MTi19082805-1E2_MPE 20CM

FCC ID: ZCB-637JBU

RF Exposure Info

Download: PDF
FCCID_4507909

MPE REPORT FCC ID: ZCB-637JBU Date of issue: Oct. 14, 2019 Report number: MTi19082805-1E2 Sample description: IP Camera Model(s): 637JBU, 706JBU, 634JBU, 638JBU, 639JBU, 640JBU, 754JA, 758JCQ, 759JCQ, 791JA, Q6, Q7, Q8, W5S, W6, W7 Applicant: Shenzhen Smart-eye Digital Electronics Co., Ltd Address: #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China Date of test: Sept. 04, 2019 to Oct. 14, 2019 Shenzhen Microtest Co., Ltd. http://www.mtitest.com This test report is valid for the tested samples only. It cannot be reproduced except in full without prior written consent of Shenzhen Microtest Co., Ltd. Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

- Page 2 of 4 - Report No.: MTi19082805-1E2 TEST RESULT CERTIFICATION Applicant’s name: Shenzhen Smart-eye Digital Electronics Co., Ltd Address: #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China Manufacture's name: Shenzhen Smart-eye Digital Electronics Co., Ltd Address: #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China Product name: IP Camera Trademark: N/A Model and/or type reference . : 637JBU Serial model ........................... : 706JBU, 634JBU, 638JBU, 639JBU, 640JBU, 754JA, 758JCQ, 759JCQ, 791JA, Q6, Q7, Q8, W5S, W6, W7 RF exposure procedures ....... : KDB 447498 D01 v06 This device described above has been tested by Shenzhen Microtest Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Tested by: Danny Xu Oct. 14, 2019 Reviewed by: Blue Zheng Oct. 14, 2019 Approved by: Smith Chen Oct. 14, 2019 Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China

Microtest M M ts H — Page 3 of 4 — Report No.: MTi19082805—122 RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range [Electric fieldstrength. Magnetic field strength |POWe! density |averaging time (mHz) (Wm) (Amm) (mWiem) (minutes) (A) Limits for Occupational/Controlled Exposure o 330 614 1e3 *00 8 Boso teazn 4 cor ~sowr? s 20—300 614 a.163 1.0 s oo1 amo woo 8 1,200—100 500 s s (B) Limits for General Population/UncontrolledExposure o3134 614 163 ~100 E 13030 sn 2 19 en 30 so—zo0 ars o o73 02 5o soo1 50o #1500 a 1500—100 poo C Eq 1= frequency in MHz *= Plane—wave equnalent power density MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4pi*R®) Where Pd= Power density in mW/cm2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm{20cm) Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total powerinput to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Tel:(86—755)88850 135 Fax: (86—755) saet so136 Web: hitpiwww.mttest.com E—mail mti@§1mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixang, Bac‘an Distrct, Shenzhen, Guangdong, China

- Page 4 of 4 - Report No.: MTi19082805-1E2 Measurement Result WIFI: Operation Frequency: WIFI 802.11b/g/n HT20: 2412-2462MHz, 802.11n HT40: 2422-2452MHz, Power density limited: 1mW/ cm2 Antenna Type: Wifi Antenna: PIFA Antenna; WIFI antenna gain: 1.73dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(1.73/10)=1.49 Tune Power conducte -up Ante Evaluation result Max density d power powe nna at 20cm Chann Limits modulatio r el Freq. n tune-up power Gain Power (MHz) (dBm (dBm) (dBm Num density(mW/cm (mW/cm ) (mW) ) eric 2) 2) Ant A Ant A Ant A Ant A Ant A Ant A 2412 8.74 9±1 10 10 1.49 0.00296 1 2437 802.11b 9.39 9±1 10 10 1.49 0.00296 1 2462 8.57 9±1 10 10 1.49 0.00296 1 2412 9.35 9±1 10 10 1.49 0.00296 1 2437 802.11g 9.9 9±1 10 10 1.49 0.00296 1 2462 9.21 9±1 10 10 1.49 0.00296 1 2412 9.25 9±1 10 10 1.49 0.00296 1 802.11n 9.81 9±1 10 10 1.49 0.00296 2437 1 H20 2462 9.16 9±1 10 10 1.49 0.00296 1 2422 8.25 8±1 9 7.9432823 1.49 0.00235 1 802.11n 8.48 8±1 9 7.9432823 1.49 0.00235 2437 1 H40 2452 8.34 8±1 9 7.9432823 1.49 0.00235 1 Conclusion: For the max result: 0.00296≤ 1.0 for 1g power density limit, No SAR is required. ----END OF REPORT---- Tel:(86-755)88850135 Fax: (86-755) 88850136 Web: http://www.mtitest.com E-mail: mti@51mti.com Address: No.102A & 302A, East Block, Hengfang Industrial Park, Xingye Road, Xixiang, Bao'an District, Shenzhen, Guangdong, China


Document Created: 2019-11-08 20:58:03
Document Modified: 2019-11-08 20:58:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC