Test Report.pdf

FCC ID: Z3M-GSYP1J11

Test Report

Download: PDF
FCCID_2325563

FCC TEST REPORT REPORT NO.: RF140605E05 MODEL NO.: SYP1-J1100-GR, SYP1-J11YY-XX (YY-Colour Variant (0~9 and A~Z) and XX-Customer Variant (0~9 and A~Z)) FCC ID: Z3M-GSYP1J11 RECEIVED: June 05, 2014 TESTED: June 10 to 18, 2014 ISSUED: July 04, 2014 APPLICANT: Greenwave Systems Pte Ltd ADDRESS: 41 Science Park Road, #03-01, The Gemini, Science Park II, Singapore, 117610 Singapore Bureau Veritas Consumer Products Services (H.K.) ISSUED BY: Ltd., Taoyuan Branch Hsin Chu Laboratory No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, LAB ADDRESS : Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. No. 81-1, Lu Liao Keng, 9th Ling, Wu Lung Tsuen, TEST LOCATION (1): Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. No. 49, Ln. 206, Wende Rd., Shangshan Tsuen, TEST LOCATION (2): Chiung Lin Hsiang, Hsin Chu Hsien 307, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Report No.: RF140605E05 1 of 34 Report Format Version 5.2.0

Table of Contents RELEASE CONTROL RECORD .......................................................................................... 4 1. CERTIFICATION ...................................................................................................... 5 2. SUMMARY OF TEST RESULTS .............................................................................. 6 2.1 MEASUREMENT UNCERTAINTY ........................................................................... 7 3. GENERAL INFORMATION ....................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ......................................................................... 8 3.2 DESCRIPTION OF TEST MODES ........................................................................... 9 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ......................... 10 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ........................................ 12 3.4 DUTY CYCLE OF TEST SIGNAL ........................................................................... 13 3.5 DESCRIPTION OF SUPPORT UNITS ................................................................... 14 3.6 CONFIGURATION OF SYSTEM UNDER TEST .................................................... 14 4. TEST TYPES AND RESULTS ................................................................................ 15 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT................................. 15 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .............. 15 4.1.2 TEST INSTRUMENTS ........................................................................................... 16 4.1.3 TEST PROCEDURES ............................................................................................ 17 4.1.4 DEVIATION FROM TEST STANDARD .................................................................. 17 4.1.5 TEST SETUP ......................................................................................................... 18 4.1.6 EUT OPERATING CONDITIONS ........................................................................... 18 4.1.7 TEST RESULTS ..................................................................................................... 19 4.2 6DB BANDWIDTH MEASUREMENT ..................................................................... 23 4.2.1 LIMITS OF 6DB BANDWIDTH MEASUREMENT .................................................. 23 4.2.2 TEST INSTRUMENTS ........................................................................................... 23 4.2.3 TEST PROCEDURE .............................................................................................. 23 4.2.4 DEVIATION FROM TEST STANDARD .................................................................. 23 4.2.5 TEST SETUP ......................................................................................................... 23 4.2.6 EUT OPERATING CONDITIONS ........................................................................... 23 4.2.7 TEST RESULTS ..................................................................................................... 24 4.3 CONDUCTED OUTPUT POWER MEASUREMENT ............................................. 25 4.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT ........................... 25 4.3.2 TEST INSTRUMENTS ........................................................................................... 25 4.3.3 TEST PROCEDURES ............................................................................................ 25 4.3.4 DEVIATION FROM TEST STANDARD .................................................................. 25 4.3.5 TEST SETUP ......................................................................................................... 25 4.3.6 EUT OPERATING CONDITIONS ........................................................................... 25 4.3.7 TEST RESULTS ..................................................................................................... 26 4.4 POWER SPECTRAL DENSITY MEASUREMENT ................................................. 27 4.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT .............................. 27 4.4.2 TEST INSTRUMENTS ........................................................................................... 27 4.4.3 TEST PROCEDURE .............................................................................................. 27 4.4.4 DEVIATION FROM TEST STANDARD .................................................................. 27 4.4.5 TEST SETUP ......................................................................................................... 27 4.4.6 EUT OPERATING CONDITION ............................................................................. 27 4.4.7 TEST RESULTS ..................................................................................................... 28 4.5 CONDUCTED OUT-BAND EMISSION MEASUREMENT...................................... 29 4.5.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT ................... 29 4.5.2 TEST INSTRUMENTS ........................................................................................... 29 4.5.3 TEST PROCEDURE .............................................................................................. 29 4.5.4 DEVIATION FROM TEST STANDARD .................................................................. 30 Report No.: RF140605E05 2 of 34 Report Format Version 5.2.0

4.5.5 TEST SETUP ......................................................................................................... 30 4.5.6 EUT OPERATING CONDITION ............................................................................. 30 4.5.7 TEST RESULTS ..................................................................................................... 30 5. PHOTOGRAPHS OF THE TEST CONFIGURATION............................................. 32 6. INFORMATION ON THE TESTING LABORATORIES ........................................... 33 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ........................................................................................... 34 Report No.: RF140605E05 3 of 34 Report Format Version 5.2.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF140605E05 Original release July 04, 2014 Report No.: RF140605E05 4 of 34 Report Format Version 5.2.0

oV v& s vIlP Uns B 1828 1. CERTIFICATION PRODUCT: Wireless Motion Sensor BRAND NAME: greenwave systems SYP1—J1100—GR, MODEL NO.—: gypA1—J11YY—XX (YY—Colour Variant (0~9 and A~Z) and XX—Customer Variant (0~9 and A~Z)) TEST SAMPLE: ENGINEERING SAMPLE APPLICANT: Greenwave Systems Pte Ltd TESTED: June 10 to 18, 2014 STANDARDS: FCC Part 15, Subpart C (Section 15.247) ANSI C63.10—2009 The above equipment (Model: SYP1—J1100—GR) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample‘s EMC characteristics under the conditions specified in this report. PREPARED BY : [hoegase MHhaumzy s DATE:_July 04, 2014 l ( Phoenix Huang, Specii\liytf APPROVED BY : x // , —DATE:__Jz/y 04, 2014 /fi/lay Chen%fianager ) Report No.: RF140605E05 5 of 34 Report Format Version 5.2.0

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC PART 15, SUBPART C (SECTION 15.247) STANDARD TEST TYPE RESULT REMARK SECTION NA Power supply is DC 3V from 15.207 AC Power Conducted Emission battery 15.247(d) Meet the requirement of limit. Radiated Emissions PASS Minimum passing margin is 15.209 -0.7dB at 2483.50MHz 15.247(d) Band Edge Measurement PASS Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth PASS Meet the requirement of limit. 15.247(b) Conducted output power PASS Meet the requirement of limit. 15.247(e) Power Spectral Density PASS Meet the requirement of limit. 15.203 Antenna Requirement PASS No antenna connector is used. Report No.: RF140605E05 6 of 34 Report Format Version 5.2.0

2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Value Radiated emissions (30MHz-1GHz) 5.43 dB Radiated emissions (1GHz -6GHz) 3.72 dB Radiated emissions (6GHz -18GHz) 4.00 dB Radiated emissions (18GHz -40GHz) 4.11 dB Report No.: RF140605E05 7 of 34 Report Format Version 5.2.0

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Wireless Motion Sensor MODEL NO. SYP1-J1100-GR, SYP1-J11YY-XX (YY-Colour Variant (0~9 and A~Z) and XX-Customer Variant (0~9 and A~Z)) POWER SUPPLY DC 3V from battery MODULATION TYPE O-QPSK TRANSFER RATE 250kbps OPERATING 2405 ~ 2480MHz FREQUENCY NUMBER OF 16 CHANNEL MAXIMUM OUTPUT 1.694mW POWER ANTENNA TYPE Please see NOTE DATA CABLE NA I/O PORTS Refer to user’s manual ASSOCIATED NA DEVICES NOTE: 1. The EUT has below model names which are identical to each other in all aspects except for the following table: Brand Model No. Description SYP1-J1100-GR SYP1-J11YY-XX For marketing greenwave systems YY – Colour Variant (0~9 and A~Z) requirement XX – Customer Variant (0~9 and A~Z) From the above models, model: SYP1-J1100-GR was selected as representative model for the test and its data was recorded in this report. 2. The antenna provided to the EUT, please refer to the following table: Antenna Frequency range Brand Antenna Type Gain(dBi) Connector (GHz) NA PCB NA 1.2 2.4~2.4835 3. The above EUT information was declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF140605E05 8 of 34 Report Format Version 5.2.0

3.2 DESCRIPTION OF TEST MODES 16 channels are provided to this EUT. Freq. Freq. Freq. Freq. Channel Channel Channel Channel (MHz) (MHz) (MHz) (MHz) 11 2405 15 2425 19 2445 23 2465 12 2410 16 2430 20 2450 24 2470 13 2415 17 2435 21 2455 25 2475 14 2420 18 2440 22 2460 26 2480 Report No.: RF140605E05 9 of 34 Report Format Version 5.2.0

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE PLC RE < 1G RE  1G APCM OB - - √ √ √ √ - Where PLC: Power Line Conducted Emission RE < 1G: Radiated Emission below 1GHz RE  1G: Radiated Emission above 1GHz APCM: Antenna Port Conducted Measurement OB: Conducted Out-Band Emission Measurement NOTE: 1. The EUT’s antenna had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane (for below 1GHz) and X-plane (for above 1GHz). NOTE: 2. No need to concern of Conducted Emission due to the EUT is powered by battery RADIATED EMISSION TEST (BELOW 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE CHANNEL CHANNEL TECHNOLOGY TYPE (kbps) 11 to 26 11 DSSS O-QPSK 250 RADIATED EMISSION TEST (ABOVE 1 GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE CHANNEL CHANNEL TECHNOLOGY TYPE (kbps) 11 to 26 11, 18, 26 DSSS O-QPSK 250 Report No.: RF140605E05 10 of 34 Report Format Version 5.2.0

ANTENNA PORT CONDUCTED MEASUREMENT: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE CHANNEL CHANNEL TECHNOLOGY TYPE (kbps) 11 to 26 11, 18, 26 DSSS O-QPSK 250 CONDUCTED OUT-BAND EMISSION MEASUREMENT: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE CHANNEL CHANNEL TECHNOLOGY TYPE (kbps) 11 to 26 11, 26 DSSS O-QPSK 250 TEST CONDITION: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE<1G 25deg. C, 65%RH DC: 3V Andy Ho RE1G 25deg. C, 65%RH DC: 3V Tim Ho APCM 25deg. C, 60%RH DC: 3V Robert Cheng OB 25deg. C, 60%RH DC: 3V Robert Cheng Report No.: RF140605E05 11 of 34 Report Format Version 5.2.0

3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r01 ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Note: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. (待確認有無 DoC Logo) Report No.: RF140605E05 12 of 34 Report Format Version 5.2.0

3.4 DUTY CYCLE OF TEST SIGNAL Duty cycle of test signal is 100 %, duty factor is not required. Zigbee Report No.: RF140605E05 13 of 34 Report Format Version 5.2.0

3.5 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. NO. PRODUCT BRAND MODEL NO. SERIAL NO. FCC ID 1 Battery LISUN CR123A NA NA NO. SIGNAL CABLE DESCRIPTION OF THE ABOVE SUPPORT UNITS 1 NA NOTE: All power cords of the above support units are non shielded (1.8m). 3.6 CONFIGURATION OF SYSTEM UNDER TEST 1 EUT (Power from battery) Data Cable × 3 (0.1m; for setup use) TEST TABLE Note: 1. The support unit 1 is a battery. Report No.: RF140605E05 14 of 34 Report Format Version 5.2.0

4. TEST TYPES AND RESULTS 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100 3 88-216 150 3 216-960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF140605E05 15 of 34 Report Format Version 5.2.0

4.1.2 TEST INSTRUMENTS Below 1GHz test DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL MXE EMI Receiver N9038A MY50010156 Jan. 15, 2014 Jan. 14, 2015 Agilent Pre-Amplifier ZFL-1000VH2 AMP-ZFL-04 Nov. 13, 2013 Nov. 12, 2014 Mini-Circuits B Trilog Broadband Antenna VULB 9168 9168-361 Feb. 27, 2014 Feb. 26, 2015 SCHWARZBECK RF Cable NA CHHCAB_001 Oct. 06, 2013 Oct. 05, 2014 Spectrum Analyzer FSV40 100964 July 15, 2013 July 14, 2014 R&S Horn_Antenna AIH.8018 0000220091110 Dec. 06, 2013 Dec. 05, 2014 AISI Pre-Amplifier 8449B 3008A01923 Oct. 29, 2013 Oct. 28, 2014 Agilent RF104-205 RF Cable NA RF104-207 Dec. 12, 2013 Dec. 11, 2014 RF104-202 Spectrum Analyzer E4446A MY48250253 Aug. 28, 2013 Aug. 27, 2014 Agilent Pre-Amplifier SLKKa-48-6 9K16 Nov. 13, 2013 Nov. 12, 2014 SPACEK LABS Horn_Antenna BBHA 9170 9170-424 Oct. 08, 2013 Oct. 07, 2014 SCHWARZBECK ADT_Radiated Software NA NA NA _V8.7.07 Antenna Tower & Turn Table NA NA NA NA CT Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna, preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3 The test was performed in 966 Chamber No. H. 4. The FCC Site Registration No. is 797305. 5 The CANADA Site Registration No. is IC 7450H-3. 6 Tested Date: June 10 to 13, 2014 Report No.: RF140605E05 16 of 34 Report Format Version 5.2.0

4.1.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 DEVIATION FROM TEST STANDARD No deviation Report No.: RF140605E05 17 of 34 Report Format Version 5.2.0

4.1.5 TEST SETUP <Frequency Range below 1GHz> Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver <Frequency Range above 1GHz> Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the related item – Photographs of the Test Configuration. 4.1.6 EUT OPERATING CONDITIONS Same as 4.1.6 1. Controlling software (HyperTerminal command) has been activated to set the EUT on specific status. Report No.: RF140605E05 18 of 34 Report Format Version 5.2.0

4.1.7 TEST RESULTS BELOW 1GHz WORST-CASE DATA Zigbee CHANNEL TX Channel 11 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 76.12 30.8 QP 40.0 -9.2 2.00 H 303 47.23 -16.44 2 137.48 31.7 QP 43.5 -11.8 1.00 H 360 44.83 -13.16 3 257.76 36.9 QP 46.0 -9.1 2.00 H 125 50.33 -13.41 4 315.03 35.0 QP 46.0 -11.0 1.50 H 143 46.06 -11.04 5 486.82 37.8 QP 46.0 -8.2 1.00 H 32 45.08 -7.24 6 769.43 37.6 QP 46.0 -8.4 2.00 H 360 38.92 -1.31 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 76.32 30.5 QP 40.0 -9.5 2.00 V 1 47.04 -16.53 2 107.99 33.0 QP 43.5 -10.5 1.00 V 303 48.81 -15.80 3 138.45 35.6 QP 43.5 -7.9 1.00 V 93 48.68 -13.07 4 330.02 33.5 QP 46.0 -12.5 1.00 V 309 44.18 -10.64 5 825.01 35.6 QP 46.0 -10.4 1.00 V 246 36.17 -0.54 6 940.59 36.9 QP 46.0 -9.2 1.50 V 99 35.48 1.37 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF140605E05 19 of 34 Report Format Version 5.2.0

ABOVE 1GHz DATA Zigbee CHANNEL TX Channel 11 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2374.00 50.8 PK 74.0 -23.2 1.11 H 211 56.42 -5.62 2 2374.00 42.2 AV 54.0 -11.8 1.11 H 211 47.82 -5.62 3 *2405.00 102.8 PK 1.11 H 211 108.37 -5.57 4 *2405.00 99.0 AV 1.11 H 211 104.57 -5.57 5 4810.00 49.6 PK 74.0 -24.4 1.50 H 149 45.73 3.87 6 4810.00 36.4 AV 54.0 -17.6 1.50 H 149 32.53 3.87 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2374.00 47.7 PK 74.0 -26.3 1.00 V 45 53.32 -5.62 2 2374.00 35.4 AV 54.0 -18.6 1.00 V 45 41.02 -5.62 3 *2405.00 95.4 PK 1.00 V 45 100.97 -5.57 4 *2405.00 90.7 AV 1.00 V 45 96.27 -5.57 5 4810.00 48.4 PK 74.0 -25.6 1.00 V 300 44.53 3.87 6 4810.00 35.2 AV 54.0 -18.8 1.00 V 300 31.33 3.87 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF140605E05 20 of 34 Report Format Version 5.2.0

CHANNEL TX Channel 18 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 100.8 PK 1.08 H 214 106.21 -5.41 2 *2440.00 96.7 AV 1.08 H 214 102.11 -5.41 3 4880.00 50.0 PK 74.0 -24.0 1.46 H 141 46.20 3.80 4 4880.00 36.8 AV 54.0 -17.2 1.46 H 141 33.00 3.80 5 7320.00 54.8 PK 74.0 -19.2 1.65 H 28 46.53 8.27 6 7320.00 40.8 AV 54.0 -13.2 1.65 H 28 32.53 8.27 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 93.4 PK 1.00 V 272 98.81 -5.41 2 *2440.00 88.5 AV 1.00 V 272 93.91 -5.41 3 4880.00 47.9 PK 74.0 -26.1 1.00 V 302 44.10 3.80 4 4880.00 34.8 AV 54.0 -19.2 1.00 V 302 31.00 3.80 5 7320.00 54.0 PK 74.0 -20.0 1.00 V 335 45.73 8.27 6 7320.00 41.8 AV 54.0 -12.2 1.00 V 335 33.53 8.27 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF140605E05 21 of 34 Report Format Version 5.2.0

CHANNEL TX Channel 26 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 98.3 PK 1.05 H 215 103.53 -5.23 2 *2480.00 93.8 AV 1.05 H 215 99.03 -5.23 3 2483.50 64.4 PK 74.0 -9.6 1.05 H 215 69.60 -5.20 4 2483.50 53.3 AV 54.0 -0.7 1.05 H 215 58.50 -5.20 5 4960.00 49.9 PK 74.0 -24.1 1.47 H 129 46.07 3.83 6 4960.00 36.4 AV 54.0 -17.6 1.47 H 129 32.57 3.83 7 7440.00 55.3 PK 74.0 -18.7 1.68 H 15 46.62 8.68 8 7440.00 41.1 AV 54.0 -12.9 1.68 H 15 32.42 8.68 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 90.8 PK 1.00 V 360 96.03 -5.23 2 *2480.00 84.7 AV 1.00 V 360 89.93 -5.23 3 2483.50 55.7 PK 74.0 -18.3 1.00 V 360 60.90 -5.20 4 2483.50 44.9 AV 54.0 -9.1 1.00 V 360 50.10 -5.20 5 4960.00 47.2 PK 74.0 -26.8 1.00 V 304 43.37 3.83 6 4960.00 34.3 AV 54.0 -19.7 1.00 V 304 30.47 3.83 7 7440.00 53.8 PK 74.0 -20.2 1.01 V 347 45.12 8.68 8 7440.00 41.6 AV 54.0 -12.4 1.01 V 347 32.92 8.68 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF140605E05 22 of 34 Report Format Version 5.2.0

4.2 6dB BANDWIDTH MEASUREMENT 4.2.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL SPECTRUM ANALYZER FSV 40 100964 July 15, 2013 July 14, 2014 R&S Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 18, 2014 4.2.3 TEST PROCEDURE 1. Set resolution bandwidth (RBW) = 100kHz 2. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. 3. Trace mode = max hold. 4. Sweep = auto couple. 5. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.2.4 DEVIATION FROM TEST STANDARD No deviation 4.2.5 TEST SETUP SPECTRUM EUT Attenuator ANALYZER 4.2.6 EUT OPERATING CONDITIONS The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF140605E05 23 of 34 Report Format Version 5.2.0

4.2.7 TEST RESULTS 6dB FREQUENCY MINIMUM LIMIT CHANNEL BANDWIDTH PASS / FAIL (MHz) (MHz) (MHz) 11 2405 1.50 0.5 PASS 18 2440 1.54 0.5 PASS 26 2480 1.61 0.5 PASS SPECTRUM PLOT OF WORST VALUE CH11 Report No.: RF140605E05 24 of 34 Report Format Version 5.2.0

4.3 CONDUCTED OUTPUT POWER MEASUREMENT 4.3.1 LIMITS OF CONDUCTED OUTPUT POWER MEASUREMENT For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.3.2 TEST INSTRUMENTS DESCRIPTION & SERIAL CALIBRATED CALIBRATED MODEL NO. MANUFACTURER NO. DATE UNTIL Power meter ML2495A 1014008 Apr. 30, 2014 Apr. 29, 2015 Anritsu Power sensor MA2411B 0917122 Apr. 30, 2014 Apr. 29, 2015 Anritsu Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 18, 2014 4.3.3 TEST PROCEDURES The peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the peak power level. 4.3.4 DEVIATION FROM TEST STANDARD No deviation. 4.3.5 TEST SETUP EUT Power Sensor Power Meter Attenuator 4.3.6 EUT OPERATING CONDITIONS Same as Item 4.2.6 Report No.: RF140605E05 25 of 34 Report Format Version 5.2.0

4.3.7 TEST RESULTS FOR PEAK POWER FREQUENCY PEAK POWER PEAK POWER CHANNEL LIMIT (dBm) PASS/FAIL (MHz) (mW) (dBm) 11 2405 1.694 2.29 30 PASS 18 2440 1.687 2.27 30 PASS 26 2480 1.663 2.21 30 PASS FOR AVERAGE POWER CHANNEL FREQUENCY (MHz) AVERAGE POWER AVERAGE POWER (mW) (dBm) 11 2405 1.094 0.39 18 2440 1.119 0.49 26 2480 1.084 0.35 Report No.: RF140605E05 26 of 34 Report Format Version 5.2.0

4.4 POWER SPECTRAL DENSITY MEASUREMENT 4.4.1 LIMITS OF POWER SPECTRAL DENSITY MEASUREMENT The Maximum of Power Spectral Density Measurement is 8dBm. 4.4.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL SPECTRUM ANALYZER FSV 40 100964 July 15, 2013 July 14, 2014 R&S Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 18, 2014 4.4.3 TEST PROCEDURE 1. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. 2. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. 3. Use the peak marker function to determine the maximum amplitude level. 4.4.4 DEVIATION FROM TEST STANDARD No deviation 4.4.5 TEST SETUP SPECTRUM EUT Attenuator ANALYZER 4.4.6 EUT OPERATING CONDITION Same as Item 4.3.6 Report No.: RF140605E05 27 of 34 Report Format Version 5.2.0

4.4.7 TEST RESULTS FREQUENCY PSD LIMIT PASS CHANNEL (MHz) (dBm) (dBm) /FAIL 11 2405 -9.92 8 PASS 18 2440 -13.46 8 PASS 26 2480 -13.81 8 PASS SPECTRUM PLOT OF WORST VALUE CH11 Report No.: RF140605E05 28 of 34 Report Format Version 5.2.0

4.5 CONDUCTED OUT-BAND EMISSION MEASUREMENT 4.5.1 LIMITS OF CONDUCTED OUT-BAND EMISSION MEASUREMENT Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.5.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL SPECTRUM ANALYZER FSV 40 100964 July 15, 2013 July 14, 2014 R&S Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. Tested date : June 18, 2014 4.5.3 TEST PROCEDURE Measurement Procedure - Reference Level 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. Measurement Procedure –Unwanted Emission Level 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Set span to encompass the spectrum to be examined 4. Detector = peak. 5. Trace Mode = max hold. 6. Sweep = auto couple. Report No.: RF140605E05 29 of 34 Report Format Version 5.2.0

4.5.4 DEVIATION FROM TEST STANDARD No deviation 4.5.5 TEST SETUP SPECTRUM EUT Attenuator ANALYZER 4.5.6 EUT OPERATING CONDITION Same as Item 4.3.6 4.5.7 TEST RESULTS The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF140605E05 30 of 34 Report Format Version 5.2.0

CH 11 CH 18 CH 26 CH 11 Band edge CH 26 Band edge Report No.: RF140605E05 31 of 34 Report Format Version 5.2.0

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF140605E05 32 of 34 Report Format Version 5.2.0

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab: Hsin Chu EMC/RF Lab: Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26052943 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab: Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF140605E05 33 of 34 Report Format Version 5.2.0

7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. --- END --- Report No.: RF140605E05 34 of 34 Report Format Version 5.2.0


Document Created: 2014-07-08 09:53:53
Document Modified: 2014-07-08 09:53:53
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC