Cover Letters

FCC ID: Z64-CC3100MODR1

Cover Letter(s)

Download: PDF
FCCID_2421108

1J Texas INsTRUMENTS Texas Instruments Incorporated 12500 T.1. Blvd. Dallas, TX 75243 October 16, 2014 Re: Modular Approval Request —FCC FCC ID.: 264—CC3100MODR1 Product Name: CC3100MODR11MAMOB To whom it may concern: Pursuant to the requirements of DAOO—1407 and 996369 "D01 Module Equip Auth Guide v01" for modular approval of Part 15 devices: Requirement Comments/Declaration i. The radio elements must have the radio frequency The radio module has its own RF shielding. circuitry shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. i. The module must have buffered modulation/data The modulation inputs are buffered data inputs such that inputs to ensure that the device will comply with Part modulation is limited. 15 requirements with any type of input signal. iil, The module must contain power supply regulation on The module has power input regulation on the power supply the module. input on the module board. iv. The module must contain a permanently attached The module is to be marketed and operated only with antenna, or contain a unique antenna connector, and specific antennal(s). be marketed and operated only with specific Specific antennas are detailed in the filing. antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). v. The module must demonstrate compliance in a The module was tested in a stand—alone configuration. The stand—alone configuration | module was placed on an evaluation board to provide power | and to control functions for testing but the module was not placed in any enclosure for testing. vi. The module must be labeled with its permanently The module is labeled with its own permanently affixed ID affixed FCC ID label, or use an electronic display label. vii. The module must comply with all specific rules The grantee has provided instructions to explain compliance applicable to the transmitter. The grantee must requirements. provide comprehensive instructions to explain compliance requirements. vill. The module must comply with RF exposure The device meets the requirements for rf exposure in a requirements. mobile configuration as provided. Dated this 16th Day of October 20 14 By: dl(LO_Q_Q_; q‘ .;30oljar— Kelley J. Foltz J Signature a__, Printed Title: _T.l. EP EVM Planning Manager On behalf of: Texas Instruments Incorporated E—mail: FOLTZ@ti.com Telephone: 214—882—9119


Document Created: 2014-10-16 14:49:51
Document Modified: 2014-10-16 14:49:51
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC