RF Exposure Test Report

FCC ID: ZBCAC67F1

RF Exposure Info

Download: PDF
FCCID_4047849

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, China 518057 Telephone: +86 (0) 755 2601 2053 Report No.: SZEM180500378402 Fax: +86 (0) 755 2671 0594 Page: 1 of 11 Email: ee.shenzhen@sgs.com Human Exposure Report Application No.: SZEM1805003784CR Applicant/ Manufacturer: SHENZHEN DNS INDUSTRIES CO., LTD. Address of Applicant/ 23/F Building A, Shenzhen International Innovation Center, No.1006 Shennan Manufacturer: Road, Futian, Shenzhen, China Factory: HUIZHOU D&S CABLE CO., LTD. Address of Factory: LONGJIN DONGJIANG INDUSTRY ZONE, SHUIKOU, HUICHENG, HUIZHOU, GUANGDONG, CHINA Equipment Under Test (EUT): EUT Name: WIRELESS CAR CHARGER Model No.: AC67F1 Trade Mark: DNS, omars, novoo FCC ID: ZBCAC67F1 Standards: 47 CFR PART 1, SUBPART I, SECTION 1.1310 Date of Receipt: 2018-05-14 Date of Test: 2018-05-16 TO 2018-05-17 Date of Issue: 2018-05-22 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above. Keny Xu EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only.

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEMTEOs003reac2 Page: 2ot 11 1 Contents Page 1. covenprce 1 contents 2 eenena. inrormation, a 21. bemusortEUt : 22 DescurnoworSterontUies a 23. Tesrtocmon a 24. TesrProum a 25. DeviamonrmonStavomos a 26— AevorteurmesrronStaronzoConomons a s eaupments usen punic tes s a Testresutts s «10 RfExrowserest s 4.1.1 EULT Operation s 4.1.2 MeasurementData 7 s photocnapH

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 3 of 11 2 General Information 2.1 Details of E.U.T. Power supply: Input: DC 5V/2A Output: DC 5V/1A Max 5W Operation frequency: 110.58-180.29 kHz Modulation type: Load modulation Antenna type: Inductive Loop Coil Antenna 2.2 Description of Support Units Description Manufacturer Model No. Serial No. Adapter Apple A1357 W010A051 REF. No.SEA0500 Type-C Cable SGS N/A REF. No.SEA0705 E-loading Provided by client N/A DC 5V/1A This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 4 of 11 2.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 2.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • CNAS (No. CNAS L2929) CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories) for the competence in the field of testing. • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-823, R-4188, T-1153 and C-2383 respectively. • FCC – Registration No.: 556682 SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 556682. • Industry Canada (IC) The 10m Semi-anechoic chambers of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC Lab has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-3. 2.5 Deviation from Standards None. 2.6 Abnormalities from Standard Conditions None. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 5 of 11 3 Equipments Used during Test Inventory Cal. Due date Item Test Equipment Manufacturer Model No. No. (yyyy-mm-dd) 1 Shielding Room SAEMC MSR733 SEM001-09 2020-05-09 Electric and 2 Magnetic Field Narda EHP-50F EMC092 2019-02-06 Analyzer This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 6 of 11 4 Test Results 4.1 RF Exposure test Test Requirement: 47 CFR PART 1, Subpart I, Section 1.1310 Measurement Distance: 15cm/10cm/4cm/0cm Limit: Frequency range Electric field strength Magnetic field strength Power density Averaging time (MHz) (V/m) (A/m) (mW/cm2) (minutes) (A) Limits for Occupational/Controlled Exposures 0.3-3.0 614 1.63 *(100) 6 3.0-30 1842/f 4.89/f *(900/f2) 6 30-300 61.4 0.163 1.0 6 300-1500 / / f/300 6 1500-100,000 / / 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 30 1.34-30 824/f 2.19/f *(180/f2) 30 30-300 27.5 0.073 0.2 30 300-1500 / / f/1500 30 1500-100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density RF exposure compliance will need to be determined with respect to 1.1307(c) and (d) of the FCC rules. The emissions should be within the limits at 300kHz in Table 1 of 1.1310(use the 300kHz limits for 150kHz:614V/m,1.63A/m). 4.1.1 E.U.T. Operation Operating Environment: Temperature: 25.0 °C Humidity: 51 % RH Atmospheric Pressure: 1015 mbar EUT Operation: This device has been tested the worst status of full load and the device has been tested with mobile phone at zero charge, intermediate charge, and full charge. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS—CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM1eosoosraso2 Page: 7ot 1 412 Measurement Data 1: Output Voliag C 5; The mas oulput current ~1A;Calculation ofresistor value=30n Electric Fiekd Emissions Test Test Test Probe Measure Resul(Vim) 50% Limit Result frequency Distanse(om)| Position (Wie) Side1 s70 sor Pass Suez na sor Pacs o Suee es sor Pass Suea s sor Pass Top 123 so7 Pass Sue7 as0 sor Pass Suez sa2 sor Pass a Sues s25 sor Pass Suea as2 sor Pass To sor sor Pass 1adi Suen 204 sor Pass Suez 2s sor Pass 10 Sues 2a1 sor Pass Suea 202 sor Pass To 370 sor Pass Side1 133 so7 Pass Suee Los sor Pass is Sues Lso sor Pass Suea 133 sor Pass To 244 sor Pass

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 8 of 11 Magnetic Field Emissions Test Test Test Probe Measure Result (A/m) 50%Limit Result frequency Distance Position (A/m) (cm) Side 1 0.0079 0.815 Pass Side 2 0.0114 0.815 Pass 0 Side 3 0.0215 0.815 Pass Side 4 0.0211 0.815 Pass Top 0.1134 0.815 Pass Side 1 0.0075 0.815 Pass Side 2 0.0101 0.815 Pass 4 Side 3 0.0206 0.815 Pass Side 4 0.0201 0.815 Pass Top 0.1077 0.815 Pass 165.8kHz Side 1 0.0067 0.815 Pass Side 2 0.0091 0.815 Pass 10 Side 3 0.0185 0.815 Pass Side 4 0.0174 0.815 Pass Top 0.0963 0.815 Pass Side 1 0.0067 0.815 Pass Side 2 0.0091 0.815 Pass 15 Side 3 0.0173 0.815 Pass Side 4 0.0163 0.815 Pass Top 0.0907 0.815 Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 9 of 11 1: Mobile phone has been charge at zero charge, intermediate charge, and full charge. Electric Field Emissions Test Test Test Probe Measure Result (V/m) 50% Limit Result frequency Distance Position zero intermedi full (V/m) (cm) charge ate charge charge Side 1 6.90 6.57 6.37 307 Pass Side 2 8.59 8.17 7.92 307 Pass 0 Side 3 8.25 7.86 7.63 307 Pass Side 4 6.92 6.59 6.34 307 Pass Top 12.70 12.08 11.71 307 Pass Side 1 4.44 4.27 4.18 307 Pass Side 2 5.53 5.37 5.11 307 Pass 4 Side 3 5.42 5.14 4.99 307 Pass Side 4 4.45 4.23 4.15 307 Pass Top 8.25 7.85 7.61 307 Pass 165.8kHz Side 1 2.12 2.00 1.94 307 Pass Side 2 2.67 2.48 2.43 307 Pass 10 Side 3 2.42 2.33 2.24 307 Pass Side 4 2.08 1.95 1.92 307 Pass Top 3.81 3.63 3.58 307 Pass Side 1 1.33 1.30 1.26 307 Pass Side 2 1.73 1.61 1.52 307 Pass 15 Side 3 1.66 1.52 1.51 307 Pass Side 4 1.37 1.35 1.28 307 Pass Top 2.51 2.39 2.32 307 Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 10 of 11 Magnetic Field Emissions Test Test Test Probe Measure Result (A/m) 50%Limit Result frequency Distance Position zero intermedi full (A/m) (cm) charge ate charge charge Side 1 0.0080 0.0075 0.0071 0.815 Pass Side 2 0.0111 0.0104 0.0105 0.815 Pass 0 Side 3 0.0214 0.0204 0.0194 0.815 Pass Side 4 0.0213 0.0203 0.0196 0.815 Pass Top 0.1145 0.1077 0.1022 0.815 Pass Side 1 0.0076 0.0075 0.0068 0.815 Pass Side 2 0.0102 0.0096 0.0094 0.815 Pass 4 Side 3 0.0204 0.0196 0.0185 0.815 Pass Side 4 0.0206 0.0194 0.0186 0.815 Pass Top 0.1081 0.1023 0.0969 0.815 Pass 165.8kHz Side 1 0.0063 0.0064 0.0063 0.815 Pass Side 2 0.0096 0.0082 0.0087 0.815 Pass 10 Side 3 0.0187 0.0176 0.0167 0.815 Pass Side 4 0.0173 0.0165 0.0153 0.815 Pass Top 0.0973 0.0915 0.0867 0.815 Pass Side 1 0.0068 0.0064 0.0064 0.815 Pass Side 2 0.0094 0.0086 0.0082 0.815 Pass 15 Side 3 0.0171 0.0165 0.0156 0.815 Pass Side 4 0.0165 0.0155 0.0146 0.815 Pass Top 0.0913 0.0864 0.0816 0.815 Pass This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZEM180500378402 Page: 11 of 11 5 Photographs Please refer to RF exposure Setup. - End of the Report - This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only


Document Created: 2018-10-16 11:11:53
Document Modified: 2018-10-16 11:11:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC