18_K5(708JBU) RFExp r1

FCC ID: ZCB-K5

RF Exposure Info

Download: PDF
FCCID_4222340

MPE REPORT FCC ID: ZCB-K5 Date of issue: Mar. 20, 2019 Report Number: MTi190319E064 Sample Description: IP Camera Model(s): K5（708JBU）, Q5 ( 636JBU), W4（757JBU）, W5 （758JA）, W6（791JA）, 702JBU, 705JBU, 632JBU, 635JBU, 754JBU Applicant: Shenzhen Smart-eye Digital Electronics Co.,Ltd Address: #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China Date of Test: Feb. 23, 2019 to Mar. 20, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 4 - Report No.: MTi190319E064 TEST RESULT CERTIFICATION Applicant’s name: Shenzhen Smart-eye Digital Electronics Co.,Ltd Address: #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China Manufacture's name: Shenzhen Smart-eye Digital Electronics Co.,Ltd Address: #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China Product name: IP Camera Trademark: N/A Model name: K5（708JBU） Series model: Q5 ( 636JBU), W4（757JBU）, W5（758JA）, W6（791JA）, 702JBU, 705JBU, 632JBU, 635JBU, 754JBU The wireless module used in the product is the same, just Difference in series models: different in appearance and color. RF Exposure Procedures: KDB 447498 D01 v06 This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Orange Chen Mar. 20, 2019 Reviewed by: Blue Zheng Mar. 20, 2019 Approved by: Smith Chen Mar. 20, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 3 of 4 - Report No.: MTi190319E064 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R2) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.14115926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 4 of 4 - Report No.: MTi190319E064 Measurement Result WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, 802.11n HT40: 2422-2452MHz Power density limited: 1mW/ cm2 Antenna Type: Wifi Antenna: Metal Antenna; WIFI antenna gain: 2dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(2/10)=1.58 Tune- Power conducted Evaluation result up Max Antenna density Channel power at 20cm power Limits Freq. modulation tune-up power Gain Power (MHz) (dBm) (dBm) (dBm) (mW) Numeric density(mW/cm2 ) (mW/cm2) Ant A Ant A Ant A Ant A Ant A Ant A 2412 13.20 13±1 14 25.118864 1.58 0.00790 1 2437 802.11b 13.14 13±1 14 25.118864 1.58 0.00790 1 2462 12.22 13±1 14 25.118864 1.58 0.00790 1 2412 12.18 12±1 13 19.952623 1.58 0.00627 1 2437 802.11g 12.17 12±1 13 19.952623 1.58 0.00627 1 2462 11.86 12±1 13 19.952623 1.58 0.00627 1 2412 11.23 11±1 12 15.848932 1.58 0.00498 1 802.11n 2437 11.63 11±1 12 15.848932 1.58 0.00498 1 H20 2462 10.70 11±1 12 15.848932 1.58 0.00498 1 2422 8.19 8±1 9 7.9432823 1.58 0.00250 1 802.11n 2437 7.98 8±1 9 7.9432823 1.58 0.00250 1 H40 2452 7.22 8±1 9 7.9432823 1.58 0.00250 1 Conclusion: For the max result: 0.00790≤ 1.0 for 1g SAR, No SAR is required. ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2019-04-01 14:24:25
Document Modified: 2019-04-01 14:24:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC