Users Manual

FCC ID: Z9G-EDF74

Users Manual

Download: PDF
FCCID_3993351

Manual Edition 1.0, July 2018 IB-200-S3000P-00 S3000 Pro Edifier International Limited Multimedia Speaker P.O. Box 6264 General Post Office Hong Kong Tel: +852 2522 6989 Fax: +852 2522 1989 www.edifier.com © 2018 Edifier International Limited. All rights reserved. Printed in China NOTICE: For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. Picture for reference only, actual product prevails. User manual | Manuel d’utilisateur | Manual de usuario | Bedienungsanleitung | Manuale dell’utente | Manual do utilizador Important safety instruction Important safety instruction 1. Please read the instructions carefully. Keep it in safe place for future reference. Power warning: 2. Use only accessories approved by the manufacturer. 1. Place the product near the power outlet for easy use. 3. Install the instrument properly by following the instructions in the device connection section. 2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can 4. Using the product in a 0-35℃ environment is recommended. be found on the product plate. 5. To reduce the risk of fire and electric shock, do not expose the product to rain or moisture. 3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time. 6. Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing. 4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution. 7. Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat). 5. Safety warning labels on the housing or bottom of the product or power adaptor. 8. Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product. 9. Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure shock. that may be of sufficient magnitude to constitute a risk of electric shock to persons. 10. Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended). 11. Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable is oriented to the right direction. part inside. Take the product to an authorized service center for repair. 12. Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake. 13. Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless This symbol indicates that the product is for indoor use only. the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately. This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement. 14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first. 15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning. The MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable. Excessively loud music may lead to hearing loss. Please keep the volume in a safe range. For wireless product: 1. Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or medical equipment. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household 2. Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplane, at gas stations, near wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, automatic gates, automatic fire alarm system or other automated devices. recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the 3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation return and collection systems or contact the retailer where the product was purchased. They can take this product for of the pacemaker or other medical devices. environmental safe recycling. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 1 2 English English Unpack the box Illustrations Box Contents 6 1 7 2 8 3 9 4 10 5 11 12 13 14 15 16 Remote control User manual Passive speaker (L) Active speaker (R) 1. Volume dial/Input selection (“Click-in” to switch 12. Power switch LINE→BAL→OPT→COAX→USB→ input) 13. Power cable connector 2. Treble control 14. Speaker pairing button 3. Bass control 15. Status indicator 3.5mm - RCA audio cable USB A-to-B data cable 4. Passive speaker pairing button. 16. Display window 5. Power switch a. Display the current audio source: LINE→BAL→ 6. Balanced input OPT→COAX→USB→ 7. Line in input b. Mode selection: 8. USB digital audio input (MONITOR) monitor mode is on: LED flashes once RCA - RCA audio cable Fiber optic audio cable 9. Optical input (DYNAMIC) dynamic mode is on: LED flashes twice 10. Coaxial input (CLASSIC) classic mode is on: LED flashes three times 11. Power cable connector (VOCAL) vocal mode is on: LED flashes four times Power cable x 2 3 4 English English Remote control Illustration Remote control Illustration Point the remote control to the remote receiving window on the speaker, the optimum operational distance is 7 meters. 1. As the illustration shows, press remote control battery cover downward with thumb and follow the arrow direction to remove 1. Power ON/OFF ③ cover, and place two AAA batteries (note the “+” and “-” pole) 2. Mute ① ② into the remote control. 3. Remote control indicator ④ 2. The battery life is normally about 6 months; please replace it USB ⑤ 4. USB input when the remote control is not sensitive or the control distance 5. Bluetooth input (press and hold to disconnect Bluetooth) to be shortened. ⑥ 6. Previous/next track (Bluetooth/USB audio sources only) ⑦ 3. Never use old and new batteries together. 7. Volume up/down ⑧ 8. Play/pause (Bluetooth/USB audio sources only) ⑨ OPT/COAX LINE/BAL ⑩ 9. Optical/coaxial input Note: 10. Line in/balanced input 1. Do not place the remote control in places that are hot and humid. 11 MONITOR 12 11. Monitor mode 2. Do not charge the batteries. 13 14 12. Dynamic mode 3. Remove the batteries when unused for a long period of time to 13. Classic mode avoid battery leakage. 14. Vocal mode 4. The battery should not be exposed to excessive heat such as direct sun, fire or similar. 5. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Four modes: CLASSIC mode: reproduces a classic HIFI sound. MONITOR mode: features a flat audio response curve, for sound with no coloration. DYNAMIC mode: more punch, more dynamics. VOCAL mode: human voice emphasized, singer’s position will seem closer to listener. Note: After being turned off/on or when audio source is changed, the speaker will return to CLASSIC mode by default, 5 please manually set to other modes via remote control. 6 English English Connection Connection The active speaker (R) and passive speaker (L) have been paired before leaving the factory. The wireless connection will resume automatically when both speakers are powered on and the red indicator on the passive speaker is lit. If the wireless connection fails to resume, please follow the steps below to re-pair. 1. Power on the active speaker, then press and hold the "Pair" button on the back panel of the active speaker (R), the current mode’s LED light in the display window will blink rapidly; 2. Press and hold the "Pair" button on the back panel of the passive speaker (L), the red indicator on the passive speaker (L) will blink rapidly. 3. Wait until the red indicator on the passive speaker (L) is lit constantly. Then the pairing is complete and wireless Blu-ray player, Game console, Set Top Box connection is made. Note: If the red indicator on the passive speaker (L) is in a breathing pattern, it indicates that there is no connection or the connection is unsuccessful, please repeat the above steps. Active speaker Passive speaker Pair Pair 1. As the illustration shows, connect to audio sources using the corresponding audio cable. 2. Connect speakers to power source using power cables and turn power switch on, the speakers should be ready to go, LED light on the active speaker will display current audio source. Please select the correct audio source with the corresponding connection. 7 8 English English Balanced Input Line In Input LINE/BAL LINE/BAL or or 1. Connect audio source (CD player, decoder, etc.) to balanced output port on the rear panel of the active speaker 1. Connect audio source (mobile phone, tablet, etc.) to Line in input port (note color matching) on the rear panel using XLR balanced audio cable (XLR cable not included). of the active speaker using 3.5mm-RCA audio cable or RCA-RCA audio cable. 2. Press the “LINE/BAL” button on the remote control, or press the “Volume dial/Input selection” dial on the rear 2. Press the “LINE/BAL” button on the remote control, or press the “Volume dial/Input selection” dial on the rear panel of the active speaker until LED indicator on the active speaker displays “BAL”. panel of the active speaker until display window on the active speaker displays “LINE”. 3. Play music on the connected device and adjust the settings to a desired level. 3. Play music on the connected device and adjust the settings to a desired level. 9 10 English English Optical/Coaxial Input USB Digital Audio Input USB OPT/COAX or or 1. Connect audio source (Blu-ray player, Set Top Box, etc.) to optical or coaxial input port on the rear panel of USB interface chip in the S3000 Pro is a XMOS chip used by high-end audio equipment. After being connected to PC, the active speaker using fiber optic audio cable or coaxial cable (coaxial cable not included). USB interface will directly extract and play back digital audio signal in a manner similar to the “USB external sound card”, 2. Press the “OPT/COAX” button on the remote control, or press the “Volume dial/Input selection” dial on the rear to avoid sound degradation and dynamic range compression caused by digital-to-analog conversion of PC sound card, panel of the active speaker until display window on the active speaker displays “OPT” or “COAX”. and to ensure the restoration of original sound quality. 3. Play music on the connected device and adjust the settings to a desired level. 1. Please refer to the details on page 11 to download and install the driver program. 2. Connect USB A type port on PC to USB B type input port on the rear panel of the active speaker using USB A-to-B data cable. 3. Press the “USB” button on the remote control, or press the “Volume dial/Input selection” dial on the rear panel of the active speaker until display window on the active speaker displays “USB”. 4. Play music on the connected device and adjust the settings to a desired level. Note: Only the standard PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) function in optical/coaxial mode. 11 12 English English USB Digital Audio Input Bluetooth Input Note: 1. Windows 7 / windows 10 operating systems only support USB Audio Class I audio transmission (only supports 2 channel audio signal, the highest sampling rate is 96KHz). The USB interface chip in the S3000 Pro uses USB EDIFIER S3000 Pro Audio Class 2 audio transmission to support the 192KHz audio signal. For Windows 7 / windows 10 operating system users, using the S3000 Pro speaker you will need to download the special driver. The address is http://www.edifier.com/cn/zh/speakers/S3000 Pro 2. Microsoft has stopped maintaining the XP system, we cannot provide a driver for this OS but it can be used normally. or There may be risk warning during installation, please install according to your needs. 3. USB driver in Apple Mac operating system supports USB Audio Class 1 and Class 2 audio transmission by default, therefore driver program installation is not needed. 4. For driver program introduction, please refer to the description on the download page, or click the following link to check: http://www.xmos.com/support/usb-audio-driver-support 1. Press the “ ” button on the remote control, or press the “Volume dial/Input selection” dial on the rear panel 5. If you need to buy USB A-to-B date cable, you can search for and buy it on various e-commerce platforms. of the active speaker until display window on the active speaker displays “ ”. 6. In USB mode, only PCM signal with 44.1KHz/48KHz/96KHz/192KHz can be decoded. 2. Set your Bluetooth device (mobile phone, tablet, etc.) to search for and connect to “EDIFIER S3000 Pro”. Note: Note: The play control under USB input belongs to USB HID control, this control needs support of player software, and so * The Bluetooth function of S3000 Pro can only be searched and connected in Bluetooth input. The current there may be compatibility differences for different audio player software. Bluetooth connection will be disconnected once the speaker switches to other audio inputs. When switched back to Bluetooth input, the speaker will try to connect to the device connected last time * Pin code for connection is “0000” if needed. * To disconnect Bluetooth, press and hold the “ ” button on the remote control for 2 seconds. * To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP and AVRCP profiles. * Bluetooth connectivity and compatibility may be different between different source devices, depending on the software versions of source devices. * The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless transmission sound quality, therefore please use the device supporting Qualcomm® aptX™ as the audio source. 13 14 English English Specification Troubleshooting Power output: R/L (treble): 8W+8W Problem Solution R/L (mid-range and bass): 120W+120W No sound • Check if the power indicator light is ON. Frequency response: 38Hz~40KHz • Try to turn up the volume using either the master volume control or remote control. Input: Line in / USB / Optical / Coaxial / Bluetooth / Balanced input • Ensure the audio cables are firmly connected and the input is set correctly on the speakers. Frequency Band: 2.402GHz ~ 2.480GHz; 5.736-5.814GHz • Check if there is a signal output from the audio source. RF Power output (EIRP): 1.88dBm for 2.4GHz band; 11.52dBm for 5.8GHz band Cannot connect via Bluetooth • Make sure the speaker is switched to Bluetooth input. If it is in other audio input modes, Bluetooth will not connect. Disconnect from any Bluetooth device by pressing and There is no restriction of use. holding in Bluetooth mode, then try again. • Effective Bluetooth transmission range is 10 meters; please ensure that operation is within the range. • Try another Bluetooth device for connection. The S3000 Pro does not turn on • Check if main power is connected, or if the wall outlet is switched on. To learn more about EDIFIER, please visit www.edifier.com For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the section titled Warranty Terms. USA and Canada: service@edifier.ca South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information. 15 16 English English Troubleshooting Troubleshooting If speaker is connected to PC by a USB audio cable: a. If the PC is using Windows operating system, please confirm that the special USB driver for S3000 Pro has been For Mac users, please open “System Preferences” → “Sound” → “Output” Tab to select “EDIFIER S3000 Pro”as the current audio output device. installed; if not please download and install the driver. b. For Windows users, please open “Device Manager” to check if there is USB device listed as “EDIFIER S3000 Pro” or “XMOS USB Audio”; if not, you may need to install the special USB driver program of S3000 Pro or re-start PC. For Mac users, please open “System Preferences” → “Sound” Tab, to check if there is audio output device enumerated as “EDIFIER S3000 Pro”. c. Please confirm whether the speaker is set as the audio output device. For Windows users, please open “Control Panel” → “Sound” → “Play” → “Set as Default” Tab to set “XMOS USB Audio” as the current audio output device. Sound Play Record Sound Communication Select the follow player to change setting Speaker 2-XMOS USB Audio Default device Configuration Set as Default Properties Confirm Cancel Apply 17 18 English English


Document Created: 2018-09-03 09:45:07
Document Modified: 2018-09-03 09:45:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC