Changes or modifications to this unit not expressly • CAUTION: Danger of explosion if battery is incorrectly approved by the party responsible for compliance could void the replaced. Replace only with the same or equivalent type. user’s authority to operate the equipment. • Battery shall not be exposed to excessive heat such as NOTE: This equipment has been tested and found to comply sunshine, fire or the like. with the limits for a Class B digital device, pursuant to Part • Keep new and used batteries away from children. If the 15 of the FCC Rules. These limits are designed to provide battery compartment does not close securely, stop using the reasonable protection against harmful interference in a product and keep it away from children. residential installation. This equipment generates, uses, and can • If you think batteries might have been swallowed or radiate radio frequency energy and, if not installed and used in placed inside any part of the body, seek immediate medical accordance with the instructions, may cause harmful interference attention. to radio communications. However, there is no guarantee that • Do not mix old and new batteries. interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television • Completely replace all old batteries with new ones. reception, which can be determined by turning the equipment off • Do not mix alkaline, standard (carbon-zinc), or rechargeable and on, the user is encouraged to try to correct the interference (ni-cad, ni-mh, etc) batteries. by one or more of the following measures: • Batteries should be recycled or disposed of as per state and • Reorient or relocate the receiving antenna. local guidelines. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Additional Warnings and Precautions • CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected form the mains socket outlet completely. • WARNING: Shock hazard - Do Not Open. • Caution and marking information is located at the rear or bottom of the apparatus. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing. • Objects filled with liquids, such as vases, shall not be placed on the apparatus. • CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. • WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment • WARNING: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. • WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause. 3

Table of Contents Setup Features & Specifications - 5 Includes - 5 Power - 5 Remote batteries - 5 Orientation Rear View - 6 Front View - 6 Source Mode Indicator LED - 6 Speaker Controls (Side) - 6 Subwoofer Connecting the Wireless Subwoofer - 7 Remote Functions & Controls - 8 Remote Battery - 8 Connecting Devices Initial Bluetooth Connection and Playing Audio - 9 Previously Connected Devices - 9 Troubleshooting - 9 Line In - 9 Stereo RCA Inputs (Aux In) - 10 Optical Input - 11 Company Information Contact Information - 12 International Support - 12 Warranty - 12 4

Setup Features & Specifications Includes • 37" length • Remote control with 2 AAA batteries • Supports Bluetooth 5.0, range: 60 ft. • Optical audio cable • 2.1 channel stereo sound • AC/DC power adapter for sound bar and subwoofer • Digital volume control • Wall-mount hardware and instructions • Full-function remote • Optical audio input • Line In (3.5mm audio input) • Aux In RCA stereo audio inputs Power Plug the power adapters for the sound bar and the subwoofer into their respective DC Inputs on the back of the units and a standard wall outlet. DC IN L AUX IN R OPTICAL IN DC IN OFF ON CONNECT DC IN L AUX IN R OPTICAL IN DC IN OFF ON CONNECT Remote Battery Remote control: requires 2 AAA batteries (included). LR03,1.5VX2 2x UM-4 (AAA) AAA 5

Orientation Rear View Wall Mount Pegs DC IN L AUX IN R OPTICAL IN Speaker Inputs: Stereo RCA Inputs | Optical Audio Input | DC Power Input Front View Function/Source Indicators: Power | Line In | Optical | RCA/Aux In | Bluetooth Remote Receiver Source Mode Indicator LED Status Indicator Light Power Off Red Light Bluetooth Standby/Pairing Slow/Quick Flashing Blue Light Bluetooth Connected Solid Blue Light Optical Mode Orange Light Aux In (RCA) Mode White Light Line In Mode Green Light Speaker Controls (Side) Power/Source Press to power the unit ON. Press and hold to power the unit OFF. SOURCE/ Press to switch audio source to Bluetooth, Optical, Aux In, or Line In modes. Volume VOL + Press to adjust volume. Pair/Play/Pause Press and hold to begin pairing to a Bluetooth device. Press to play or pause audio (BLUETOOTH MODE). VOL – Line In (3.5mm audio input) Connect the sound bar to a mobile device using a 3.5mm audio cable (not included). PAIR LINE IN 6

Subwoofer Connecting the Wireless Subwoofer 1. Power ON the subwoofer while the sound bar is ON. The subwoofer will now automatically begin connecting to the sound bar. 2. When the subwoofer has connected to the sound bar the Connect LED indicator will turn solid blue. When audio is played through any source, the speaker will automatically use the connected subwoofer. 3. If the connection has failed or is lost, the indicator will turn off. Power OFF the subwoofer and power it ON again to try reconnecting. DC IN OFF ON CONNECT Power Switch Connect LED Indicator NOTE: To reduce unwanted vibration, try placing the subwoofer on a solid or padded surface, such as the floor or carpet. 7

Remote Functions & Controls Power Mute Press to turn Press to mute the volume. the unit on or off. The indicator on the sound bar will flash. Press to switch Bass to Bluetooth Mode. Press to adjust the bass up or down. Optical Press to switch Treble to Optical mode. Press to adjust the treble up or down. AUX Press to switch to Aux In mode. Line In Press to switch to Aux In mode. Skip Music In Bluetooth mode, Press to switch to the press to skip forward EQ optimized for music. or back one track. Movie Play/Pause Press to switch to the In Bluetooth Mode, press EQ optimized for movies. to play or pause audio Dialog tracks. Press and hold Press to switch to the to pair to a Bluetooth EQ optimized for dialogue. device. Volume +/- Press to adjust the volume. 8

Connecting Devices Initial Bluetooth Connection and Playing Audio 1. Power ON the sound bar by pressing the Power button. A voice will say, “Bluetooth,” and the LED indicator will slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device. 2. Using the controls on your Bluetooth device, select ITBSW399 in the Bluetooth Settings to pair. If need be, refer to the user’s manual for your specific device for more information. 3. When successfully paired, a voice will announce, “Bluetooth is connected,” and the LED indicator will turn solid blue. Audio from the connected Bluetooth device will now be heard through the speaker. 4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level. 5. After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device used. Note: If your device should become unpaired or you find it is unable to connect, press & hold the Play/ Pause (remote), or Pair button (sound bar) to enter to Pairing Mode. A voice will announce, “Bluetooth is connecting,” and you can connect to the speaker manually. Note: This sound bar has a last-function-used memory; it will resume using the last mode before it was turned OFF after it is turned ON again. Previously Connected Devices • The sound bar can remember multiple Bluetooth devices and will always try to reconnect to the last device used. • To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings menu on the device you wish to use and select ITBSW399. Troubleshooting If the sound bar should become unpaired or will not connect normally, follow these steps in your device’s Bluetooth Settings Menu. • Delete the sound bar (“Forget This Device”). • Turn Bluetooth OFF, then ON again, and repeat the Initial Bluetooth Connection steps. Line In Requires a 3.5mm audio cable (not included). SOURCE/ 1. Connect a 3.5mm audio cable to the Line In on the unit and the audio output/headphone jack on an audio device. VOL + 2. Power ON the sound bar and press Source on the sound bar or Line VOL – In on the remote to select Line In Mode. A voice will announce the source mode and the indicator will turn green. PAIR LINE IN 3. Use the controls on the connected device to select and play audio. Be sure the volume on your connected device is audible when you begin playing. Connect 3.5mm audio cable (not included) to audio source 9

Connecting Devices Stereo RCA Inputs (Aux In) Requires RCA stereo audio cable (not included). When connecting RCA stereo audio plugs (Red/White), match them to their corresponding color coded ports. 1. Connect an RCA stereo audio cable to the Aux In ports on the sound bar and the RCA audio outputs on a television or other audio source. 2. Power ON the sound bar and press Source on the sound bar or Aux In on the remote to select Aux In Mode. A voice will announce the source mode and the indicator will turn white for Aux In. 3. Audio played through the television or other source should now be heard through the speakers. DC IN L AUX IN R OPTICAL IN Connect RCA audio cable (not included) to audio source 10

Optical Input Requires an audio source with an Optical Audio Output and a Digital Optical Audio Cable (included). 1. Using a Digital Optical Audio Cable, connect the Optical Input on the sound bar to the Optical Output on your audio source (TV, amplifier, etc.). 2. Power ON the sound bar and press Optical on the remote or Source on the sound bar to select Optical Mode. A voice will announce the source mode and the indicator will turn orange. 3. On the connected audio source (TV, amplifier, etc.), be sure the audio settings are set to PCM or Optical Audio. 4. Audio played through the connected audio source (TV, amplifier, etc.) should now be heard through the speaker. Important tips for optical audio: • Use the correct optical audio cable and make sure that it is firmly seated in both source and sound bar sockets. • Optical audio output is activated from the audio source (a red light should be visible from the optical socket). It may be labeled SPDIF in the settings menu of the source. • The optical output source should be set to output PCM and not Dolby Digital. DC IN L AUX IN R OPTICAL IN Connect optical audio cable (included) to audio source 11

Company Information Contact Information Warranty Website: www.iLiveElectronics.com For Warranty Information and the most up-to-date Email Support: prodinfo@dpiinc.com version of this User’s Guide, go to: www.iLiveElectronics.com Email Parts: partsinfo@dpiinc.com Phone Support: 1-888-999-4215 International Support To download this User’s Guide in English, Spanish, and French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de apoyo en: www.iLiveElectronics.com Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment posées, consultez la rubrique d’assistance sur: www.iLiveElectronics.com Made Green Protect for Today Sustain for Tomorrow Copyright © 2019 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice. 12


Document Created: 2019-08-21 10:46:32
Document Modified: 2019-08-21 10:46:32
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC