Antenna Port

FCC ID: Z64-WL18SBMOD

Operational Description

Download: PDF
FCCID_2588581

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Ultra Small Surface Mount Coaxial Connectors - 1.9mm or 2.4mm Mated Height U.FL Series Up to 6GHz Transmission Speed Mated height comparison (with E.FL series) E.FL-LP-040 U.FL-LP-040 E.FL-LP-066 U.FL-LP-066 U.FL-LP(V)-040 3(3.2Max) 2.4(2.5Max) 1.9(2.0Max) U.FL E.FL ■Features ●Space Factor of Mated Connector 1. Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm) 2. Small mounting area The receptacle occupies an area of 7.7mm2. Plug U.FL-LP-040 Cable 3. Light weight Dia.0.81 2.5Max Receptacle: 15.7mg 4. Accepts high frequency transmission. U.FL-R-SMT-1 To meet the frequency requirements of a wide variety of Receptacle miniature devices, the connectors offer high frequency performance from DC to 6GHz, with a V.S.W.R. of 1.3 to 1.5 Cable max. Plug U.FL-LP-066 5. Automatic board placement Dia.1.32 2.5Max Packaged on tape-and-reel the receptacles can be placed with Dia.1.13 vacuum nozzles of the automatic placement equipment. U.FL-R-SMT-1 6. Plugs are terminated with ultra-fine coaxial Receptacle (fluorinated resin insulated) cable Standard ultra-fine coaxial cable of 0.81mm diameter (single U.FL-LP(V)-040 Cable Plug braid shielding) is used for the plug termination, assuring secure and stable connections. 2.0Max Dia.0.81 7. Simple connector mating / unmating U.FL-R-SMT-1 Use of available extraction tool assures correct disconnection Receptacle of the plug and receptacle. 8. Verification of the fully mated condition U.FL-LP-062 Cable Plug Tactile click sensation confirms fully mated condition, assuring complete electrical and mechanical connection. Dia.1.00 2.4Max ■Applications U.FL-R-SMT-1 Receptacle Cellular phones, PHS, mobile phones, wireless communication devices, electronic measuring instruments, GPS, wireless LAN, Bluetooth and any application requiring high frequency Plug U.FL-LP-088 Cable transmission using small coaxial connectors. 2.4Max Dia.1.37 U.FL-R-SMT-1 Receptacle 2009.2w 1

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products U.FL have been discontinued, Series●Ultra Small or will be discontinued Surface Mount soon. Please Connectors Coaxial check the products status on the - 1.9mm or Hirose 2.4mm website MatedRoHS search Height at www.hirose-connectors.com, or contact your Hirose sales representative. ■Product Specifications Nominal characteristic impedance 50 ohms Operating temperature range -40˚C to +90˚C Storage temperature range -30˚C to +70˚C Ratings Frequency range DC to 6GHz Operating humidity 90%RH max. Storage humidity 90%RH max. Item Specification Conditions 1. Contact resistance Center : 20 m ohms max. 10 mA max. Outer : 10 m ohms max. 2. Insulation resistance 500 M ohms min. 100 V DC 3. Withstanding voltage No flashover or insulation breakdown. 200 V AC / 1 minute 4. V.S.W.R.* Part No. Up to 3GHz 3 to 6GHz U.FL-LP-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.35 Max U.FL-LP(V)-040 dia.0.81mm Coaxial Cable Assembly 1.3 Max 1.3 Max U.FL-LP-066 dia.1.13mm Coaxial Cable Assembly 1.3 Max 1.4 Max U.FL-LP-066 dia.1.32mm Coaxial Cable Assembly 1.3 Max 1.5 Max U.FL-LP-062 dia.1mm Coaxial Cable Assembly 1.3 Max 1.3 Max U.FL-LP-088 dia.1.37mm Coaxial Cable Assembly 1.3 Max 1.4 Max 5. Durability Contact resistance (mating / un-mating, Center : 25 m ohms max. 30 cycles with corresponding plug) Outer : 15 m ohms max. 6. Vibration Frequency: 10 to 100 Hz, single amplitude of 1.5mm, acceleration No electrical discontinuity of 1µs min. of 59m/s2, for 5 cycles in the direction of each of the 3 axis. 7. Shock No damage, cracks or parts dislocation. Acceleration of 735 m/s2, 11ms duration, sine half-wave waveform, 3 cycles in each of 3 axes. 8. Humidity No damage, cracks or parts dislocation. (Steady state) Insulation resistance 10 M ohms min.(humidity high) 96 hours at temperature of 40ç and humidity of 95%. Insulation resistance 500 M ohms min.(dry) 9. Temperature cycle No damage, cracks or parts dislocation. Temperature: -40˚C/+5 to +35˚C/+90˚C/+5 to +35˚C Contact resistance: 25 m ohms max. (Center) Time: 30min. / 3min. /30min./ 3min. 15 m ohms max. (Outer) 5 cycles 10. Salt spray No excessive corrosion 5% salt water solution, 48 hours *V.S.W.R. Measurement System The above V.S.W.R. standard values were measured using the measurement connection shown below. Note 1: Cable type connectors were measured with SMA conversion adapters attached to both ends of the harness product of a suitable 100cm cable. Note 2: Board type connectors were mounted to a 50Ω glass epoxy board and measurements were conducted with SMA conversion adapters attached. ■Material / Finishes Part Material Finish Remarks Shell Phosphor bronze Silver plated ————— Male center contact Brass Gold plated ————— Female center contact Phosphor bronze Gold plated ————— Plug PBT Color: Black UL94V-0 Insulator Receptacle LCP Color: Beige UL94V-0 2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkSeries●Ultra U.FL the products status on the Surface Small Hirose website RoHS search Mount at www.hirose-connectors.com, Coaxial Connectors - 1.9mm or contact your Hirose or 2.4mm sales Height Mated representative. ■Receptacles Note 1: Receptacles of (01) specification are sold by the bag with 100 pieces per bag. Please order in pack units. Note 2: Receptacles of (10) specification are sold by the reel (which contains 2,500 pieces). Please order in reel units. Note 3: Receptacles of (40) specification are sold by the reel (Which contains 4,000 pieces) Note 4: This area may be covered by insulating material. BRecommended PCB GND GND Mounting Pattern SIG No conductive traces in this area Ø2 4±0.05 1.25 1.9±0.05 1.2Max(Note 4) GND 0.35 2.2±0.05 3 2.6 1±0.05 0.6 GND SIG (3.1) 2.6 1.8 1.05±0.05 1±0.05 U.FL-R-SMT-1 Part No. CL No. Packaging Weight / EA RoHS U.FL-R-SMT-1(01) 331-0472-2-01 Bag packaging (100 pieces/bag) U.FL-R-SMT-1(10) 331-0472-2-10 Reel packaging (2,500 pieces/reel) 15.7/mg YES U.FL-R-SMT-1(40) 331-0472-2-40 Reel packaging (4,000 pieces/reel) ●Packaging Specifications Embossed Carrier Tape Dimensions Reel Dimensions 1.8 14 1.75±0.1 Ø1 2±0.1 4±0.1 Center contact 0.3 .5 + 0 0. 1 Ø13 5.5±0.1 Ø21 12±0.3 Ø330±2 8±0.1 Unreeling direction 1.6 3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products U.FL have been discontinued, Series●Ultra Small or will be discontinued Surface Mount soon. Please Connectors Coaxial check the products status on the - 1.9mm or Hirose 2.4mm website MatedRoHS search Height at www.hirose-connectors.com, or contact your Hirose sales representative. ■Cable Assembly (Plug) U.FL-LP-040 U.FL-LP-066 U.FL-LP(V)-040 U.FL-LP-062 U.FL-LP-088 2.8 2.8 3 3 3 Part No. 4 4 3.4 4 5 1.85 1.5 1.93 1.93 1.8 2.5mm Max. 2.5mm Max. 2.0mm Max. 2.4mm Max. 2.4mm Max. Mated Height (2.4mm Nom.) (2.4mm Nom.) (1.9mm Nom.) (2.3mm Nom.) (2.3mm Nom.) Dia. 1.13mm and Applicable Dia. 0.81mm Dia. 0.81mm Dia. 1mm Dia. 1.37mm Dia. 1.32mm cable Coaxial cable Coaxial cable Coaxial cable Coaxial cable Coaxial cable Weight (mg) 53.7 59.1 34.8 45.5 71.7 RoHS YES ●Cable Guide Cable Specification Cable Description Inner Dielectric Outer Jacket Nominal Nominal attenuation Type * * Conductor Diameter Conductor Diameter Impedance At 3GHz At 6GHz Dia.0.81mm 7/0.05 SA Dia.0.40 Single Dia.0.81 6.52dB/m 9.52dB/m 04 50 ohms Coaxial Cable (AWG36) PFA Shield TA[SA] PFA [6.45dB/m] [9.42dB/m] Dia.1.13mm 7/0.08 SA Dia.0.68 Single Dia.1.13 3.73dB/m 5.44dB/m 068 50 ohms Coaxial Cable (AWG32) FEP Shield TA[SA] FEP [3.43dB/m] [5.13dB/m] Dia.1.32mm 7/0.08 SA Dia.0.66 Double Dia.1.32 066 50 ohms 3.8dB/m 5.6dB/m Coaxial Cable (AWG32) FEP Shield TA FEP Dia.1mm 7/0.071 SA Dia.0.62 Tape, single Dia.1 062 50 ohms 3.1dB/m 4.4dB/m Coaxial Cable (AWG33) FEP Shield TAT FEP Dia.1.37mm 7/0.102 SA Dia.0.88 Single Dia.1.37 088 50 ohms 2.8dB/m 4.3dB/m Coaxial Cable (AWG30) FEP Shield TA FEP (data as provided by cable suppliers, for reference only) * SA : Silver plated annealed copper wire, TA : Tin plated annealed copper wire, TAT : Tin plated copper wire alloyed with tin 4

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkSeries●Ultra U.FL the products status on the Surface Small Hirose website RoHS search Mount at www.hirose-connectors.com, Coaxial Connectors - 1.9mm or contact your Hirose or 2.4mm sales Height Mated representative. ■How to Specify Plug Cable Assembly Double-Ended Cable Assembly Single-Ended Cable Assembly L L ●Ordering Information ●Standard Tolerances for (L) U.FL - [] LP - [] - A - (L) L L=35 to 200mm Standard Tolerance ±04mm 1 2 3 4 L=200 to 500mm ±08mm 1 Series name U.FL L=500 to 1000mm ±12mm 2 Assembly type LP: Single ended L=Longer than 1000mm ±1.5% of (L) 2LP: Double ended Note1: Minimum available length (L) is 35mm 04 : Dia.0.81mm Coaxial Cable Note2: Contact nearest HRS representative if different tolerances are 3 Cable type required. 068 : Dia.1.13mm Coaxial Cable 066 : Dia.1.32mm Coaxial Cable Note3: Contact Nearest HRS representative if one end requires 062 : Dia.1 mm Coaxial Cable preparation. 088 : Dia.1.37mm Coaxial Cable 4 Total length(mm) Length(L) Part No. of Plug Part No. of Cable Assembly Description RoHS U.FL-2LP-04N1T-A-(L) Dia. 0.81mm double ended coaxial cable, color: white U.FL-2LP-04N2T-A-(L) Dia. 0.81mm double ended coaxial cable, color: black U.FL-LP-040 U.FL-LP-04N1T-A-(L) Dia. 0.81mm single ended coaxial cable, color: white U.FL-LP-04N2T-A-(L) Dia. 0.81mm single ended coaxial cable, color: black U.FL-2LP-068N1T-A-(L) Dia. 1.13mm double ended coaxial cable, color: gray U.FL-2LP-068N2T-A-(L) Dia. 1.13mm double ended coaxial cable, color: black U.FL-LP-066 U.FL-LP-068N1T-A-(L) Dia. 1.13mm single ended coaxial cable, color: gray U.FL-LP-068N2T-A-(L) Dia. 1.13mm single ended coaxial cable, color: black U.FL-2LP-066N1-A-(L) Dia. 1.32mm double ended coaxial cable, color: gray U.FL-2LP-066N2-A-(L) Dia. 1.32mm double ended coaxial cable, color: black U.FL-LP-066 U.FL-LP-066N1-A-(L) Dia. 1.32mm single ended coaxial cable, color: gray U.FL-LP-066N2-A-(L) Dia. 1.32mm single ended coaxial cable, color: black YES U.FL-2LP(V)-04N1T-A-(L) Dia. 0.81mm double ended coaxial cable, color: white U.FL-2LP(V)-04N2T-A-(L) Dia. 0.81mm double ended coaxial cable, color: black U.FL-LP(V)-040 U.FL-LP(V)-04N1T-A-(L) Dia. 0.81mm single ended coaxial cable, color: white U.FL-LP(V)-04N2T-A-(L) Dia. 0.81mm single ended coaxial cable, color: black U.FL-2LP-062N1D-A-(L) Dia. 1mm double ended coaxial cable, color: gray U.FL-2LP-062N2D-A-(L) Dia. 1mm double ended coaxial cable, color: black U.FL-LP-062 U.FL-LP-062N1D-A-(L) Dia. 1mm single ended coaxial cable, color: gray U.FL-LP-062N2D-A-(L) Dia. 1mm single ended coaxial cable, color: black U.FL-2LP-088N1T-A-(L) Dia. 1.37mm double ended coaxial cable, color: gray U.FL-2LP-088N2T-A-(L) Dia. 1.37mm double ended coaxial cable, color: black U.FL-LP-088 U.FL-LP-088N1T-A-(L) Dia. 1.37mm single ended coaxial cable, color: gray U.FL-LP-088N2T-A-(L) Dia. 1.37mm single ended coaxial cable, color: black Please contact Hirose Sales Representative for cable length and cable end treatment. 5

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products U.FL have been discontinued, Series●Ultra Small or will be discontinued Surface Mount soon. Please Connectors Coaxial check the products status on the - 1.9mm or Hirose 2.4mm website MatedRoHS search Height at www.hirose-connectors.com, or contact your Hirose sales representative. ■Conversion Adapters ●SMA Conversion Adapter (Mating portion: U.FL side jack - SMA side plug) (10.7) 8HEX Note: The U.FL side mating portions has a lower lock retention Part No. CL No. RoHS force than the regular product, therefore, cannot be used HRMP-U.FLJ(40) 311-0300-2-40 YES for purposes other than performance measurements. ●SMA Conversion Adapter 14.05 (Mating portion: U.FL side plug - SMA side jack) 6 (4.05) 5.6 Ø6.35 1/4-36UNS-2A Part No. CL No. RoHS Note: The U.FL side mating portions has a lower lock retention force than the regular product, therefore, cannot be used HRMJ-U.FLP(40) 311-0301-5-40 YES for purposes other than performance measurements. (18.6) ●SMA Conversion Adapter 6 (4) 5.5 (Mating portion: U.FL side plug - SMA side jack) 1/4-36UNS-2A Part No. CL No. RoHS Note: This connector is used by compressing the mated HRMJ-U.FLP-ST1(40) 311-0385-5-40 YES portion of U.FL side onto the U.FL-R-SMT-1 portion. ■Receptacle to Inspection (7.9) 12.9 7HEX 5 (4.4) 1 M5∞0.5 This receptacle is used for inspecting the continuity, withstand voltage, and other aspects of the harness product. Part No. CL No. RoHS U.FL-R-1 331-0466-0 YES ■Plug Extraction Tool (90) This jig is used for extraction from a mating condition. 50 Ø15 5 U.FL 2.1 Note: Part No. U.FL-LP-N-2 for U.FL-LP-040/066/088. Part No. CL No. RoHS Part No. U.FL-LP(V)-N-2 for U.FL-LP(V)-040/U.FL-LP-062. U.FL-LP-N-2 331-0494-5 YES U.FL-LP(V)-N-2 331-0493-2 6

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please checkSeries●Ultra U.FL the products status on the Surface Small Hirose website RoHS search Mount at www.hirose-connectors.com, Coaxial Connectors - 1.9mm or contact your Hirose or 2.4mm sales Height Mated representative. ■Usage Precautions 1. Plugs 1) To disconnect connectors, insert the end portion of U.FL-LP-N-2 and U.FL-LP(V)-N-2 under the connector flanges and pull off vertically, in the direction of the connector mating axis. 2) To mate the connectors, the mating axes of both connectors must be Extraction Jig aligned and the connectors can be mated. The "click" will confirm fully (1) Mating / unmating mated connection.Do not attempt to insert on an extreme angle. U.FL Cable Assembly U.FL-R-SMT-1 After the connectors are mating, do not apply a load to the cable in excess of the values indicated in the diagram below. U.FL-LP 1N max (U.FL-LP(V)-040, U.FL-LP-062) Cable Assembly 2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) (2) Pull forces on the cable after connectors U.FL-R-SMT-1 are mated. 3N max (U.FL-LP(V)-040, U.FL-LP-062) 4N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) 1N max (U.FL-LP(V)-040, U.FL-LP-062) 2N max (U.FL-LP-040, U.FL-LP-066, U.FL-LP-088) (3) Precautions Do NOT forcefully twist or deform wires. 2. Receptacles 250 ç max. for [ç] 10 seconds q The temperature of the printed circuit board 260 surface temperature at the points of contact with 240 230ç 220 the terminals. Preheat 220ç 200 w Reflow soldering should be performed at a 180 (130 to 180ç) (1) Recommended reflow printed circuit surface temperature of 250°C max. 160 temperature profile 140 e In individual applications the actual temperature 120 may vary, depending on the solder paste type, 100 120 seconds max. 50 seconds max. 80 volume / thickness and board size / thickness. 60 seconds max. Consuly your solder paste and equipment manufacturer for specific recommendations. Time (2) Recommended Manual soldering: 350˚C for 5 seconds manual soldering (3) Recommended metal 0.1 to 0.12 mm mask thickness (4) Reflow cycles 2 times 3. Operating environment and storage conditions The connectors are not designed to operate in the following environments: • Exposed to a excessive amounts of fine particles and dust (1) Operating environment • Regions and places having a high density of sulfur dioxide, hydrogen sulfide, nitrogen dioxide or other corrosive gasses. • Environments having large rapid variations in temperature. Store in the Hirose Electric packaging. (2) Storage conditions - Temperature: -10 to +40ç, Humidity: 85% max. Receptacle Use within 6 months of delivery. Receptacles for which the storage period has elapsed must be tested for solderability to the PC board mounting surface. 7


Document Created: 2015-04-04 14:30:39
Document Modified: 2015-04-04 14:30:39
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC