User manual

FCC ID: Z9G-EDF56

Users Manual

Download: PDF
FCCID_3557053

Manual Edition 1.0, July 2017 IB-200-S0360D-00 S360DB Active Speaker Suit 2207, 22nd floor, Tower II,Lippo centre, 89 Queensway Hong Kong Tel: +852 2522 6989 Fax: +852 2522 1989 www.edifier.com © 2017 Edifier International Limited. All rights reserved. Printed in China NOTICE: For the need of technical improvement and system upgrade,information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications. Pictures and illustrations shown on this manual may User manual | Manuel d’utilisateur | Manual de usuario | Bedienungsanleitung | be slightly different from actual product. If any difference is found, the actual product prevails. Manuale dell’utente | Manual do utilizador Important safety instruction Important safety instruction 1. Please read the instructions carefully. Keep it in safe place for future reference. Power warning: 2. Use only accessories approved by the manufacturer. 1. Place the product near the power outlet. 3. Install the instrument properly by following the instructions in the device connection section. 2. Before use, make sure that the operating voltage is the same as your local power supply. Correct operating voltage can 4. Using the product in a 0-35℃ environment is recommended. be found on the product plate. 5. To reduce the risk of fire and electric shock, do not expose the product to rain or moisture. 3. For safety purpose, unplug the product during lightning storms or when unused for extended periods of time. 6. Do not use this product near water. Do not immerge the product into any liquid or have it exposed to dripping or splashing. 4. Under normal conditions, the power supply may get hot. Please keep good ventilation in the area and exercise caution. 7. Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that generate heat). 5. Safety warning labels on the housing or bottom of the product or power adaptor. 8. Do not place any object filled with liquids, such as vases on the product; neither should any open fire, such as lighted candles be placed on the product. 9. Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It may cause fire or electric This symbol is to alert the user to the presence of un-insulated dangerous voltage within the product's enclosure shock. that may be of sufficient magnitude to constitute a risk of electric shock to persons. 10. Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is recommended). 11. Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the plug matches the jack and This symbol is to warn the user not to disassemble the enclosure of the product and there is no user-replaceable is oriented to the right direction. part inside. Take the product to an authorized service center for repair. 12. Keep the provided accessories and parts (such as screws) away from children to prevent from being swallowed by mistake. 13. Do not open or remove the housing yourself. It may expose you to dangerous voltage or other hazardous risks. Regardless the cause of damage (such as damaged wire or plug, exposure to liquid splash or foreign object falling in, exposure to rain or This symbol indicates that the product is for indoor use only. moisture, product not working or being dropped, etc.), the repair has to be performed by an authorized service professional immediately. 14. Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug first. This symbol indicates that the product is a CLASS II or double insulated electrical device with no earth requirement. 15. Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface. Use only neutral solvent or clear water for cleaning. Products with grounding pin shall be connected to a power outlet with earth protection. For devices with detachable power cord, the product can be easily disconnected from the wire coupler. For devices without detachable power cord, unplug the Excessively loud music may lead to hearing loss. Please keep the volume in a safe range. product from wall socket to disconnect. For products equipped with all-pole mains switch, use the power switch as the disconnection device. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, For wireless product: recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the 1. Wireless product may generate shortwave radio frequencies and interfere with the normal use of other electronic devices or return and collection systems or contact the retailer where the product was purchased. They can take this product for medical equipment. environmental safe recycling. 2. Turn off the product when it’s disallowed. Do not use the product in medical facilities, on airplane, at gas stations, near automatic gates, automatic fire alarm system or other automated devices. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart 3. Do not use the product in the vicinity of a pacemaker within a 20cm range. The radio waves may affect the normal operation is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. of the pacemaker or other medical devices. 1 2 English English What’s in the box Illustrations Box Contents Subwoofer Active satellite speaker ③ Passive satellite speaker ④ ⑤ L ⑥ ⑦ ① ② ⑧ ⑨ 10 11 12 Remote control 14 15 16 17 Power cable 13 1. Satellite speaker power switch 10. Status indicator 3.5mm to RCA audio cable 2. Power cable 11. Pair with satellite speaker 3. Subwoofer pairing 12. Connect to active satellite speaker 4. PC/AUX input 13. LED display Speaker connecting cable 5. Optical input 14. Treble control 6. Coaxial input 15. Bass control 7. To passive satellite speaker 16. Volume adjustment/input selector 8. Power cable connector 17. Status indicator Fiber optic audio cable User manual 3 9. Subwoofer power switch 4 English English Remote control Connection 1. Power ON/OFF 2. Optical input Blu-ray player, game consoles, STB etc ① 3. Coaxial input 4. Bluetooth input ② ⑤ PC 5. PC input ③ ⑥ 6. AUX input AU 7. Previous track X ④ 8. Volume up 9. Volume down 10. Play/pause ⑦⑧ ⑨ 10 11 11. Next track L Battery installation and replacement Rotate the battery cover based on the arrow direction and remove, install the CR2025 battery into the battery compartment and close cover. WARNING! 1. Don’t swallow the battery; danger of chemical burn. 2. The product includes a wafer battery. Swallowing this battery may lead to injury or death. Do not place the new or old battery in where children can get to it. 3. Don’t use the product if the battery cover is missing or not closed, and keep the remote inaccessible to children. 4. Please go to the hospital immediately if the battery is swallowed. Note: 1. Do not place the remote control in places that are hot and humid. 2. Do not charge the batteries. 3. Remove the batteries when unused for a long period of time. 4. The battery should not be exposed to excessive heat such as direct sun, fire or similar. 5. Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 5 6 English English Audio source Input Bluetooth input Optical/Coaxial input EDIFIER S301 Volume / Input or Volume / Input or 1. Press the “OPT/COAX” button on the remote control or the volume adjustment/input switch knob on the active satellite speaker to select OPT/COAX input; indicator on the active satellite speaker is now lit. 2. Connect audio source (such as STB box and Blu-ray player etc) to OPT/COAX input on the active satellite speaker rear panel using fiber optic audio cable included or coaxial audio cable excluded. 3. Play music and adjust to desired volume. 1. Press the “ ” button on the remote control or the volume adjustment/input selector knob on the active Note: satellite speaker to select Bluetooth input; indicator on the active satellite speaker is now lit. Only the standard PCM audio signals (44.1KHz/48KHz/96KHz/192KHz) function in optical/coaxial mode. 2. Set your Bluetooth device (mobile phone, tablet etc.) to search for and select “EDIFIER S360DB”. Note: * The Bluetooth on S360DB can only be searched for and connected using Bluetooth input. The existing Bluetooth PC/AUX input connection will be disconnected once the speaker is switched into other audio inputs. When switched back to Bluetooth input, the speaker will try to connect to the last connected Bluetooth audio source device. PC AUX * Pin code for connection is “0000” if needed. * To disconnect Bluetooth, press and hold the “ ” button on the remote control. Volume / Input * To enjoy all Bluetooth functions please ensure your audio source device has A2DP and AVRCP profile. * Bluetooth connectivity and compatibility may be different among different source devices, depending on the or software versions of source devices. * The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless transmission sound quality, therefore please use the device supporting Qualcomm® aptX™ as the audio source. 1. Press the “PC/AUX” button on the remote control or the volume adjustment/input switch knob on the active satellite speaker to select PC/AUX input; indicator on the active satellite speaker is now lit. 2. Connect audio source (such as mobile phone, tablet, etc) to PC/AUX input on the active satellite speaker rear panel (note the color matching) using 3.5mm to RCA audio cable included. 3. Play music and adjust to desired volume. 7 8 English English Specification Troubleshooting Power output: R/L: (Treble): 12W+12W Problem Solution R/L: (Mid-range and bass): 32W+32W No sound • Check if the power indicator light is ON SW: (Subwoofer): 70W Frequency response: R/L: 60Hz-20KHz SW: 40Hz-150Hz • Try to turn up the volume using either the master volume control or remote control. Noise level: ≤25dB(A) Sensitivity: AUX input: R/L: 500±50mV SW: 220±20mV • Ensure the audio cables are firmly connected and the input is set correctly on the speakers. PC input: R/L: 700±50mV SW: 220±20mV OPT/COX input: R/L: 350±50mFFs SW: 180±20mFFs • Check if there is a signal output from the audio source. Bluetooth input: R/L: 450±50mFFs SW: 200±20mFFs Cannot connect via Bluetooth • Make sure the speaker is switched to Bluetooth input. If Tweeter unit: Planar diaphragm tweeter it is in other audio input modes, Bluetooth will not connect. Mid-range and bass unit: 4 inch (105mm) Disconnect from any Bluetooth device by pressing and Bass unit: 8 inch (220mm) holding the volume dial in Bluetooth mode, then try again. Input type: PC/AUX/Optical/Coaxial/Bluetooth • Effective Bluetooth transmission range is 10 meters; please ensure that operation is within the range. Frequency Band: 2.402GHz~2.480GHz RF Power output: ≤20 dBm (EIRP) • Try another Bluetooth device for connection. The S360DB does not turn on • Check if main power is connected, or if the wall outlet is There are no restrictions of use. switched on. 10mm 10mm To learn more about EDIFIER, please visit www.edifier.com Qualcomm is a trademark of Qualcomm Incorporated, registered For Edifier warranty queries, please visit the relevant country page on www.edifier.com and review the in the United States and other countries, used with permission. 10mm section titled Warranty Terms. aptX is a trademark of Qualcomm Technologies International, Ltd., USA and Canada: service@edifier.ca registered in the United States and other countries, used with South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local permission. 33.155mm contact information. 10mm 10mm aptX is a product of Qualcomm Technologies International, Ltd. 9 10 English English

FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Caution The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and your body. Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur l'exposition et la conformité de rf. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation estautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradioélectrique subi, mêmesi le brouillage est susceptible d'en compromettre le fonctionnement. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps. IB-200-000000-05 名 称： 说明书FCC认证说明 东莞市漫步者科技有限公司 材 质： 80g书纸 版面设计： 尺 寸： 125×120（MM） 校 对： 版本号及料号： V1.1/IB-200-000000-05 批 准：


Document Created: 2017-09-07 13:07:46
Document Modified: 2017-09-07 13:07:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC