User_Manual

FCC ID: Z9G-EDF76

Users Manual

Download: PDF
FCCID_4068884

Manual Edition 1.0, Aug. 2018 IB-200-R1700A-00 R1700A Smart Home Speaker Edifier International Limited P.O. Box 6264 General Post Office Hong Kong Tel: +852 2522 6989 Fax: +852 2522 1989 www.edifier.com © 2018 Edifier International Limited. All rights reserved. Printed in China NOTICE: For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. Picture for reference only, actual product prevails. User manual | Manuel d’utilisateur | Manual de usuario | Bedienungsanleitung | Manuale dell’utente | Manual do utilizador Important safety instruction Important safety instruction 1. Please read the instructions carefully. Keep it in safe place for future reference. Power warning: 2. Use only accessories approved by the manufacturer. 1. Place the product near the power outlet for easy use. 3. Install the instrument properly by following the instructions in the device connection section. 2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can 4. Using the product in a 0-35℃ environment is recommended. be found on the product plate. 5. To reduce the risk of fire and electric shock, do not expose the product to rain or moisture. 3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time. 6. Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing. 4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution. 7. Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat). 5. Safety warning labels on the housing or bottom of the product or power adaptor. 8. Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product. 9. Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure shock. that may be of sufficient magnitude to constitute a risk of electric shock to persons. 10. Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended). 11. Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable is oriented to the right direction. part inside. Take the product to an authorized service center for repair. 12. Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake. 13. Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless This symbol indicates that the product is for indoor use only. the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately. This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement. 14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first. 15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. Excessively loud music may lead to hearing loss. Please keep the volume in a safe range. For wireless product: 1. Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household 2. Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplane, at gas stations, near wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, automatic gates, automatic fire alarm system or other automated devices. recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the 3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation return and collection systems or contact the retailer where the product was purchased. They can take this product for of the pacemaker or other medical devices. environmental safe recycling. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1 2 English English Unpack the box Illustrations Box Contents Active speaker Passive speaker Ă ā ă Ą Infrared ą receiver Ć 1. Audio signal input 2. Connect to passive speaker 3. Reset ć Remote control 4. Power cable 5. Power switch Ĉ 6. Connect to active speaker ĉ 7. Treble control Ċ 8. Bass control 9. Master volume control Press: mode switch 3.5mm - RCA audio cable Press and hold: disconnect Bluetooth 10. Power indicator Green: PC/AUX mode Blue: Bluetooth mode Speaker connecting cable User manual Red: Wi-Fi mode 3 4 English English Remote control Illustration PC/AUX Input RC20H 1. Mute 2. Power ON/standby ā Ă 3. Volume down 4. Volume up ă Ą ą Ć 5. Bluetooth mode ć PC AUX Ĉ 6. PC mode ĉ  7. Wi-Fi mode   8. AUX mode 9. Previous track (Bluetooth/Wi-Fi mode) 10. Press: play/pause Press and hold: hide/display Wi-Fi hotpot 11. Save 12. Next track (Bluetooth/Wi-Fi mode) Battery installation and replacement Rotate the battery cover based on the arrow direction and remove, correctly install the CR2025 battery into the battery compartment and close cover. WARNING! 1. Don’t swallow the battery; danger of chemical burn. 2. The product includes a wafer battery. Swallowing this battery may lead to injury or death. Do not place the new or old battery in where children can get to it. volume 3. Don’t use the product if the battery cover is missing or not closed, and keep the remote inaccessible to children. 4. Please go to the hospital immediately if the battery is swallowed. 1. Connect speakers using speaker connecting cable. 2. Connect audio source (mobile phone, tablet, etc.) to PC In/AUX In audio input port (note color matching) on the Note: rear panel of the active speaker using 3.5mm-RCA audio cable. 1. Do not place the remote control in places that are hot and humid. 3. Connect the active speaker to the wall outlet using power cable and turn power switch on, power indicator will 2. Do not charge the batteries. be on and the speakers should be ready to go. 3. Remove the batteries when unused for a long period of time. 4. Press the “PC” / “AUX” button on the remote control, or press the “Master volume control” dial on the side 4. The battery should not be exposed to excessive heat such as direct sun, fire or similar. panel of the active speaker to select PC/AUX input mode, the indicator will turn green. 5. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 5 5. Play music and adjust the volume to a desirable level. 6 English English Bluetooth Input Wi-Fi Audio Source EDIFIER R1700A or Blue Wi-Fi audio source volume Press the “ ” button on the remote control, or press the “Master volume control” dial on the side panel of the active speaker to select Wi-Fi mode, the indicator will turn red. Hotspot management 1. As R1700A has self hotspot, it can help you expand Wi-Fi signal range to make Wi-Fi signal & music cover your home. 1. Press the “ ” button on the remote control, or press the “Master volume control” dial on the side panel of the a. Ensure R1700A has been connected to network. active speaker to select Bluetooth mode, the indicator will turn blue. b. Go to your phone’s WLAN or Wi-Fi settings to search for hotspot “EDIFIER_R1700A_xxxx”, and xxxx is the last 2. Set your Bluetooth device (mobile phone, tablet, etc.) to search for and connect to “EDIFIER R1700A”. four digits of the device’s MAC address. 2. Click “EDIFIER_R1700A_xxxx” and enter the default password “12345678”. Note: 3. The hotspot can connect 8 mobile devices simultaneously, please connect as much as you like! * The Bluetooth function of R1700A can only be searched and connected in Bluetooth input. The current Bluetooth connection will be disconnected once the speaker switches to other audio inputs. When switched back to Bluetooth Note: mode, the speaker will try to connect to the last connected Bluetooth device. If needs to modify the password, change the hotspot name, upgrade the firmware of the product’s wireless part, and * Pin code for connection is “0000” if needed. upgrade the MCU program, please connect to the hotspot and then visit “10.10.10.254” via phone browser for * To disconnect Bluetooth, press and hold the “Master volume control” dial on the active speaker or the “ ” button modification and upgrade. on the remote control. * To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP and AVRCP profiles. * Bluetooth connectivity and compatibility may be different between different source devices, depending on the software versions of source devices. 7 8 English English Download and Install App Guide the Speaker to Connect to Wi-Fi Network 2. Go to your phone's Wi-Fi settings and select the 3. Enter the default password “12345678” to join To enjoy all functions of the smart speaker, please download our App and guide the speaker to connect to Wi-Fi Wi-Fi starting with EDIFIER_R1700A to connect. the R1700A Wi-Fi network. network via the App. Please search for and download the “EDIFIER HOME” App in the App store. Note: When guiding the speaker to connect to network, ensure your phone or tablet has been connected to the Wi-Fi network you would like the speaker to connect to. Guide the Speaker to Connect to Wi-Fi Network Enter the Settings password 1. Press the “ ” button on the remote control, or press the “Master volume control” dial on the speaker to select Wi-Fi audio source. 4. The principle of connecting the speaker to network via APP is to broadcast the network name and password the phone or already connected to the speaker. Therefore, after entering the configuration interface: please input network password the phone already connected into the text box, and note the speaker will not connect to the target Wi-Fi network if the password is wrong. The network name textbox will display the Wi-Fi network name the phone already connected by default, if needs to modify, Please enter Wi-Fi please switch to the phone’s configuration interface, then password the phone reconnect to Wi-Fi network and make configurations again. already connected 9 10 English English Guide the Speaker to Connect to Wi-Fi Network Audio Source Mode 1: EDIFIER HOME Cloud Music Playing 5. Search for Edifier wireless Hi-Fi system. 6. The speaker is connecting to network. Operating Guide The relationship between EDIFIER HOME APP and the speaker: the App is actually an advanced interface of the speaker; the user can customize the speaker to fit a specific application environment via App, and also can control playing, choose the favorite radio station or music source via App. Search Find your favorite music by searching for song title, singer and album. Searching for device Connecting Favorites When browsing, press the “ ” icon to add to my favorites; and press the “ ” icon to add to my favorites in playing interface. Press to add device My Music Choose to play local music, my song list, and recent play. TuneIn Listen to my radio station, local radio station, music, talk shows and sports, and listen by location. 7. Press to select “EDIFIER_R1700A_xxxx”, and xxxx is the last four digits of the device’s MAC address. After connecting Amazon Alexa successfully and completing the binding, the speaker can Press “Amazon Alexa” to sign in with Amazon account and enter Amazon Alexa interface; work normally only after the phone switches to the original Bind successfully Press the “In APP Alexa” button to speaker to Alexa; Wi-Fi network. You can take an easily recognizable name for Press and hold the “ ” to speak a channel (also can be a song or an album) or checking weather the speaker. and then release, it will start searching or playing according to voice input. Note: Add More Services After connecting successfully and completing the binding, if the Select to add: online radio station, iHeartRadio, Spotify, TIDAL and Nepster. phone cannot switch to the original Wi-Fi network automatically, please switch manually. 11 12 English English Audio Source Mode 1: EDIFIER HOME Cloud Music Playing Audio Source Mode 2: Line in Input Instructions for how to use Spotify Connect Listen out loud with Spotify Connect 1. Connect your R1700A to your wifi network 2. Open up the Spotify app on your phone, tablet or laptop using the same wifi network 3. Play a song and select Devices Available The user can control the speaker to switch to line in input via 4. Select your R1700A and start listening EDIFIER HOME APP, please refer to “PC/AUX Input” on page 6 to play wired music. The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/third-party-licenses Log in Amazon account and visit the cloud audio library to select what you like. Sign in with Amazon 13 14 English English Specification Troubleshooting Power output: R/L (Treble): 15W+15W Problem Solution R/L (Mid-range and bass): 18W+18W No sound           Frequency response: 60Hz~20KHz            control or remote control. Input: Wi-Fi / Bluetooth / PC / AUX        input is set correctly on the speakers.              Wi-Fi: 2.412-2.462GHz(US) Cannot connect via Bluetooth "     #    $      2.412-2.472GHz(EU) audio input modes, Bluetooth will not connect. Disconnect from any Bluetooth device by pressing and holding in Bluetooth: 2.402-2.480GHz Bluetooth mode, then try again.   #     %< =    operation is within the range. There is no restriction of use.  #      Network pairing and connection >     ?@>J?    is unsuccessful configuration protocol) function. >   $>       = to allow for connecting multiple devices. >            (including WPA and WPA2). >       $>    >          QZ[   Device registration fails (3084) [              The R1700A does not turn on Check if main power is connected, or if the wall outlet is switched on. To learn more about EDIFIER, please visit www.edifier.com For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms. USA and Canada: service@edifier.ca 15 South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information. 16 English English


Document Created: 2018-11-08 16:43:16
Document Modified: 2018-11-08 16:43:16
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC