RF Exposure

FCC ID: Z7RB23

RF Exposure Info

Download: PDF
FCCID_2915610

                            FCC ID : Z7RB23

  1. RF EXPOSURE

  1.1.The Requirement
            System operating under the provisions of this section shall be operated in a manner
            that ensures that the public is not exposed to radio frequency energy levels in excess
            of the Commission’s guidelines. See Section 15.247(b)(4) and Section 1.1307(b)(1)


  1.2.Limit For Maximum Permissible Exposure (MPE)


       Limits for General Population/ Uncontrolled Exposure
                                                            Power Density     Averaging Time
   Frequency         Electric Field     Magnetic Field
                                                                (S)                2        2
     Range           Strength (E)        Strength (H)                            E ,H           or S
                                                                         2
     (MHz)              (V/m)               (A/m)            ( mW/cm )
                                                                                   (minutes)
    0.3-1.34              614                1.63               (100)*               30
     1.34-30             824/f              2.19/f             (180/f)*                30
     30-300               27.5               0.073                0.2                  30
    300-1500                                                    f/1500                 30
  1500-100,000                                                    1.0                  30

F = frequency in MHz,     * Plane-wave equivalent power density



  1.3.MPE Calculation Method
         Predication of MPE limit at a given distance
         Equation from page 18 of OET Bulletin 65, Edition 97-01

         S=PG/4πR²

         Where: S=power density
                 P=power input to antenna
                G=power gain of the antenna in the direction of interest relative to an isotropic
                radiator
                 R=distance to the center of radiation of the antenna


         From the peak EUT RF output power, the minimum mobile separation distance,
         d=0.2m, as well as the gain of the antenna is 0 dBi, the RF power density can be
         obtained.



   1.4.TEST RESULTS
         Maximum measured transmitter power

         For BT 4.0 LE

         GFSK mode

   Test   Minimum                          Target                   Power    Power
                     Output       Output              Antenna
Frequency Separation                       power                   Density  Density   Test
                     Power        Power                Gain
           Distance                        (dBm)                    Limit   At 20 cm Results
(MHz)                (dBm)        (mW)               (Numeric)
            (cm)                                                  (mW/cm2) (mW/cm2)
  2402      20.00     -1.77       0.665     -1 ±1       1.000       1.000    0.0002   Pass
  2440      20.00     -1.40       0.724     -1 ±1       1.000       1.000    0.0002   Pass
  2480      20.00     -1.12       0.773     -1 ±1       1.000       1.000    0.0002   Pass

         For BT classic mode

         GFSK mode

   Test   Minimum                          Target                   Power    Power
                     Output       Output              Antenna
Frequency Separation                       power                   Density  Density   Test
                     Power        Power                Gain
           Distance                        (dBm)                    Limit   At 20 cm Results
(MHz)                (dBm)        (mW)               (Numeric)
            (cm)                                                  (mW/cm ) (mW/cm2)
                                                                          2

  2402      20.00     4.18        2.618     4 ±1        1.000       1.000    0.0006   Pass
  2441      20.00     4.10        2.570     4 ±1        1.000       1.000    0.0006   Pass
  2480      20.00     4.04        2.535     4 ±1        1.000       1.000    0.0006   Pass

         ∏/4-DQPSK Mode

   Test   Minimum                          Target                  Power    Power
                         Output   Output             Antenna
Frequency Separation                       power                  Density  Density   Test
                         Power    Power               Gain
           Distance                        (dBm)                   Limit   At 20 cm Results
(MHz)                    (dBm)    (mW)              (Numeric)
            (cm)                                                 (mW/cm2) (mW/cm2)
  2402      20.00         2.42     1.746    3±1       1.000        1.000    0.0005   Pass
  2441      20.00         3.07     2.028    3±1       1.000        1.000    0.0005   Pass
  2480      20.00         3.14     2.061    3±1       1.000        1.000    0.0005   Pass


         8DPSK Mode

   Test   Minimum                          Target                  Power    Power
                        Output    Output             Antenna
Frequency Separation                       power                  Density  Density   Test
                        Power     Power               Gain
           Distance                        (dBm)                   Limit   At 20 cm Results
(MHz)                   (dBm)     (mW)              (Numeric)
            (cm)                                                 (mW/cm ) (mW/cm2)
                                                                         2

  2402      20.00        2.62     1.828      3±1      1.000        1.000    0.0005   Pass
  2441      20.00        3.18     2.080      3±1      1.000        1.000    0.0005   Pass
  2480      20.00        3.25     2.113      3±1      1.000        1.000    0.0005   Pass

         The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the
         uncontrolled RF Exposure.



   1.5.FCC Radiation Exposure Statement
         This equipment complies with FCC radiation exposure limits set forth for an
         uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio
         frequency exposure limits, Human proximity to the antenna shall not be less than
         20cm(8 inches) during normal operation. Proposed RF exposure safety information to
         include in User’s Manual.



Document Created: 2016-02-25 18:05:58
Document Modified: 2016-02-25 18:05:58

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC