Declaration Letter 5GHz

FCC ID: Z64-WL18DBMOD

Cover Letter(s)

Download: PDF
FCCID_2482723

   1J Texas
        INSTRUMENTS
 Texas Instruments Incorporated
 12500 T.1. BLVD
 Dallas, TX 75243

December 15, 2014

We have declared below featured for device identified as
FCC ID: Z64—WL18DBMOD
IC;: 4511—WL18DBMOD

(1) DFS Device ——          [Z] Master, [C] Client with Radar detection capability ,
                               Client without radar detection capability, [_] N/A

(2) Active / Passive Scanning , adhoc mode access point capability

       Frequency           Scanning        Ad Hoc Mode         Access point       WiFi Direct        WiFi Direct
      Band (MHz)             Plan            capability         capability       Group Owner        Group Client
      2412 — 2462           Active               Yes                Yes                 Yes              Yes
      5745 — 5825           Active               Yes                Yes                 Yes             Yes
      5180 — 5240           Passive              No                 No                  No              Yes
      5260 — 5320           Passive              No                 No                  No              Yes
      5500 — 5700           Passive              No                 No                  No              Yes

(3) Country code selection cability to end user— [_] Yes , [X) No
    If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection)

(4) Transmission in 5600 MHz to 5650 MHz is notched in Canada —            Yes , [_] No

(5) Meet Part 15.202 requirement —        Yes , J No ,
    * A master device is defined as a device operating in a mode in which it has the capability to transmit without
    receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling
    signals to other devices
    * A client device is defined as a device operating in a mode in which the transmissions of the device are under
    control of the master. A device in client mode is not able to initiate a network.

(6) For client devices that have software configuration control to operate in different modes (active scanning in some
    and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on
    non—DFS frequencies) or modular devices which configure the modes of operations through software, the
    application must provide software and operations description on how the software and / or hardwareis implemented
    to ensure that proper operations modes can not be modified by end user or an installer.
    [] Apply ,      No Apply , (If apply , pis help to provide explanation onit was implement, and how software was
    controlled)




                : Kelley J. Foltz
Texas Instruments, Inc.
EPD EVM Planning Manager
214—882—9119
FOLTZ@u



Document Created: 2019-09-20 04:59:25
Document Modified: 2019-09-20 04:59:25

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC