Modular Approval Letter

FCC ID: Z64-CC3135MOD

Cover Letter(s)

Download: PDF
FCCID_4397646

Texas Instruments Incorporated 12500 TI Boulevard, M/S D2000, Dalllas, TX, United States 75243 Tel: 214—567—5409 ; Fax: 214—479—5605 Date: June 4, 2019 Request for Modular Approval for FCC ID: 264—CC3135MOD Item Requirements EUT 1. The modular transmitter must have its own The module is equipped with its own shielding case RF shielding. that is soldered and cannot be removed by the customer. 2. The modular transmitter must have The module has buffer modulation / data inputs. buffered modulation / data inputs. 3. The modular transmitter must have its own The module has its own power supply regulation. power supply regulation. | 4. The module must contain a permanently The requirements of the antenna(s) and spurious attached antenna, or contain a unique emissions have been fulfilled. Please refer to the antenna connector, and be marketed and test report and the integrator instructions of this operated only with specific antennal(s}, filing. 5. The modular transmitter must be tested in a The module was tested on a stand—alone evaluation stand—alone configuration. board and it‘s not inside of another device during testing 6. The modular transmitter must be labeled The module transmitter will be labeled with its own with its own FCC ID number. FCC ID, and for OEM integration the integration manual contains labeling instructions for the host device per Part 15.212 (vi) 7. The modular transmitter must comply with The module approved transmitter complies with all any specific rule or operating requirements applicable rules and the integration manual applicable to the transmitter and the contains any specific requirements addressed to manufacturer must provide adequate the integrator and/or to the end—user of the final instructions along with the module to end—product. explain any such requirements. 8. The modular transmitter must comply with The module complies with the FCC RF exposure any applicable RF exposure requirement. requirements for fixed and mobile applications. RF _V exposure is addressed in the RF exposure exhibit. attias Lan m—lange@ti.com


Document Created: 2019-08-08 19:00:00
Document Modified: 2019-08-08 19:00:00
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC