User Manual

FCC ID: Z64-WL1835MOD

Users Manual

Download: PDF
FCCID_2114451

EVALUATION BOARD/KIT/MODULE (EVM) WARNINGS, RESTRICTIONS AND DISCLAIMERS EVALUATION BOARD/KIT/MODULE (EVM) WARNINGS, RESTRICTIONS AND DISCLAIMERS TI Worldwide Technical Support For Feasibility Evaluation Only, in Laboratory/Development Environments. Unless otherwise indicated, this EVM is not a finished electrical Thank you For Feasibility equipment Evaluation and not intended Only, inuse. for consumer Laboratory/Development It is intended solely for use Environments. for preliminaryUnless otherwise feasibility indicated, evaluation this EVM is not a fin- in laboratory/development environ- INTERNET ments ished electricalqualified by technically equipment and notexperts electronics intendedwhofor areconsumer familiar withuse. theItdangers is intended solely for use and application risksforassociated preliminarywithfeasibility handlingevaluation in electrical mechani- TI Semiconductor Product Information Center Home Page laboratory/development environments by technically qualified electronics cal components, systems and subsystems. It should not be used as all or part of a finished end product.experts who are familiar with the dangers and application www.support.ti.com risks associated with handling electrical mechanical components, systems and subsystems. It should not be used as all or part of a finished Your Sole end product Responsibility and Risk. You acknowledge, represent and agree that: TI Semiconductor Knowledge Base Home Page 1. You have unique knowledge concerning Federal, State and local regulatory requirements (including but not limited to Food and Drug Administra- www.support.ti.com/sc/knowledgebase Your Sole Responsibility and Risk. You acknowledge, represent and agree that: tion regulations, if applicable) which relate to your products and which relate to your use (and/or that of your employees, affiliates, contractors or 1. You have unique knowledge concerning Federal, State and local regulatory requirements (including but not limited to Food and PRODUCT INFORMATION CENTERS designees)Drugof the EVM for evaluation, Administration testingif and regulations, other purposes. applicable) which relate to your products and which relate to your use (and/or that of your 2. You have full and exclusive employees, responsibility affiliates, contractorsto or assure the safety designees) andEVM of the compliance of yourtesting for evaluation, products andwith otherallpurposes. such laws and other applicable regulatory requirements, and full 2. You have alsoand to assure exclusivetheresponsibility safety of anytoactivities assure theto besafety conducted by you and/or and compliance yourproducts of your employees,withaffiliates, contractors all such laws or designees, and other ap- Americas Asia using the EVM. plicableFurther, you are regulatory responsibleand requirements, to assure also tothat any the assure interfaces safety of(electronic and/or any activities to mechanical) be conductedbetween the EVMyour by you and/or andemployees, any human body Phone +1 (972) 644-5580 Phone are designedaffiliates, contractors with suitable or designees, isolation and meansusing the EVM. to safely Further, youleakage limit accessible are responsible currents toto minimize assure that theany riskinterfaces of electrical(electronic and/or shock hazard. International +91-80-41381665 mechanical) Brazil Domestic Toll Free Number is not a between completedtheproduct, EVM and any not human meetbody are designed with suitable isolation and means to safely (suchlimit accessible for purchasing this Texas Instruments 3. Since the EVM it may all applicable regulatory and safety compliance standards as UL, CSA, VDE, CE, Phone 0800-891-2616 Australia 1-800-999-084 RoHS and leakage currents WEEE) which maytonormally minimizebethe risk of electrical associated shock with similar hazard. items. You assume full responsibility to determine and/or assure compliance with China 800-820-8682 any such standards and related certifications as may be applicable. You will employ reasonable safeguards to ensure that your use ofdeath, 3. You will employ reasonable safeguards to ensure that your use of the EVM will not result in any property damage, injury or the EVM will Mexico WiLink 8 Module ™ Wi-Fi®2.4-GHz CC3000Wi-Fi + even if the EVM should fail to perform as described or expected. Hong Kong 800-96-5941 ™ ® not result in any property damage, injury or death, even if the EVM should fail to perform as described or expected. 4. You will take care of proper disposal and recycling of the EVM’s electronic components and packing materials. 4. You will take care of proper disposal and recycling of the EVM’s electronic components and packing materials. Phone Fax Internet/Email 0800-670-7544 +1 (972) 927-6377 India Korea 1-800-425-7888 080-551-2804 SimpleLink Evaluation Certain Instructions. It is important to operate this EVM within TI’s recommended specifications and environmental considerations Certain Instructions. It is important to operate this EVM within TI’s recommended specifications and environmental considerations per the user per the user guidelines. Exceeding the specified EVM ratings (including but not limited to input and output voltage, current, power, and guidelines. Exceedingranges) environmental the specified EVM property may cause ratings (including damage, but not limited personal injury to or input death.and outputarevoltage, If there questions current, power, these concerning and environmental ratings pleaseranges) www.ti.com/ww/en/pic/PIC-Americas.htm Malaysia New Zealand 1-800-80-3973 0800-446-934 Bluetooth Module ® COM8 Kit for Sitara EVM ™ may cause contactproperty damage, a TI field personal prior representative injurytoorconnecting death. If there are questions interface electronics concerning including these ratingsand input power please contact intended a TI Any loads. field loads representative applied prior to connecting outside interface electronics of the specified including output range input power inandunintended may result intended loads. and/orAny loads applied inaccurate outside operation of the and/or specified possible output range permanent may toresult in damage Philippines 1-800-765-7404 Europe, Middle East, and Africa Singapore 800-886-1028 unintended and/or inaccurate operation and/or possible permanent damage to the EVM and/or the EVM and/or interface electronics. Please consult the EVM User’s Guide prior to connecting any load to the EVM output. If there is uncertainty interface as toPlease electronics. the load specification, consult the EVMpleaseUser’scontact a TI field Guide prior representative. to connecting During any load to normal the EVM operation, output. Ifsome therecircuit components is uncertainty may as to the load Phone European Free Call 00800-ASK TEXAS Taiwan Thailand 0800-006800 001-800-886-0010 To get started with this tool, visit www.ti.com/wl1835modcom8 have case specification, These temperatures please components contact a TIgreater include but than 60oC as long field representative. are not limited During to as the linear normalinputoperation, regulators, and output some switching are maintained transistors, at a normal circuit components pass mayambient transistors, 60°C as long as the input and output are maintained at a normal ambient operating temperature. These components include but are not limited to have case and operating temperature. temperatures current sense greater than resistors (00800 275 83927) Fax +886-2-2378-6808 To get started, and for questions, please visit: which can switching linear regulators, be identified using the transistors, EVM pass schematicand transistors, located current in sense the EVM User’swhich resistors Guide.can When placing measurement be identified using the EVMprobesschematicnearlocated these in the International +49 (0) 8161 80 2121 Email tiasia@ti.com devices EVM User’s during Guide. Whennormal placingoperation, please be measurement aware probes thatthese near thesedevices devicesduring may be very operation, normal warm to the tools, only qualified personnel knowledgeable in electronic measurement and diagnostics normally found in development environments touch. please beAs with that aware all electronic evaluation these devices may be very Russian Support +7 (4) 95 98 10 701 ti-china@ti.com WiLink resources warm toshould the touch. As with all electronic evaluation tools, only qualified personnel knowledgeable in electronic measurement and diagnostics normally use these EVMs found in development environments should use these EVMs. NOTE: The European Free Call (Toll Free) number is not active in all countries. If you have technical difficulty Internet www.ti.com/ww/en/pic/PIC-Asia.html www.ti.com/ww/en/pic/PIC-Asia.html •Wireless Connectivity Wiki: www.ti.com/cc3000wiki Learn more: Agreement to Defend, Indemnify and Hold Harmless. You agree to defend, indemnify and hold TI, its licensors and their represen- Japan Agreement tativesto less from of orand Defend,from harmless Indemnify against anywith in connection and against andany andany all claims, HoldandHarmless. damages, use of the all claims,You EVM that losses, agree tolosses, damages, is notexpenses, in accordance defend, costswith andthe indemnify expenses, liabilities andand costs holdliabilities terms of(collectively, TI, its licensors the agreement.“Claims”) and their (collectively, representatives “Claims”) arising outshall This obligation arising out harm- of orapply in connection wheth- with calling the free call number please use the international number above. Fax International +81-3-3344-5317 www.ti.com/wilink8 User guides, sample applications, software available any useerofClaims the EVMarisethat is not under lawinofaccordance with the tort or contract or anyterms otherof legal the agreement. theory, andThis contract or any other legal theory, and even if the EVM fails to perform as described or expected. evenobligation if the EVM shall failsapply whetherasClaims to perform describedariseorunder law of tort or expected. Fax +(49) (0) 8161 80 2045 Domestic Internet/Email 0120-81-0036 • E2E™ Forum: Safety-Critical or Life-Critical Applications. If you intend to evaluate the components for possible use in safety critical applications Safety-Critical (such as lifeor support) Life-CriticalwhereApplications. a failure of theIfTIyou intendwould product to evaluate the components reasonably be expectedfortopossible cause severeuse inpersonal safety critical injury applications or death, such (such as as life Internet www.ti.com/ww/eu/customer_support/index.htm International www.ti.com/ww/en/pic/PIC- Japan.html E2E Forum: www.ti.com/cc3000forum www.ti.com/wiconforum support) wherewhich devices a failure are ofclassified the TI product as FDAwould Class reasonably III or similarbeclassification, expected to then causeyou severe mustpersonal injury specifically or TI notify death, suchintent of such as devices which and enter intoare a clas- Domestic www.tij.co.jp/pic sified as FDA Class separate III or similar Assurance classification, and Indemnity then you must specifically notify TI of such intent and enter into a separate Assurance and Indemnity Agreement. •Engineer-to-engineer WiLink 8 Wiki: technical support Agreement. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 The platform bar, bar isE2E, Sitara andofWiLink a trademark Texas are trademarks Instruments. © of Texas 2012 Instruments. Texas © 2013 Instruments Texas Instruments Incorporated. 9 Printed Incorporated. on recycled paper SWRC281 SZZZ078 www.ti.com/wilink8wiki Copyright © 2013, Texas Instruments Incorporated Printed on recycled paper.

EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS REGULATORY COMPLIANCE INFORMATION (continued) REGULATORY REGULATORY COMPLIANCE COMPLIANCE INFORMATION INFORMATION (continued) (continued) EVALUATION BOARD/KIT/MODULE (EVM) ADDITIONAL TERMS REGULATORY COMPLIANCE INFORMATION (continued) Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) under FCC Interference Statement for Class A EVM devices Concernant les EVMs avec antennes détachables Texas Instruments (TI) provides the enclosed Evaluation Board/Kit/Module (EVM) the following under conditions: the following conditions: FCC Interference Statement for Class A EVM devices This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are Concernant les EVMs avec antennes détachables The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all claims arising This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Conformément Conformément à la réglementation à la réglementation d’Industrie d’Industrie Canada,Canada, le présent le présent émetteurémetteur radio radio peut peut fonctionner fonctionner avec une avec une antenne antenne d’un d’un type type et et d’un d’un gain maximal The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user indemnifies TI from all claims designed to provide reasonable designedprotection to provide against harmful interference againstwhen the interference equipment iswhen operated in a commercial environment. This equip- gain maximal (oupour inférieur) approuvé pour l’émetteur from the handling or use of the goods. These limits are reasonable protection harmful the equipment is operated in a commer- (ou inférieur) approuvé l’émetteur par Industrie Canada.par DansIndustrie Canada. le but de réduireDans le but de les risques de réduire les radioélectrique brouillage risques de brouillage radioélec- à l’intention des autres arising from the handling or use of the goods. ment generates, uses, and cial environment. Thiscan radiate radio equipment frequency generates, uses,energy and canand, if not radio radiate installed and used frequency in accordance energy with the instruction and, if not installed and used inmanual, may cause accordance trique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the board/kit may be returned within 30 days from the utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l’intensité harmfulwith interference to radio the instruction communications. manual, Operation may cause harmful of this equipment interference in a residential area to radio communications. is likely of Operation to this cause harmful interference equipment in which in a residential area case équivalente (p.i.r.e.) ned’une dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante. date ofShould deliverythis for evaluation board/kit a full refund. not meet the THE FOREGOING specifications LIMITED WARRANTY indicated IS THEinEXCLUSIVE the User’sWARRANTY Guide, the board/ MADE BY kit SELLER may be TOreturned BUYERwithin AND IS30IN LIEU nécessaire à l’établissement communication satisfaisante. the user is will likelybetorequired to correct cause harmful the interference interference at case in which his own the expense. user will be required to correct the interference at his own expense. OF ALLdays fromWARRANTIES, OTHER the date of delivery for a fullIMPLIED, EXPRESSED, refund. THE OR FOREGOING STATUTORY,LIMITED INCLUDINGWARRANTY ANY WARRANTYIS THE EXCLUSIVE WARRANTY MADE OF MERCHANTABILITY BY SELLER OR FITNESS FOR ANY Le présent émetteur Le présent radio a été émetteur approuvé radio par Industrie a été approuvé Canada pour par Industrie fonctionner Canada avec les types pour fonctionner avec d’antenne énumérés énumérés les types d’antenne dans le manuel dans d’usage le manuelet ayant TO BUYER PARTICULAR AND ISEXCEPT PURPOSE. IN LIEUTOOFTHE ALLEXTENT OTHEROFWARRANTIES, THE INDEMNITY EXPRESSED, SET FORTH IMPLIED, ABOVE,OR STATUTORY, NEITHER PARTY INCLUDING ANY WARRANTY SHALL BE LIABLE TO THE OTHEROF FOR FCC Interference FCC InterferenceStatement for Class Statement B EVMBdevices for Class EVM devices un gaind’usage et ayant admissible un gain maximal admissible maximal et l’impédance et l’impédance requise pour chaque typerequise pour chaque d’antenne. type Les types d’antenne. d’antenne nonLes types inclus d’antenne dans nonou cette liste, inclus dontdans le gain est MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. This equipment has been This equipment hastested been and testedfound andtofound comply with thewith to comply limitstheforlimits a Class for Ba digital Class Bdevice, digitalpursuant to part 15toofpart device, pursuant the 15 FCCofRules. the FCCThese limits are Rules. cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur. interdits pour l’exploitation de l’émetteur. NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the User’s Guide prior to handling the product. This notice These designed limits are to provide designedprotection reasonable to provideagainst reasonable harmful protection interferenceagainst in a harmful interference residential installation.in This a residential equipment installation. generates,Thisusesequipment and can radiate Please contains read the important User’s safety Guide and, information specifically, about temperaturesthe Warnings and Restrictions and voltages. For additionalnotice in the User’s information Guide on TI’s prior to handling environmental and/orthesafety product. programs, generates,energy radio frequency uses andand,can radiate if not radioand installed frequency energy and, with used in accordance if notthe installed and used instructions, mayincause accordance harmfulwith the instructions, interference to radio may cause communications. [Important Notice for Users of this Product [Important in Japan] Notice for Users of EVMs for RF Products in Japan] This notice contains important safety information about temperatures and voltages. For additional information on TI’s environmental harmful However, there interference is no guaranteeto radio thatcommunications. interference will notHowever, occur there is no guarantee in a particular that interference installation. will not If this equipment occur does in aharmful cause particular installation.to radio interference This development kit is NOT certified as Confirming to Technical Regulations of Radio Law of Japan! please visit www.ti.com/esh or contact TI. and/or safety programs, please contact the TI application engineer or visit www.ti.com/esh or contact TI. If this equipment does cause harmful interference to radio or television reception, which can be determined or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference byby turning the equipment If you use thiskit This development product is NOTin certified Japan, youasare required bytoRadio Confirming Law ofRegulations Technical Japan to follow of the instructions Radio below with respect to this product: Law of Japan No license is granted under any patent right or other intellectual property right of TI covering or relating to any machine, process, or combination in (1) Use this product in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal No license is granted under might any patent one or off moreandofon, thethe user is measures: following encouraged to try to correct the interference by one or more of the following measures: which such TI products or services be orright or other are used. intellectual TI currently property deals with a right of of variety TI customers covering orfor relating to any products, andmachine, thereforeprocess, or our arrangement • Reorient or relocate the receiving antenna. If you use this product in Japan, Affairs and you are required Communications by Radio on March Law ofbased 28, 2006, Japanonto Sub-section follow the instructions below 1.1 of Article 6 ofwith the respect to Rule Ministry’s this product: for Enforcement combination in which such TI products or services might be or are used. TI currently deals with a variety of customers for products, and of Radio with the user is our therefore not arrangement exclusive. TI assumes no liability with the user is not for applications exclusive. assistance, TI assumes customer no liability product design, for applications software assistance, performance, customer productordesign, infringement • Reorient•or Increase the receiving relocate the separationantenna. between the equipment and receiver. 1. Use this product in a Law of Japan, shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal Affairs and Com- of patents or services described herein. • Increase•theConnect the between separation equipment theinto an outletand equipment on areceiver. circuit different from that to which the receiver is connected. (2) Use this product only after you obtained the license of Test Radio Station as provided in Radio Law of Japan with respect to software performance, or infringement of patents or services described herein. munications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministry’s Rule for Enforcement of Radio Law of Japan, • Connect the equipment into an outletexperienced • Consult the dealer or an on a circuit radio/TV different technician from that toforwhich help. the receiver is connected. this product, or REGULATORY COMPLIANCE COMPLIANCE INFORMATION INFORMATION • Consult the dealer or an experienced radio/TV technician for help. 2. U se this(3)product Use of thisafter only product only afterthe you obtained youlicense obtained the Technical of Test Regulations Radio Station Conformity as provided in RadioCertification Law of Japan as with provided in Radio respect to thisLaw of or product, REGULATORY Japan with respect to this product. For EVMs annotated as IC – INDUSTRY CANADA Compliant As noted in the EVM User’s Guide and/or EVM itself, this EVM and/or accompanying hardware may or may not be subject to the Federal This annotated Class A or Basdigital 3. UseAlso, of thisplease product onlytransfer do not after youthisobtained product,the Technical unless Regulations you give the sameConformity Certification notice above as provided in Radio Law of Japan with respect to to the transferee. As noted in the EVM User’s Guide and/or EVM itself, this EVM and/or accompanying hardware may or may not be subject to the Federal For EVMs IC – apparatus INDUSTRYcomplies CANADA with Canadian ICES-003. Compliant this Please product. Also, Communications Commission (FCC) and Industry CanadaCanada (IC) rules. Changes This Class A or Bordigital modifications apparatusnot expressly complies withapproved CanadianbyICES-003. the party responsible for compliance could void the user’s authority to operate note thatplease if youdo not not could transfer followthis theproduct, unless instructions you give above, the same you will noticetoabove be subject to the penalties transferee. of Radio Law ofPlease Japan. note that if you could not Communications Commission (FCC) and Industry (IC) rules. follow the instructions above, you will be subject to penalties of Radio Law of Japan. the equipment. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For EVMs For not EVMs subject to the above not subject to therules, abovethisrules, evaluation board/kit/module this evaluation is intendedis for board/kit/module use for for intended ENGINEERING DEVELOPMENT, use for ENGINEERING DEMONSTRATION DEVELOPMENT, Texas Instruments Japan Limited OR EVALUATION PURPOSES Texas Instruments Japan Limited DEMONSTRATION OR ONLY and is not EVALUATION considered PURPOSES by TIand ONLY to is benot a finished end by considered product fit for TI to be generalend a finished consumer productuse. It generates, fit for uses, and can general consumer Concerning Concerning EVMs EVMs including including radio transmitters radio transmitters (address) 24-1, Nishi-Shinjuku 6 chome, Shinjukku-ku, Tokyo, Japan radiateuse. radioIt frequency generates,energy and can has radiate not beenradio tested for compliance with has the limits of computing This device complies with Industry (address) 24-1, Nishi-Shinjuku 6 chome, Shinjuku-ku, Tokyo, Japan uses, and frequency energy and not been tested for compliance with the limits of computing This device complies with Industry CanadaCanada licence-exempt licence-exempt RSS standard(s). RSS standard(s). Operation Operation is subject is subject to thetofollowing the following two conditions: two conditions: (1)device (1) this this may device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired http://www.tij.co.jp devicesdevices pursuant pursuant to partto15part 15 oforFCC of FCC or ICES-003 ICES-003 rules, which rules, which are designed are designed to provide to provide reasonable reasonable protection protection againstagainst radio frequency radio frequency interference. not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. interference. Operationmay of the equipment may cause interference with radioincommunications, operation of the device. Operation of the equipment cause interference with radio communications, which case the in which user case at his theexpense own user at his will own expenseto take be required will be required to take whatever measures may be required to correct this interference. Concerning EVMs including detachable antennas 【ご使用にあたっての注意】 whatever measures may be required to correct this interference. Concerning Under Industry EVMs Canada includingthis regulations, detachable antennas radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for 本開発キットは技術基準適合証明を受けておりません。 GeneralGeneral Statement Statement for EVMsfor EVMs includingincluding a radioa radio Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the 本製品のご使用に際しては、電波法遵守のため、以下のいずれかの措置を取っていただく必要がありますのでご注 User Power/Frequency Use Obligations: This radio is intended for development/professional use only in legally allocated frequency and approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should equivalent 意ください。 User Power/Frequency Use Obligations: This power limits. Any use of radio frequencies radio and/or is intended powerforavailability development/professional of this EVM and use only in legallyapplication(s) its development allocated frequency and power must comply with limits. be soisotropically chosen thatradiated power (e.i.r.p.) the equivalent is not isotropically more than radiated powerthat necessary (e.i.r.p.) is notfor successful more than thatcommunication. necessary for successful communication. （１）電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波 Any use of radio local laws frequencies governing radioand/or power availability spectrum of this allocation and EVMlimits power and its for development this evaluation application(s) module. It ismustthe comply withresponsibility user’s sole local laws governing to only radio This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the user guide with the maximum permis- This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the user guide with the 暗室等の試験設備でご使用いただく。 spectrum allocation operate and inpower this radio legallylimits for this frequency acceptable evaluationspace module. andItwithin is thelegally user’smandated sole responsibility to only operate power limitations. this radiotointhis Any exceptions legally acceptable is strictly sible gain and required maximum antenna permissible gainimpedance for each and required antenna antenna type indicated. impedance for each Antenna antenna types not included type indicated. in thistypes Antenna list, having a gainingreater not included than the this list, （２）実験局の免許を取得後ご使用いただく。 prohibited frequency unauthorized space and within by Texas Instruments legally mandated unless Any power limitations. userexceptions has obtained appropriate to this experimental/development are strictly prohibited and unauthorized licenses from Instruments by Texas local maximum gaina indicated having for that gain greater than type, are strictlygain the maximum prohibited forfor indicated usethat withtype, thisare device. strictly prohibited for use with this device. （３）技術基準適合証明を取得後ご使用いただく。 unless regulatory authorities, user has obtained which is responsibility appropriate of user including experimental/development its acceptable licenses from localauthorization. regulatory authorities, which is responsibility of user including なお、本製品は、上記の 「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できな its acceptable authorization. Cet appareil numérique Cet appareil de la classe numérique A ou BAest de la classe ouconforme à la norme B est conforme NMB-003 à la norme du Canada. NMB-003 du Canada. For EVMs annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant いものとします。 Les changements Les changementsou les modifications pas expressément ou les modifications approuvés pas expressément par la partie approuvés par laresponsable de la conformité partie responsable ont pu vider de la conformité l’autorité ont pu de l’utilisateur vider l’autorité For EVMs annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant Caution pour actionner l’équipement. de l’utilisateur pour actionner l’équipement. 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 CautionThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 日本テキサス・インスツルメンツ株式会社 harmful interference, and15(2)ofthis Concernant les EVMs avec appareils radio radio This device complies with part the device mustOperation FCC Rules. accept any interference is subject to thereceived, followingincluding interference two conditions: thatdevice (1) This may maycausenotundesired cause harmful Concernant les EVMs avec appareils 東京都新宿区西新宿６丁目２４番１号 operation. Le présent appareilappareil est conforme aux CNR auxd’Industrie CanadaCanada applicables aux appareils radio exempts de licence. L’exploitation est autorisée est aux interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent est conforme CNR d’Industrie applicables aux appareils radio exempts de licence. L’exploitation 西新宿三井ビル deux conditions autorisée suivantes aux deux :conditions (1) l’appareil ne doit :pas suivantes (1) produire l’appareildenebrouillage, et (2) l’utilisateur doit pas produire de l’appareil de brouillage, doit accepter et (2) l’utilisateur tout brouillage de l’appareil radioélectrique doit accepter ChangesChanges or modifications or modifications not expressly not expressly approved approved by the by the party party responsible responsible for compliance for compliance could voidcould void the the user’s user’s to authority authority operatetotheoperate equipment. the equipment. subi, même si le brouillage tout brouillage est susceptible radioélectrique d’en compromettre subi, même si le brouillageleest fonctionnement. susceptible d’en compromettre le fonctionnement http://www.tij.co.jp


Document Created: 2019-09-29 12:15:26
Document Modified: 2019-09-29 12:15:26
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC