Test Report

FCC ID: ZD3FTE401

Test Report

Download: PDF
FCCID_4346435

FCC PART 15B MEASUREMENT AND TEST REPORT For Feitian Technologies Co., Ltd. Floor 17th, Tower B, Huizhi Mansion, No.9 Xueqing Road, Haidian District, Beijing, China FCC ID: ZD3FTE401 Report Type: Product Type: Original Report eP ass FI DO®- NF C S ecur ity Key Test Engineer: CK Huang Report Number: RKSA190528053-00A Report Date: 2019-06-20 Ray Wang Reviewed By: EMC Leader Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan,Jiangsu province, China Tel: +86-0512-86175000 Fax: +86-0512-88934268 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0.

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A TABLE OF CONTENTS GENERAL INFORMATION .......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S) .............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................3 SYSTEM TEST CONFIGURATION ..........................................................................................................................4 JUSTIFICATION .............................................................................................................................................................4 EUT EXERCISE SOFTWARE ..........................................................................................................................................4 SPECIAL ACCESSORIES .................................................................................................................................................4 EQUIPMENT MODIFICATIONS .......................................................................................................................................4 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................................4 BLOCK DIAGRAM OF RADIATED TEST SETUP...............................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 FCC §15.107 –CONDUCTED EMISSIONS ...............................................................................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 MEASUREMENT UNCERTAINTY ....................................................................................................................................7 EUT SETUP ..................................................................................................................................................................7 EMI TEST RECEIVER SETUP .........................................................................................................................................8 TEST PROCEDURE ........................................................................................................................................................8 TEST EQUIPMENT LIST AND DETAILS ...........................................................................................................................8 CORRECTED FACTOR & OVER LIMIT CALCULATION....................................................................................................8 TEST DATA ..................................................................................................................................................................9 FCC §15.109 - RADIATED EMISSIONS .................................................................................................................11 APPLICABLE STANDARD ............................................................................................................................................11 MEASUREMENT UNCERTAINTY ..................................................................................................................................11 EUT SETUP ................................................................................................................................................................11 EMI TEST RECEIVER SETUP .......................................................................................................................................12 TEST PROCEDURE ......................................................................................................................................................12 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................12 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................12 TEST DATA ................................................................................................................................................................13 FCC Part 15B Page 2 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A GENERAL INFORMATION Product Description for Equipment under Test (EUT) Applicant Feitian Technologies Co., Ltd. Test Model Titan Security Key K40T Series Model K40T, ePass FIDO®-NFC Product ePass FIDO®-NFC Security Key Rate Voltage DC 5V Dimension 51mm(L)* 18.5mm(W)*7 mm(H) * Note: The difference between tested model and series model was explained in the declaration letter. *All measurement and test data in this report was gathered from production sample serial number: 20190528053. (Assigned by BACL, Kunshan). The EUT was received on 2019-05-28. Objective This report is prepared on behalf of Feitian Technologies Co., Ltd. in accordance with Part 2-Subpart J, and Part 15-Subparts A and B of the Federal Communication Commission’s rules. The objective of the manufacturer is to determine the compliance of EUT with FCC Part 15, Class B device. Related Submittal(s)/Grant(s) No related submittal(s)/Grant(s). Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2014, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Kunshan). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Kunshan) to collect test data is located on the No.248 Chenghu Road, Kunshan, Jiangsu province, China. Bay Area Compliance Laboratories Corp. (Kunshan) Lab is accredited to ISO/IEC 17025 by A2LA (Lab code: 4323.01), the FCC designation No. CN1185 under the FCC KDB 974614 D01 and CAB identifier CN0004 under the ISED requirement. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2014. FCC Part 15B Page 3 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A SYSTEM TEST CONFIGURATION Justification The system was configured for testing in a typical fashion (as normally used by a typical user). Test mode: Data Transmission EUT Exercise Software No exercise software was used to test. Special Accessories No special accessory was used. Equipment Modifications No modification was made to the EUT tested. Support Equipment List and Details Manufacturer Description Model Serial Number DELL Notebook GX620 D65874152 DELL Adapter LA65NS0-00 DF263 Logitech Mouse M-U0026 HS529HB BOLD Earphone / / External I/O Cable Cable Description Length (m) From/Port To USB Cable 1.0 Notebook Mouse Earphone Cable 0.8 Notebook Earphone FCC Part 15B Page 4 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A Block Diagram of Radiated Test Setup AC Source EUT Notebook Adapter Non-Conductive Table 80cm Earphone Mouse Above Ground Plane 1.5m*1.0m*0.8m Table FCC Part 15B Page 5 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A SUMMARY OF TEST RESULTS FCC Rules Description of Test Results §15.107 Conducted Emissions Compliant §15.109 Radiated Emissions Compliant FCC Part 15B Page 6 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A FCC §15.107 –CONDUCTED EMISSIONS Applicable Standard According to FCC§15.107 Measurement Uncertainty Input quantities to be considered for conducted disturbance measurements maybe receiver reading, attenuation of the connection between LISN and receiver, LISN voltage division factor, LISN VDF frequency interpolation and receiver related input quantities, etc. Item Measurement Uncertainty Ucispr AMN 150kHz~30MHz 3.19 dB 3.4 dB Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the uncertainty. EUT Setup The measurement procedure of EUT setup is according with ANSI C63.4-2014. The related limit was specified in FCC Part 15.107 Class B. The external I/O cables were draped along the test table and formed a bundle 30 to 40 cm long in the middle. The spacing between the peripherals was 10 cm. FCC Part 15B Page 7 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A EMI Test Receiver Setup The EMI test receiver was set to investigate the spectrum from 150 kHz to 30 MHz During the conducted emission test, the EMI test receiver was set with the following configurations: Frequency Range IF B/W 150 kHz – 30 MHz 9 kHz Test Procedure During the conducted emission test, the adapter was connected to the outlet of the LISN. Maximizing procedure was performed on the six (6) highest emissions of the EUT. All final data was recorded in the Quasi-peak and average detection mode. Test Equipment List and Details Calibration Calibration Manufacturer Description Model Serial Number Date Due Date Rohde & Schwarz EMI Test Receiver ESR 1316.3003K03-102454-Qd 2018-06-25 2019-06-24 Rohde & Schwarz LISN ENV216 3560655016 2018-11-30 2019-11-29 Audix Test Software e3 V9 -- -- MICRO-COAX Coaxial Cable Cable-6 006 2018-09-08 2019-09-07 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Kunshan) attests that all calibrations have been performed in accordance to requirements that traceable to National Primary Standards and International System of Units (SI). Corrected Factor & Over Limit Calculation The Corrected factor is calculated by adding LISN VDF (Voltage Division Factor), Cable Loss and Transient Limiter Attenuation. The basic equation is as follows: Factor (dB) = LISN VDF (dB) + Cable Loss (dB) + Transient Limiter Attenuation (dB) The “Over Limit” column of the following data tables indicates the degree of compliance with the applicable limit. For example, an Over Limit of 7dB means the emission is 7 dB above the limit. The equation for Over Limit calculation is as follows: Over Limit (dB) = Read level (dBμV) + Factor (dB) - Limit (dBμV) FCC Part 15B Page 8 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A Test Data Environmental Conditions Temperature: 22℃ Relative Humidity: 50 % ATM Pressure: 101.0 kPa The testing was performed by Lee Li on 2019-06-19. Test mode: Data Transmission Line: FCC Part 15B Page 9 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A Neutral: Note: 1) Factor (dB) = LISN VDF (dB) + Cable Loss (dB) + Transient Limiter Attenuation (dB) 2) Over Limit (dB) = Read level (dBμV) + Factor (dB) - Limit (dBμV) FCC Part 15B Page 10 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A FCC §15.109 - RADIATED EMISSIONS Applicable Standard FCC §15.109 Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Item Measurement Uncertainty Ucispr Radiated Emission 30MHz~1GHz 6.11dB 6.3 dB Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the uncertainty. EUT Setup Below 1GHz: The radiated emission tests were performed in the 3 meters chamber test site, using the setup accordance with the ANSI C63.4-2014. The specification used was the FCC Part 15.109 Class B limits. FCC Part 15B Page 11 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A EMI Test Receiver Setup The system was investigated from 30 MHz to 1 GHz. During the radiated emission test, the EMI test receiver was set with the following configurations: Frequency Range RBW Video B/W IF B/W Detector 30MHz – 1000 MHz 120 kHz 300 kHz 120kHz QP Test Procedure Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. If the maximized peak measured value complies with under the QP limit more then 6dB,then it is unnecessary to perform an QP measurement. Test Equipment List and Details Calibration Calibration Manufacturer Description Model Serial Number Date Due Date Sonoma Instrument Amplifier 310N 185700 2018-08-14 2019-08-13 Rohde & Schwarz EMI Test Receiver ESCI 100195 2018-11-30 2019-11-29 Sunol Sciences Broadband Antenna JB3 A090314-2 2016-12-26 2019-12-25 Champrotek Chamber Chamber A T-KSEMC049 - - R&S Auto test Software EMC32 100361 - - MICRO-COAX Coaxial Cable Cable-8 008 2018-08-15 2019-08-14 MICRO-COAX Coaxial Cable Cable-9 009 2018-08-15 2019-08-14 MICRO-COAX Coaxial Cable Cable-10 010 2018-08-15 2019-08-14 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Kunshan) attests that all calibrations have been performed in accordance to requirements that traceable to National Primary Standards and International System of Units (SI). Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7 dB means the emission is 7 dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude FCC Part 15B Page 12 of 13

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA190528053-00A Test Data Environmental Conditions Temperature: 23.1 ℃ Relative Humidity: 52 % ATM Pressure: 101.4 kPa The testing was performed by CK Huang on 2019-05-30. Test mode: Data Transmission 30MHz ~ 1GHz: 80 60 Level in dBμV/ 40 20 0 30M 50 60 80 100M 200 300 400 500 800 1G Frequency in Hz Frequency Max Peak Limit Margin Height Azimuth Corr. Pol (MHz) (dBμV/m) (dBμV/m) (dB) (cm) (deg) (dB/m) 30.242500 30.21 40.00 9.79 100.0 V 8.0 -4.1 55.947500 26.64 40.00 13.36 100.0 V 55.0 -17.8 127.485000 35.85 43.50 7.65 100.0 V 201.0 -11.5 153.553750 31.45 43.50 12.05 200.0 H 150.0 -12.5 196.112500 31.79 43.50 11.71 100.0 V 211.0 -12.6 232.366250 31.46 46.00 14.54 200.0 H 71.0 -12.2 *****END OF REPORT***** FCC Part 15B Page 13 of 13


Document Created: 2019-07-05 23:06:10
Document Modified: 2019-07-05 23:06:10
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC