Test Report RF Exposure Appendix C

FCC ID: Z64-CC3200STK

RF Exposure Info

Download: PDF
FCCID_3300800

A" Collaborau in an with \\‘\"l“l" s am77J Ein p_e a_ q :\M\// % ; V CALIBRATION LABORATORY & Efifi‘* . ——nS Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China {,//R& v CALIBRATION Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 .,/,,lu\“\‘ CNAS LO570 E—mail: cttl@chinattl.com Hittp://www.chinattl.cn Client Sporton_TW Certificate No: 216—97130 CALIBRATION CERTIFICATE Object D2450V2 — SN: 736 Calibration Procedure(s) FD—211—2—003—01 Calibration Procedures for dipole validation kits Calibration date: August 30, 2016 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22#3)C and humidity<70%. Calibration Equipment used (V&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Power sensor NRP—Z91 101547 01—Jul—15 (CTTL, No.J15X04256) Jun—16 Reference Probe EX3DV4 SN 3801 29—Jun—16(SPEAG,No.EX3—3801_Jun16) Jun—17 DAE4 SN 777 22—Aug—16(CTTL—SPEAG,No.Z16—97138) Aug—17 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Signal Generator E4438C MY49071430 O1—Feb—16 (CTTL, No.J16X00893) Jan—17 Network Analyzer E5071C MY46110673 26—Jan—16 (CTTL, No.J16X00894) Jan—17 Name Function Signature Calibrated by: Y : Zhao Jing 6 SAR Test Engineer Zz Reviewed by: Qi Dianyuan SAR Project Leader Approved by: Lu Bingsong Deputy Director of the laboratoiry /qu{z Issued: SeptembBer 1, 2016 This calibration cartificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z16—97130 Page 1 of 8

,!1!11!!11.1111... zu......._.... -< In Collaboration with - TTL s p e a g CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86-1 0-62304633-2079 Fax: +86- 10-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.cn Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORMx, y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards : a) IEEE Std 1528-201 3, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 201 3 b) IEC 62209-1, "Procedure to measure the Specific Absorption Rate (SAR) For hand-held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: • Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. • Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. • Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. • Electrical Delay: One-way delay between the SMA connector and the antenna feed point. No uncertainty required. • SAR measured: SAR measured at the stated antenna input power. • SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. • SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z16-97130 Page 2 of8

In Collaboration with s p e a g CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191 , China Tel: +86-10-62304633-2079 Fax: +86-10-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.cn Measurement Conditions DASY system confi1aurat1on, as f ar as not a1ven on oaae 1 DASY Version DASY52 52.8.8.1258 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1 C Distance Dipole Center - TSL 10mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 2450 MHz ± 1 MHz Head TSL parameters r . parameters and caIcu Ia ions were aoor1ed . The fo IIowing Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 ± 0.2) °C 39.5 ±6 % 1.81 mho/m ± 6 % Head TSL temperature change during test <1.0 °C ---- ---- SAR result with Head TSL 3 Condition SAR averaged over 1 cm (1 g) of Head TSL SAR measured 250 mW input power 13.3 mW/ g SAR for nominal Head TSL parameters normalized to 1W 53.1 mW lg ± 20.8 % (k=2) SAR averaged over 10 cm 3 (10 g) of Head TSL Condition SAR measured 250 mW input power 6.24 mW/ g SAR for nominal Head TSL parameters normalized to 1W 25.0 mW lg ± 20.4 % (k=2) Body TSL parameters r r d. . oarameters and caIcu Ia ions were aoo11e The fo II owma Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 ± 0..2) °C 52.0 ±6 % 1.93 mho/m ±6 % Body TSL temperature change during test <1.0 °C ---- --- SAR resu It WI"th BOdIV TSL 3 Condition SAR averaged over 1 cm (1 g) of Body TSL SAR measured 250 mW input power 13.0mW/g SAR for nominal Body TSL parameters normalized to 1W 52.1 mW lg ± 20.8 % (k=2) SAR averaged over 10 cm 3 (10 g) of Body TSL Condition SAR measured 250 mW input power 6.10 mW/ g SAR for nominal Body TSL parameters normalized to 1W 24.4 mW lg ± 20.4 % (k=2) Certificate No: 216-97130 Page 3 of8

-~ ' K TTL s In Collaboration with p e a g CALIBRATION LABORATORY Add: No.SJ Xucyuan Road, llaidian District, Beijing, 100191 , China Tel: +86-I0-62304633-2079 Fax: +86-10-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.cn Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 52.50+ 4.99j0 Return Loss - 25.3dB Antenna Parameters with Body TSL Impedance, transformed to feed point 48.00+ 4.65j0 Return Loss - 25.7dB General Antenna Parameters and Design Electrical Delay (one direction) 1.053 ns After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard . No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data I Manufactured by SPEAG Certificate No: 216-97130 Page 4 of8

;Aq In Collaboration with ©=‘/‘"/‘J, s p e a g y CALIBRATION LABORATORY Add: No.31 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com Http:/www.chinattl.en DASY5 Validation Report for Head TSL Date: 08.30.2016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 736 Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used: f = 2450 MHz; 0 = 1.812 S/m; sr = 39.54; p = 1000 kg/m3 Phantom section: Right Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN3801; ConvF(6.67, 6.67, 6.67); Calibrated: 6/29/2016; e Sensor—Surface: 2mm (Mechanical Surface Detection) e Electronics: DAE4 Sn777; Calibrated: 8/22/2016 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=>mm, dz=5mm Reference Value = 103.9 V/m; Power Drift = —0.03 dB Peak SAR (extrapolated) = 26.9 W/kg SAR(I g)= 13.3 W/kg; SAR(10 g) = 6.24 W/kg Maximum value of SAR (measured) = 20.2 W/kg dB H 0 [— | —4.23 |_| —8.46 ~12.69 —16.92 k« —21.15 0 dB = 20.2 W/kg = 13.05 dBW/kg Certificate No: Z16—97130 Page 5 of 8

In Collaboration with iiiiiiiTTL s p e a g CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86-10-62304633-2079 Fax: +86-10-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.cn Impedance Measurement Plot for Head TSL Tr1 511 Log Ma g 10. 00dB/ Ref O.OOOdB [F1] 5 0 . 00 >1 2 . 4500000 GHZ -25 . 272 B 40 . 00 30 . 00 20 . 00 10. 00 0 . 000 -10 . 0 0 -20 . 00 -30.00 -40. 00 -50 . 00 ~iii!! 511 smith (R+jx) scale 1. ooou [F1 Del] >1 2.4500000 GHZ 52 . 519 Q 4 . 9945 Q 324 . 4 1 11 Start 2.25 GHz IFBW 100 Hz Stop 2.65 §:jz_JBIT Certificate No: Z16-97130 Page 6 of8

....- - TTL s p e a g ....... " In Collaboration with CALIBRATION LABORATORY Add: No.SI Xucyuan Road, Haidian District, Beijing, 100191, China Tel: +86-10-62304633-2079 Fax: +86-1 0-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinattl.cn DASY5 Validation Report for Body TSL Date: 08.30.2016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 736 Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1: 1 Medium parameters used: f = 2450 MHz; a= 1.933 S/m; er= 51.96; p = 1000 kg/m3 Phantom section: Center Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007) DASY5 Configuration: • Probe: EX3DV4 - SN3801; ConvF(6.88, 6.88, 6.88); Calibrated: 6/29/2016; • Sensor-Surface: 2mm (Mechanical Surface Detection) • Electronics: DAE4 Sn777; Calibrated: 8/22/2016 • Phantom: Triple Flat Phantom 5. l C; Type: QD 000 P51 CA; Serial: 1161/1 • Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm,dz=5mm Reference Value= 95.98 V/m; Power Drift= 0.04 dB Peak SAR (extrapolated) = 26.1 W/kg SAR(l g) = 13 W/kg; SAR(lO g) = 6.1 W/kg Maximum value of SAR (measured) = 19.6 W/kg dB 0 -4.26 -8.52 -12.79 -17.05 -21.31 0 dB = 19.6 W/kg = 12.92 dBW/kg Certificate No: 216-97130 Page 7 of 8

' i< - 111TTL In Collaboration with s p e a g -#' CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86-10-62304633-2079 Fax: +86-10-62304633-2504 E-mail: cttl@chinattl.com Http://www.chinaltl.cn Impedance Measurement Plot for Body TSL Tr l Sll Log Mag 10. oode/ Ref o.ooode [F1] 5o. OO >l 2.4500000 GHZ -25 . 724 dB 40. 00 30 . 00 20 . 00 10. 00 0. 000 - 1 0. 00 - 20 . 00 -30 . 00 -4 0 . 0 0 - 50. 00 ~ill!ISll smith (R+jx) scale 1 . ooou [Fl Del] >l 2.4500000 GHZ 4 7.967 0 4.6491 0 302 . 0 1 11 start 2.25 GHz JFBW 100 Hz St op 2.65 GHz Jilfi" Certificate No: Z l 6-97 130 Page 8 of8

Calibration Laboratory of Schmid & Partner s C Schweizerisc her Kalibrierdiens t Service suisse d'etalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Sporton -TW (Auden) Certificate No: DAE4-n8_ May1 6 CALIBRATION CERTIFICATE Object DAE4- SD 000 D04 BM - SN: 778 Calibration procedure(s) QA CAL-06.v2 9 Calibration procedure for the data acquisition electronics (DAE) Calibration date: May 12, 2016 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards Cal Date (Certificate No.) Scheduled Calibration Keithley Multimeter Type 2001 J SN: 0810278 09-Sep-15 (No:17153) Sep-16 Secondary Standards ID# Check Date (in house) Scheduled Check Auto DAE Calibration Unit SE UWS 053 AA 1001 05-Jan-16 (in house check) In house check: Jan-17 Calibrator Box V2.1 SE UMS 006 AA 1002 05-Jan-16 (in house check) In house check: Jan-1 7 Name Function Signature Calibrated by: Dominique Steffen Technician Approved by: Fin Bomholt Deputy Technical Manager Issued: May 12, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: DAE4-778_M ay16 Page 1 of 5

Calibration Laboratory of Schmid & Partner S Schweizerisc her Kalibrierdiens t Service sulsse d'etalonnage Engineering AG C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland s Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary DAE data acquisition electronics Connecto r angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters • DC Voltage Measurement: Calibration Factor assessed for use in DASY system by compariso n with a calibrated instrumen t traceable to national standards. The figure given correspon ds to the full scale range of the voltmeter in the respective range. • Connecto r angle: The angle of the connector is assessed measuring the angle mechanic ally by a tool inserted. Uncertain ty is not required. • The following paramete rs as document ed in the Appendix contain technical informatio n as a result from the performan ce test and require no uncertainty. • DC Voltage Measurem ent Linearity: Verification of the Linearity at +10% and -10% of the nominal calibration voltage. Influence of offset voltage is included in this measurem ent. • Common mode sensitivity: Influence of a positive or negative common mode voltage on the differential measurement. • Channel separation: Influence of a voltage on the neighbor channels not subject to an input voltage. • AD Converter Values with inputs shorted: Values on the internal AD converter corresponding to zero input voltage • Input Offset Measurem ent Output voltage and statistical results over a large number of zero voltage measurem ents. • Input Offset Current: Typical value for information; Maximum channel input offset current, not considering the input resistance . • Input resistance: Typical value for information: DAE input resistance at the connector, during internal auto-zeroing and during measurem ent. • Low Battery Alarm Voltage: Typical value for information. Below this voltage, a battery alarm signal is generated. • Power consumption: Typical value for information. Supply currents in various operating modes. Certificate No: DAE4-778_M ay16 Page 2 of 5

DC Voltage Measurement AID - Converter Resolution nominal High Range: 1LS8 = 6.1µV, full range= -100 ... +300 mV Low Range: 1LSB = 61 nV , full range= -1.. .. ... +3mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors X y z High Range 404.712 ± 0.02% (k=2) 403.516 ± 0.02% (k=2) 405.068 ± 0.02% (k=2) Low Range 3.98678 ± 1.50% (k=2) 3.96495 ± 1.50% (k=2) 4.00091 ± 1.50% (k=2) Connector Angle Connector Angle to be used in DASY system 270.0 ° ± 1 ° Certificate No: DAE4-778_May16 Page 3 of 5

Appendix (Additional assessments outside the scope of SCS0108) 1. DC Vo Itage L"mearuy High Range Reading (µV) Difference (µV) Error(%) ChannelX + Input 200032.14 ·1.38 -0.00 ChannelX + Input 20005.68 0.79 0.00 ChannelX - Input -20003.61 1.31 -0.01 ChannelY + Input 200030.28 -3.73 -0.00 Channel¥ + Input 20006.01 1.25 0.01 ChannelY - Input -20003.00 1.89 -0.01 ChannelZ + Input 200035.46 1.52 0.00 Channel Z + Input 20002.36 -2.31 -0.01 Channel Z - Input -20008.31 -3.27 0.02 Low Range Reading (µV) Difference (µV) Error (%) ChannelX + Input 2001.27 0.01 0.00 ChannelX + Input 201.37 0.21 0.10 ChannelX - Input -198.61 -0.02 0.01 ChannelY + Input 2001.38 0.24 0.01 Channel¥ + Input 200.13 -0.97 -0.48 ChannelY - Input -198.84 -0.10 0.05 ChannelZ + Input 2001.29 0.21 0.01 ChannelZ + Input 200.34 -0.69 -0.34 ChannelZ - Input -200.58 -1.74 0.88 2. Common mode sensitivity t Z ero T1me: 3 sec; Measunng f1me: 3 sec DASY measurement paramet ers: A uo Common mode High Range Low Range Input Voltage (mV) Average Reading {µV) Average Reading {µV) Channel X 200 -4.35 -5.61 - 200 7.07 5.78 ChannelY 200 -1.79 -1.82 - 200 0.49 0.20 Channel Z 200 -12.55 -12.56 -200 10.17 10.19 3. Channel separation DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input Voltage {mV) Channel X (µV) Channel Y {µV) Channel Z {µV) ChannelX 200 - -0.66 -2.54 ChannelY 200 8.70 - -0.26 ChannelZ 200 3.71 7.16 - Certificate No: DAE4-778_May16 Page 4 of 5

4. AD-Converter Values with inputs shorted DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec High Range (LSB) Low Range (LSB) ChannelX 16054 16869 ChannelY 16191 17846 ChannelZ 16441 16314 5. Input Offset Measurement DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Input 10MQ Average (µV) min. Offset (µV) Std. Deviation max. Offset (µ V) (µV) ChannelX 0.48 ·0.60 1.44 0.42 ChannelY -0.09 -1.42 2.50 0.58 ChannelZ -1.11 -2.45 -0.19 0.45 6. Input Offset Current Nominal Input circuitry offset current on all channels: <25fA 7. Inpu t Res1s . t ance (Typical values for information) Zeroing (kOhm) Measuring (MOhm) ChannelX 200 200 ChannelY 200 200 ChannelZ 200 200 8. Low Battery Al arm V0 Itage (Typical values or information Typical values Alarm Level (VDC) Supply(+ Vee) +7.9 Supply (- Vee) -7.6 9. power Consumpf10n (Typical values for information) Typical values Switched off (mA) Stand by (mA) Transmitting (mA) Supply(+ Vee) +0.01 +6 +14 Supply (- Vee) - O.Q1 -8 -9 Certificate No: DAE4-778_May16 Page 5 of 5

a= 77J, a F r CNAS## in Collaboration with ‘:“:Q‘\‘S"Z;- A ;:%j CALIBRATION LABORATORY —.,//_\ \\-‘ v CALIBRATION Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China "’c:l,’.E\-N“ CNAS LO570 Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hitp://www.chinattl.on Client Sporton_TW Certificate No: 216—97123 CALIBRATION CERTIFICATE Object ES3DV3 — SN:3270 Calibration Procedure(s) FD—211—2—004—01 Calibration Procedures for Dosimetric E—field Probes Calibration date: August 26, 2016 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)¢ and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Power sensor NRP—Z91 101547 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Power sensor NRP—Z91 101548 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Reference10dBAttenuator 18NSOW—1008B 13—Mar—16(CTTL,No.J16X01547) Mar—18 Reference20dBAttenuator 18NSOW—204B 13—Mar—16(CTTL, No.J16X01548) Mar—18 Reference Probe EX3DV4 SN 7307 19—Feb—16(SPEAG,No.EX3—7307_Feb16) Feb—17 DAE4 SN 1331 21—Jan—16(SPEAG, No.DAE4—1331_Jan16) Jan —~17 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration SignalGeneratorMG3700A 6201052605 27—Jun—16 (CTTL, No.J16X04776) Jun—17 Network Analyzer E5071C MY46110673 26—Jan—16 (CTTL, No.J16X00894) Jan —17 Name Function Signatur Calibrated by: Yu Zongying SAR Test Engineer % Reviewed by: Qi Dianyuan SAR Project Leader %/ Approved by: Lu Bingsong Deputy Director of the laboratory M@& Issued: August 27, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z16—97123 Page 1 of 11

' in Callaboration with a=7/"["J, a p, CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hitp://wwwychinatil.en Glossary: TSL tissue simulating liquid NORMx,y,z sensitivity in free space ConvF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A,B,C,D modulation dependent linearization parameters Polarization ® ® rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), i 8=0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: e NORMx,y,z: Assessed for E—field polarization 0=0 (f2900MHz in TEM—cell; f>1800MHz: waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not effect the E" field uncertainty inside TSL (see below ConvF). e NORMMx,y.z = NORMx,y,.z* frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. e DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep (no uncertainty required). DCP does not depend on frequency nor media. e PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics. e Ax,y,z; Bx,y,2; Cx,yz;VRx,y,z:A,B,C are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. e ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f<800MHz) and inside waveguide using analytical field distributions based on power measurements for f >800MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty valued are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z* ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity ffom+50MHz to100MHz. e Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. e Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. e Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: Z16—97123 Page 2 of 11

In Callaboration with a=/"["/, a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@ehinattl.com bittpy/Aviww.chinattl.on Probe ES3DV3 SN: 3270 Calibrated: August 26, 2016 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: Z16—97123 Page 3 of 11

h In Callaboration with =‘/"["J, a mm CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hep://www.chinattl.on DASY/EASY — Parameters of Probe: ES3DV3 — SN: 3270 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm{(uV/(V/im)")* 1.09 1.22 1.19 £10.8% DCP(my)® 100.9 103.3 101.0 Modulation Calibration Parameters uiD Communication A B C D VR Unc System Name dB dB~uV dB mVy (k=2) 0 Cw X 0.0 0.0 1.0 0.00 274.7 +2.7% Y 0.0 0.0 1.0 295.4 Z 0.0 0.0 1.0 288.4 The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. * The uncertainties of Norm X, Y, Z do not affect the E®—field uncertainty inside TSL (see Page 5 and Page 6). ® Numerical linearization parameter: uncertainty not required. & Uncertainly is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: Z716—97123 Page 4 of 11

_h In Callaboration with a ‘/"/"‘/_ sC gbo e a g t CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinatt].com Hittps//www.chinattl.en DASY/EASY — Parameters of Probe: ES3DV3 — SN: 3270 Calibration Parameter Determined in Head Tissue Simulating Media £MHz® . s G Pe’:;‘:;‘\"’i‘:y . °°"‘z‘s"l’r:‘)":y ConvF X ConvF Y ConvF Z Alpha® D(:’:; :‘::;t) 750 41.9 0.39 619 6.19 619 050 135 £12% 835 41.5 5.90 6.03 6.03 603 042 147 +12% 900 41.5 0.97 6.09 6.09 609 037 161 £12% 1750 401 1.37 5.21 5.21 521 052 153 £12% 1900 40.0 1.40 5.08 5.08 508 055 1.50 +12% 2000 40.0 1.40 4.98 4.98 498 057 147 +12% 2100 39.8 1.49 5.02 5.02 5.02 0.68 141 £12% 2450 39.2 1.80 4.51 4.51 451 0.73 1.30 £12% 2600 39.0 1.96 4.37 4. 37 437 090 113 £12% © Frequency validity above 300 MHz of +100MHz only applies for DASY v4.4 and higher (Page 2), else it is restricted to #50MHz. The uncertainty is the RSS of ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to * 110 MHz. "At frequency below 3 GHz, the validity of tissue parameters (e and 0) can be relaxed to £10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (¢ and 0) is restricted to +5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. GAIpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for the frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: Z16—97123 Page 5 of 11

r In Collaboration with @7TL s p_ e a q y CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hitpol/www.chinattl.cn DASY/EASY — Parameters of Probe: ES3DV3 — SN: 3270 Calibration Parameter Determined in Body Tissue Simulating Media — — 5 fImHz]® Pe'::":;':;y ¢ C°"‘:;7;:‘)"Fty ConvF X ConvF Y ConvF Z Alpha® D(‘;:’;h) ::(';; 750 55.5 0.96 6.09 6.09 6094 050 135 +12% 835 55 2 0.97 6.01 5.01 601 042 1.60 +12% 1750 53.4 1.49 4.95 4.95 495 0.50 166 +12% 1900 53.3 1.52 4.70 4.70 470 0.53 164 £12% 2450 52.7 1.95 4.28 4.28 428 0.90 120 £12% 2600 525 216 412 412 412 0.90 118 +12% © Frequency validity above 300 MHz of £100MHz only applies for DASY v4.4 and higher (Page 2), efse it is restricted to #50MHz. The uncertainty is the RSS of ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. "At frequency below 3 GHz, the validity of tissue parameters (e and 0) can be relaxed to £10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (¢ and 0) is restricted to +5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. GAIpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1%for frequencies below 3 GHz and below + 2% for the frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: Z16—97123 Page 6 of 1J

__r\ In Collaboration with am/"["J, a y CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hupy/www.chinattl.on Frequency Response of E—Field (TEM—Cell: ifi110 EXX, Waveguide: R22) Frequency response (normalized) 0 OcE 500 1000 1500 Esc 2000 y 2500 T 3000 c*— f [MHz TEM [MHz] Ca, Uncertainty of Frequency Response of E—field: £7.5% (k=2) Certificate No: Z16—97123 Page 7 of 11

! = In Collaboration with %TTL a CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail; citl@chinattl.com Hup:y//www.ehinattl. Receiving Pattern (®), 0=0° f=600 MHz, TEM f=1800 MHz, R22 i 0.5 uU] 00 5 regre® aogert io f e—_ bibegicey Aoa—a w t h* n notieg 4k 4t ~*~¥o+—s—4—<t—A 2 L —0.5 40 ; —+ T T T T T +150 —100 —50 0 so 100 150 Gurciteriey —o...... . ROHFST (~+~ 100MHz _ 600MHz 1800MHz _ — 2500MHz Uncertainty of Axial Isotropy Assessment: £0.9% (K=2) Certificate No: Z16—97123 Page 8 of 11

r In Callaboration with oam‘/"["/, a § : CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hitpy/www.chinattl.en Dynamic Range f(SARneaq) (TEM cell, f= 900 MHz)_ _ cinl Input Signal[uV] B 10 10° 10° 10° 10‘ 10 SAR[mW/em‘] Enot compensated —@— compensated m C T 2 "n. m 53: .‘ § {11 im/ 1j 2 4 i——————mf m———— + oo m—————m_ 10° 10‘ 10° 10‘ 10° SAR[mW/cm ] z —e—not compensated #— compensated Uncertainty of Linearity Assessment: £0.9% (k=2) Certificate No: Z16—97123 Page 9 of 11

in Collaboration with ETTL a_ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hup://www.chinattl.c Conversion Factor Assessment f=900 MHz, WGLS R9(H_convF) f=1750 MHz, WGLS R22(H_convF) im omm ts ; l n .‘1 sson } | \ ‘ | | saRfwnoay SAR[Wnghnt S 10.90 5.00 4 00 9 10 20 20 40 50 60 T0 z|mm} zimm] [ —@—measurad —analytical [ —»—messured ——analytical Deviation from Isotropy in Liquid 1.0 0.8 06 04 0. 2 7 Auis 0.0 —0.2 —0 4 —0.6 —0 8 1g 4 150 200 ‘q-\'/;g. 250 10 @0 .060 040 .020 0 020 o4o oco 080 10 Uncertainty of Spherical Isotropy Assessment: +2.8% (K=2) Certificate No: Z16—97123 Page 10 of 11

4me In Collaboration with =‘7/"/‘/, s p_ e a g ‘ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2218 Fax: +86—10—62304633—2209 E—mail: cttl@chinattl.com Hitps//www.chinattl.en DASY/EASY — Parameters of Probe: ES3DV3 — SN: 3270 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) 168.9 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disable Probe Overall Length 337mm Probe Body Diameter 10mm Tip Length 10mm Tip Diameter 4mm Probe Tip to Sensor X Calibration Point 2mm Probe Tip to Sensor Y Calibration Point 2mm Probe Tip to Sensor Z Calibration Point 2mm Recommended Measurement Distance from Surface 3mm Certificate No: Z16—97123 Page 11 of 11


Document Created: 2019-10-09 14:56:48
Document Modified: 2019-10-09 14:56:48
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC