MPE Report

FCC ID: ZDEG2

RF Exposure Info

Download: PDF

FCCID_3913461

1. MAXIMUM PERMISSIBLE EXPOSURE (MPE)

1.1 General Information

Client Information
Applicant: ShenZhen Foscam Intelligent Technology Co., Limited
Address of applicant: Room A, 9/F, Block F5, TCL International E City, No. 1001
Zhongshanyuan Road, Xili, Shenzhen, China

Manufacturer: ShenZhen Foscam Intelligent Technology Co., Limited
Address of manufacturer: Room A, 9/F, Block F5, TCL International E City, No. 1001
Zhongshanyuan Road, Xili, Shenzhen, China

General Description of EUT:
Product Name: Outdoor HD IP Camera
Trade Name: FOSCAM
Model No.: G2
G2VX、G2C VX、G2E VX、G2 Plus VX、G2 Lite VX、G4 VX、G4C
VX、G4E VX、G4 Plus VX、G4 Lite VX、FI9900P VX、FI9900EP VX、
Adding Model(s): FI9901P VX、FI9901EP VX、FI9902P VX、FC5415P VX、FC5618P VX、
FC5618EP VX、FC5718EP VX（which “X”can be from 0 to 9,the default
state is null while it is V0）
FCC ID: ZDEG2
Rated Voltage: Power Port:DC12V

Technical Characteristics of EUT:
Support Standards: 802.11b, 802.11g, 802.11n
2412-2462MHz for 802.11b/g/n(HT20)
Frequency Range:
2422-2452MHz for 802.11n(HT40)
RF Output Power: 9.66dBm (Conducted)
Type of Modulation: CCK, OFDM, QPSK, BPSK, 16QAM, 64QAM
Data Rate: 1-11Mbps, 6-54Mbps, up to 150Mbps
Quantity of Channels: 11 for 802.11b/g/n(HT20); 7 for 802.11n(HT40)
Channel Separation: 5MHz
Type of Antenna: External Antenna
Antenna Gain: 2.0dBi

Note 1: The test data is gathered from a production sample provided by the manufacturer. The appearance of
others models listed in the report is different from main-test model MOPLUS, but the circuit and the electronic
construction do not change, declared by the manufacturer.

1.2 Standard Applicable

According to §1.1307(b)(1) and KDB 447498 D01 General RF Exposure Guidance v06, system operating under
the provisions of this section shall be operating in a manner that the public is not exposed to radio frequency
energy level in excess limit for maximum permissible exposure.

(a) Limits for Occupational / Controlled Exposure

Electric Field Magnetic Field Averaging Times
Frequency range Power Density
Strength (E) Strength (H) | E |2, | H |2 or
(MHz) (S) (mW/cm2)
(V/m) (A/m) S (minutes)
0.3-3.0 614 1.63 (100)* 6
3.0-30 1842/f 4.89/f (900/f)* 6
30-300 61.4 0.163 1.0 6
300-1500 / / F/300 6
1500-100000 / / 5 6

(b) Limits for General Population / Uncontrolled Exposure

Electric Field Magnetic Field Averaging Times
Frequency range Power Density
Strength (E) Strength (H) | E |2, | H |2 or
(MHz) (S) (mW/cm2)
(V/m) (A/m) S (minutes)
0.3-1.34 614 1.63 (100)* 30
1.34-30 824/f 2.19/f (180/f)* 30
30-300 27.5 0.073 0.2 30
300-1500 / / F/1500 30
1500-100000 / / 1 30
Note: f = frequency in MHz: * = Plane-wave equivalents power density

1.3 MPE Calculation Method

S = (30*P*G) / (377*R2)
S = power density (in appropriate units, e.g., mw/cm2)
P = power input to the antenna (in appropriate units, e.g., mw)
G = power gain of the antenna in the direction of interest relative to an isotropic radiator,
the power gain factor is normally numeric gain.
R = distance to the center of radiation of the antenna (in appropriate units, e.g., cm)

1.4 MPE Calculation Result

WIFI2.4G:
Maximum Tune-Up output power: 9.66 (dBm)
Maximum peak output power at antenna input terminal: 9.25 (mW)
Prediction distance: >20(cm)
Prediction frequency: 2437 (MHz)
Antenna gain: 2.0 (dBi)
Directional gain (numeric gain): 1.58
The worst case is power density at prediction frequency at 20cm: 0.003(mw/cm2)
MPE limit for general population exposure at prediction frequency: 1 (mw/cm2)

Result: Pass

Document Created: 2018-07-05 10:48:53
Document Modified: 2018-07-05 10:48:53

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC