RF Exposure Info (MPE).pdf

FCC ID: Z3M-GSYP1J11

RF Exposure Info

Download: PDF
FCCID_2325566

RF EXPOSURE REPORT REPORT NO.: SA140605E05 SYP1-J1100-GR, SYP1-J11YY-XX MODEL NO.: (YY-Colour Variant (0~9 and A~Z) and XX-Customer Variant (0~9 and A~Z)) FCC ID: Z3M-GSYP1J11 RECEIVED: June 05, 2014 TESTED: June 18, 2014 ISSUED: July 04, 2014 APPLICANT: Greenwave Systems Pte Ltd ADDRESS: 41 Science Park Road, #03-01, The Gemini, Science Park II, Singapore, 117610 Singapore ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory LAB ADDRESS: No. 81-1, Lu Liao Keng, 9th Ling,Wu Lung Tsuen, Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: SA140605E05 1 of 6 Report Format Version 5.0.0

TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION...................................................................................................... 4 2. RF EXPOSURE LIMIT ............................................................................................. 5 3. MPE CALCULATION FORMULA ............................................................................. 5 4. CLASSIFICATION.................................................................................................... 5 5. ANTENNA GAIN ...................................................................................................... 5 6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .......................... 6 Report No.: SA140605E05 2 of 6 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140605E05 Original release July 04, 2014 Report No.: SA140605E05 3 of 6 Report Format Version 5.0.0

cu ve ovil> BUHS 1828 1. CERTIFICATION PRODUCT: Wireless Motion Sensor BRAND NAME: greenwave systems SYP1—J1100—GR, MODEL NO.: sYPA1—J11YY—XX (YY¥—Colour Variant (0~9 and A~Z) and XX—Customer Variant (0~9 and A~Z)) TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Greenwave Systems Pte Ltd TESTED DATE: June 18, 2014 STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01—01) IEEE C95.1 The above equipment (Model: SYP1—J1100—GR) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample‘s EMC characteristics under the conditions specified in this report. PREPARED BY : Dhs eay;s Huanz _ — DATE:_ July 04, 2014 l ( Phoenix Huang, Specialist ) APPROVEDBY : _\ _—_—7 , DATE:_Jw) 04, 2014 ~ ( May Chffu, Manager) Report No.: SA140605E05 4 of 6 Report Format Version 5.0.0

2. RF EXPOSURE LIMIT LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY ELECTRIC FIELD MAGNETIC FIELD POWER DENSITY AVERAGE TIME RANGE (MHz) STRENGTH (V/m) STRENGTH (A/m) (mW/cm2) (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 … … F/1500 30 1500-100,000 … … 1.0 30 F = Frequency in MHz 3. MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 4. CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 5. ANTENNA GAIN The antenna provided to the EUT, please refer to the following table: Antenna Frequency range Brand Antenna Type Gain(dBi) Connector (GHz) NA PCB NA 1.2 2.4~2.4835 Report No.: SA140605E05 5 of 6 Report Format Version 5.0.0

6. CALCULATION RESULT OF MAXIMUM CONDUCTED POWER For Zigbee FREQUENCY CONDUCTED ANTENNA POWER DISTANCE LIMIT BAND POWER GAIN DENSITY (cm) (mW/cm2) (MHz) (mW) (dBi) (mW/cm2) 2405 - 2480 1.694 1.2 20 0.00044 1.00 --- END --- CONCLUSION: Both of the WLAN and Zigbee can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ……etc. < 1 CPD = Calculation power density LPD = Limit of power density Therefore, the worst-case situation is 0.10417 / 1 + 0.00367 / 1= 0.108, which is less than “1”. This confirmed that the device comply with FCC 1.1310 MPE limit. Report No.: SA140605E05 6 of 6 Report Format Version 5.0.0


Document Created: 2014-07-07 09:39:56
Document Modified: 2014-07-07 09:39:56
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC