User Manual

FCC ID: ZCB-637JBU

Users Manual

Download: PDF
FCCID_4499290

FCC WARNING This device complies with part 15 of the FCC Rules. EN DE FR IT JP Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance Quick Installation Guide could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply 1080P HD Wireless Cloud IP Camera with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

IN THE BOX 1×quick installation guide 1×power adapter 1 Lens 6 Speaker 1×camera mounting accessories 2 Photosensor 7 Indicator lights 3 Infrared LED 8 Reset button 4 Microphone 9 Power port 2 1 3 5 Micro SD Card Slot 4 5 6 ·········· INDICATOR LIGHTS STATUS ·········· 7 8 9 Light Status Camera Status FRONT BACK Red light on Camera is powered on Red and blue light Waiting to connect now DOWHUQDWHO\þDVKLQJ Camera is connecting Wi-Fi 2 3 Blue light solid Succeeded to connect Wi-Fi 7 6 1 1.Reset camera to factory setting 8 5 4 9 Warm note: Please make sure your router is connected to Internet. FRONT BACK EN 01 02 EN

··················· EASY SET UP ··················· Step 2 Account Register Step 1 Download 1 Open AJCloud App, Go to the App Store or Google Play to then select Sign up. search and download “AJCloud” APP to your supported devices. 2 Enter your email. Sign in 3 Create a password AJCloud APP icon at least 8 characters 3 long. Your password must include three of the following: Or please scan below QR code to download · At least one uppercase letter · At least one “AJCloud” to your Android or Apple device. lowercase letter· At least one number 4 You will receive an email with your Activation Link.Open the link to activate your account. 5 Go back to login your account after activation successful. EN 03 04 EN

Step 3 Power on camera EN DE FR IT JP Power on the camera with the supplied power cord and put the camera near to router. If you see the blue DQGUHGOLJKWVþDVKLQJFDPHUD:DLWLQJWRFRQQHFW Schnelle Installation Anleitung Step 4 Connect to network 1080P HD Wireless Cloud IP Kamera Connect your phone to 2.4G Wi-Fi (5G is not supported). Open the AJCloud app. Please tap [ Add device ],and choose the “Dome Camera” to connect. Add device EN 05

In der Box 1x Installation Anleitung 1x Netzteil 1 Linse 6 Lautsprecher 1x Kamera 1x Montage Material 2 Fotowiderstand 7 Indicator Lamp 3 Infrarot LED 8 Reset Knopf 4 Mikrofon 9 Strom Port 2 1 3 5 Kartenslot 4 5 6 ·········· STATUS DER INDIKAOR LICHTS ·········· 7 8 9 Lichts Status Kamera Status Vorderseite Rücken Rotes Licht an Kamera hat eingeschalcht Rotes und Blaues Licht Warten auf der WLAN verbinden blinken abwechselnd Blaues Licht blinkt Kamera verbindet WLAN 2 3 Blaues Licht blinkt stabil Erfogreich mit WLAN verbunden 7 6 1 1.Auf der Werkseinstellung zurücksetzen 8 5 Rotees Licht blinkt schnelle 2.Kamera aktualisiert Firmware 4 9 Hinweis: Stellen Sie sicher, dass Ihr Router mit dem Netzwerk verbunden ist. Vorderseite Rücken DE 07 08 DE

·············· Einfache Einstellung ·············· Schritt 2 Konto Registrieren Schritt 1 Downloaden Gehen Sie bitte zum App Store oder zu 1 Öffnen Sie die Google Play und laden Sie die “AJCloud” AJCloud App, und App auf Ihr Smartphone oder Tablet. wählen Sie dann Anmelden. 2 Geben Sie bitte Ihre Email ein. Einloggen AJCloud APP icon 3 Erstellen Sie ein Passwort mit mindestens 8 Zeichen. Ihr Passwort muss drei der folgenden Oder bitte scannen Sie den QR Code, Elemente enthalten: um die “AJCloud” auf Ihr Android oder Apple Gerät herunterzuladen · Mindestens ein Großbuchstabe · Mindestens ein Kleinbuchstabe · Mindestens eine Zahl. 4 Sie werden eine E-Mail mit Ihrem Aktivierungslink erhalten . Öffnen aktivieren.Sie bitte den Link, um Ihr Konto zu aktivieren. 5 Melden Sie sich nach erfolgreicher Aktivierung wieder bei Ihrem Konto an. DE 09 10 DE

Schritt 3 Schließen Kamera an EN DE FR IT JP Schalten Sie die Kamera mit dem mitgelieferten Netzkabel ein und liegen Sie die Kamera in die Nähe des Routers . Wenn Sie Rotes und Blaues Licht blinken abwechselnd gesenhen haben,warten bitte auf der WLAN verbinden. Guide d’Installation Rapide Schritt 4 Verbinden zum Netzwerk 3+'&DP«UD,3&ORXG6DQVýO Verbinden Sie Ihr Mobiltelefon mit 2.4 Ghz WLAN (5G wird nicht unterstützt).Öffnen Sie bitte die AJCloud APP.Klicken bitte [Gerät hinzufügen], und wählen Sie [Kuppel Kamera] zu verbinden. DE 11

DANS LA BOÎTE 1x Guide d’Installation Rapide 1x Adaptateur d’alimentation 1 Lentilles 6 Haut-parleur 1x Caméra Accessoires de montage 2 Capteur de Photo 7 Lumières d’Indicateur 3 LED Infrarouge 8 Bouton Reset 4 Microphone 9 Port d’alimentation 2 1 3 5 Fente pour Carte Micro SD 4 5 6 ················· ÉTAT DES VOYANTS ················· 7 8 9 État des voyants État de la caméra DEVANT DOS Le voyant rouge s’allume La caméra est déjà alimentée Les voyants rouge et bleu En attente de connexion maintenant clignotent en alternance La voyant bleu clignote La caméra se connecte au Wi-Fi en cours 2 3 Le voyant bleu est stable Connectée au Wi-Fi avec succès 7 6 1 La caméra est réinitialisée aux réglages d’usine 8 5 La voyant rouge clignote rapidement 4 /DFDP«UDPHW¢MRXUOHýUPZDUH 9 N. B: Assurez-vous que votre routeur est connecté au réseau DEVANT DOS FR 13 14 FR

··········· INSTALLATION FACILE ··········· Étape 2: Inscription du Compte Étape 1: Télécharger Aller sur l’App Store ou Google Play pour 1 Lancer l’application rechercher et télécharger l’application AJCloud, et puis ‘‘AJCloud’’ sur votre smartphone. choisissez [Inscrivez -vous]. 2 Entrer votre email. Se connecter AJCloud APP icon 3 Créer un mot de passe d’au moins 8 caractères. Votre mot de passe doit contenir trois éléments suivants: Ou scanner le code QR ci-dessous pour télécharger ‘‘AJCloud’’ sur votre smartphone -Au moins une lettre majuscule -Au moins une lettre Android ou iOS. miniscule -Au moins un numéro 4 Vous receverez un email avec votre lien d’activation. Ouvrir le lien pour activer votre compte. 5 Retourner à la connexion de votre compte après avoir réussi à activer. FR 15 16 FR

Étape 3 Alimenter la caméra EN DE FR IT JP Alimenter la caméra avec l’alimentation fournie et placer la caméra près du routeur. Si vous voyez les voyants rouge et bleu clignotent HQDOWHUQDQFHFHODVLJQLýHTXHODFDP«UDHVWWUDLQ de connecter. Guida di Rapida Installazione Étape 4: Se connecter au réseau 1080P HD Cloud IP Camera senza Fili Connecter votre smartphone au 2.4Ghz Wi-Fi ( 5G n’est pas supporté ). Lancer l’application AJCloud, et taper sur [Ajouter Appareil], choisir [Caméra Dôme] pour connecter. FR 17

Confezione 1x guida di rapida installazione 1x camera 1 Obiettivo 6 Altoparlante 1x alimentatore Accessori di montaggio 2 6HQVRUHIRWRJUDýFR 7 Luci indicatrici 3 LED infrarossi 8 Pulsante di reset 4 Microfono 9 Porta di alimentazione 2 1 3 5 Slot Micro SD 4 5 6 ············ STATO DI LUCI INDICATRICI ············ 7 8 9 Stato di luce Stato di camera Anteriore Posteriore Luce rossa accesa È alimentata Luci rosso e blu lampeggiano In attesa di connessione alternativamente Luce blu lampeggia ŠFROOHJDWDDOZLý 2 3 /XFHEOXýVVD &ROOHJDPHQWRDOZLýULXVFLWR 7 6 1 1.La camera viene ripristinata 8 5 Luce blu lampeggia velocemente ,OýUPZDUHYLHQHDJJLRUQDWR 4 9 N B : Assicurati che il router sia connesso a Internet. Anteriore Posteriore I T 19 20 I T

·············· INSTALLAZIONE FACILE ·············· Passo 2 Registra un account Passo 1 Scarica Scarica la app AJCloud da App Store o da 1 Apri AJCloud App e Google Play sui tuoi dispositivi supportati. seleziona Registrati 2 Inserisci il tuo indirizzo email. Accedi icona di App AJCloud 3 Crei una password con almeno 8 caratteri che ha almeno i seguenti: O esegui scansione del codice QR per scaricare AJCloud sul tuo dispositivo Android o Apple. ·Almeno una lettera maiuscola ·Almeno una lettera minuscola ·Almeno un numero 4 Riceverai una mail con un link di attivazione. Apri il link per attivare il tuo account. 5 Ritorni ad accederti dopo aver attivato l’account con successo. I T 21 22 I T

Passo 3 Alimenta camera EN DE FR IT JP Alimenta la camera con l’alimentatore nella confezione e mettila vicino al router. Mentre vedi che le luci blu e rossa lampeggiano, la camera comincia a collegarsi. クイック取扱説明書 Passo 4 Collega alla rete wifi 1080P HD ワイヤレスクラウド IP カメラ &RQQHWWLLOWXRWHOHIRQLQRD*:Lý *QRQª compatibile). Apri la App AJCloud, clicca su [Aggiungi dispositivo] e seleziona Dom Camera per collegarla. FR 23

製品とアクセサリーション 1×カメラ 1×電源 1 レンズ 6 スピーカー 1×取扱説明書（日本語付き）1×取付用部品 2 感光センサー 7 インジケータライト 3 赤外線灯 8 リセットボタン 4 マイクロフォン 9 電源ポート 2 1 3 5 SDカットスロット 4 5 6 ·············· インジケータライト 状態 ·············· 7 8 9 ライト 状態 カメラ状態 正面 背面 赤色ランプが点灯中 電源が入った状態で起動中 赤色ランプと青色ラン 接続の準備中 プが交互に点滅 青色ランプが点滅 WiFiに接続中 2 3 青色ランプが点灯中 WiFiへの接続成功 7 6 1 1.工場出荷時の設定にリセット 8 5 赤色ランプが早く点滅 2.カメラはファームウェアをアップグレード中 4 9 暖かい注：お使いのルーターがインターネットに 接続されていることを確認してください。 正面 背面 JP 25 26 JP

·············· 簡単なセットアップ ·············· 2.アカウント登録 1.ダウンロード IOSシステムはApp Storeで、Androidシステムは 1 AJCloud アプリを Google Playでアプリ「AJ Cloud」を検索、 アプ 開き、 「サインアッ」 リをダウンロードしてください。 を選択します。 2 メールアドレスを 入力。 AJCloud アプリアイコン 3 8文字以上のパスワ ードを作成してください。 パスワードには、 次の3つのを含める必要があります。 もしくは以下のQRコードを読み、「AJ Cloud」 をダウンロードできます。 · 少なくとも1つの大文字 · 少なくとも1つの小文字 · 少なくとも1つの数字 スキャンしてダウンロード 4 アクティベーションリンクが記載されたメー ルが届きますので、リンクを開いてアカウン トをアクティベートしてください。 スキャンしてダウンロード 5 アクティベートに成功した後、アカウントに ログインします。 JP 27 28 JP

3.カメラの電源を入れる カメラをルーターの近くに置いて、付属の電源コ Manufacturer's Name: Shenzhen Smart-eye Digital ードでカメラの電源を入れます。もし青色ランプ Electronics Co., Ltd と赤色ランプが点滅していたら、カメラをWIFIに Sample Description: IP Camera Model number: Q6（637JBU） 接続できることを意味します。 Operating Temperature: ‐10° C to 40° C 4.ネットワークに接続 This product is a fixed location. To comply with RF exposure requirements, a minimum separation distance of 20cm must スマホを2.4G Wi-Fi「この製品は2.4Ghzにのみ対 be maintained between the user’s body and the device, including the antenna. Use only the 応して、5Ghzに対応できません」に接続します。 supplied or an approved antenna. そして、AJCloudアプリを開いて、「デバイスを This device in compliance with the essential requirements 追加」をタップして、「ドームカメラ」を選択し、 and other relevant provisions of WIFIを接続します。 Directive 2014/53/EU. All essential radio test suites have been carried out. 1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS 2. The device complies with RF specifications when the device used at 20cm from your body CE NB RF specification operation frequency range: 2412-2472MHz max. conducted power: 13.73 dBm E.I.R.P support 802.11B/G/N(HT20/40) modulation type: DSSS, OFDM antenna type: PIFA antenna with 1.73 dBi JP 29

DECLARATION OF CONFORMITY I hereby declare that the product Product name: IP Camera Model name: 637JBU(Q6) Series model : 706JBU, 634JBU, 638JBU(Q7), 639JBU(Q8), 640JBU, 754JA, 758JCQ(W5S), 759JCQ(W7), 791JA(W6） Trademark: N/A HW: 25-0636JBU103 SW: V1.0 (Name of product, type or model, batch or serial number) satisfies all the technical regulations applicable to the product within the scope of Council Directives 2014/53/EU, 2014/35/EU and 2014/30/EU: and declare that the same application has not been lodged with any other notified body. EN 300 328 V2.1.1 (2016-11) (Draft) EN 301 489-1 V2.2.2 (2019-09) (Draft) EN 301 489-17 V3.2.0 (2017-03) EN 55032:2015+AC:2016 EN 55035:2017 EN 61000-3-2:2014 EN 61000-3-3:2013 EN 60950-1: 2006+A11: 2009+A1: 2010+A12: 2011+A2: 2013 EN62311: 2008 (Title(s) of regulations, standards, etc.) All essential radio test suites have been carried out. NOTIFIED BODY: MiCOM Labs Inc  Address: 575 Boulder Court, Pleasanton, California 94566 USA Identification Number: 2280

MANUFACTURER or AUTHORISED REPRESENTATIVE:  Address: Shenzhen Smart-eye Digital Electronics Co., Ltd #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China This declaration is issued under the sole responsibility of the manufacturer and, if applicable, his authorised representative. Point of contact: Company: Shenzhen Smart-eye Digital Electronics Co., Ltd Telephone : +86-755-89390391 Fax: +86-755-89390380 (Name, telephone and fax number) #6 Northern Zone, Shangxue S&T City, Bantian, Longgang District, Shenzhen, China (Place, date of issue) (Signature) Bella Zheng Engineer (Name and title in block letters)


Document Created: 2019-10-30 15:49:42
Document Modified: 2019-10-30 15:49:42
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC