User Manual

FCC ID: Z3CWECCANTOYS

Users Manual

Download: PDF
FCCID_2894551

US_S16_FL_902_A_IM ENGLISH VERSION(BLACK & WHITE) A4 X 12pcs 5F63FD2_New Jawbreaker Technical Data 5F63FD2 Flying time: 5-7 minutes Charging time: 90-110 minutes JAWBREAKER TM Operation range: 25-30m/ 82-100feet Battery for the controller: 6 x AA (not included) Battery for helicopter: 3.7V 380 mAh Frequency: 2.4G Features:Up/down,forward/backward,turn left/right Main blade length: 26cm/ 10.23inches Helicopter length: 30cm/ 11.81inches Helicopter height: 15.5cm/ 6.1inches Helicopter weight: 81.5g 8+ CONFORMS TO THE SAFETY FAST LANE IS A MARK OF (EST UNE MARQUE DE/ES UNA MARCA DE) GEOFFREY, LLC, A SUBSIDIARY OF REQUIREMENTS OF ASTM F963. (UNE FILIALE DE/UNA SUBSIDIARIA DE) TOYS“R”US, INC. x6 Do not mix old and new batteries. © 2016 GEOFFREY, LLC Do not mix alkaline, standard (carbon-zinc), MADE IN CHINA (FABRIQUÉ EN CHINE/FABRICADO A 3.7V A or rechargeable batteries. EN CHINA) DISTRIBUTED IN THE UNITED STATES BY (DISTRIBUÉ Contents and colors may vary. INCLUDED NOT INCLUDED AUX ÉTATS-UNIS PAR/DISTRIBUIDO EN LOS ESTADOS UNIDOS POR) TOYS“R”US, INC., WAYNE, NJ 07470 IMPORTED BY (IMPORTÉ PAR/IMPORTADO POR) TOYS“R”US (CANADA) LTD. (LTÉE), 2777 LANGSTAFF ROAD, CONCORD, ON L4K 4M5 BC DISTRIBUTED IN AUSTRALIA BY (DISTRIBUÉ EN AUSTRALIE PAR/DISTRIBUIDO EN AUSTRALIA POR) TOYS“R”US (AUSTRALIA (AUSTRALIE)) PTY LTD.(LTÉE), REGENTS PARK NSW 2143 www.toysrus.com www.toysrus.ca Warning with regard to placing the product Do not use this product in an environment where it is exposed to extreme heat or cold, to dust or to damp. Avoid placing the product in an area that is not properly ventilated; do not cover the product and Table of Contents do not place it on carpeting or similar surfaces. Do not place cables behind the product's support. If the cables move (for example as a result of stumbling) the product can fall to the floor! Intended use ............................................................................................................................ Do not expose the product to direct sunlight, fire or other sources of heat that have an extreme effect on the temperature. Safety instructions ................................................................................................................... Intended Use Unpacking and storing Jaw Breaker ....................................................................................... 1. The helicopter is delivered ready to fly and does not need to be charged before your first flight. When you first receive it, do not charge it, just fly it. When the helicopter can no longer take Getting to know Heli ................................................................................................................. off from the ground, let battery cool for 5 minutes before charging. The best performance of helicopter should be after 1st full charge. The performance during discharge process should Assembling Heli ....................................................................................................................... not be treated as defective. Secure the Flight Area ............................................................................................................. 2. This helicopter is delivered with partial-charged Li-Po battery separately, and never over charge the battery. Normally first few charges, will take 1.5-2 hours. Then about 60-70 minutes for a full Flying Heli ................................................................................................................................. charge. Once the charging light turns red,remove the charging cable from the helicopter. Let battery cool for 5 minutes before flying. Taking off ................................................................................................................................. Steering ................................................................................................................................... This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: Landing ..................................................................................................................................... (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause Trimming ................................................................................................................................... undesired operation. Charging ................................................................................................................................... Caution: changes or modifications not expressly approved by the party responsible for Battery care information .......................................................................................................... compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital Flying tips ................................................................................................................................ device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, Trouble diagnoses .................................................................................................................. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is Technical data ........................................................................................................................ no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the deal or experienced radio /TV technician for help. The adaptor be periodically examined for conditions that may result in the risk of fire, electric shock, or injury to persons and that, in an event such conditions, the adaptor should not be used until properly repaired. The safety instructions contained in this manual have to be observed without fail!! Safety instructions Unpacking and storing Heli The Jaw Breaker helicopter is fastened securely in place to avoid any damage during transit. Read the user manual completely before commissioning, then refer to below important The helicopter is a delicate device so you must be careful when removing it from the package. information for correct operation. Ensure the contents are complete with: 1) 1 x helicopter 5) 2 x connectors ( spare part ) 1. To ensure safe operation, the user must comply with the safety instructions and 2) 1 x radio controller 6) 2 x tail blades ( spare part ) warnings contained in this manual. 3) 1 x user manual 7) 1 x screw driver 2. The charger is designed in compliance with protection glass, ensuring that the 4) 4 x main blades ( 1set ,2pcs up & 2pcs lower )( spare part ) insulation (of the housing or the output cable) is neither damaged nor destroyed. 3. The charger should be kept out of the reach of children! Packaging box should be kept for proper storage of the helicopter after each use. Warning: Improper storage of the helicopter may result in the blades bending or warping. 4. Avoid charging operation under adverse ambient conditions. This can lead to damage This will affect flight performance. to the sensitive electronics on the inside of the charger and thus to possible danger for the life of the user. Adverse ambient conditions are: -excessive humidity ( >75% relative, condensing ) Getting to know Jaw Breaker -wetness and dampness, petrol -dust or combustible gas, vapour or solvents Stabilizer -excessive ambient temperature ( > approx, + 40 °C ) Main blade (Dual) The ‘ON/OFF’ switch is located In the case of incorrect handling (excessive charging current or incorrect polarity), the Tail blade at the side of the main body charger may be overcharged or destroyed. Canopy ON/OFF switch 5. Never unplug the plug-in power unit from the mains socket by the connecting cable! Trestle Only hold it by the housing when disconnecting it. Connect charging cable to helicopter Helicopter 6. Keep transmitting devices (mobile telephone, radios, etc.) away from charger, the transmitter radiation arose can lead to interference in charging operation or to destruction of the charger. 7. Never connect your charger to the mains voltage immediately after it has been taken Indicator light Power ON/OFF from a cold room to a warm one. The resulting condensation could, under adverse High/Low speed Trim mode button circumstances, destroy the device. Allow the device to reach room temperature before Throttle Right function lever connecting it to the power supply. (Direction lever) Never touch the charger with wet or moist hands. There is the risk of a fatal electric shock! Installing batteries in the controller of your helicopter Jaw Breaker helicopter is delivered fully assembled and only requires some assembly. See below. Install batteries. 1) Pull and take out the battery cover, (pic.1) 2) Take off the battery cover from the controller, and then install 6pcs (AA) Alkaline batteries in the batteries cage following the correct indicated polarity, Notice: When the power indicator light goes off it means the power is running out, you should renew the batteries. Secure the Flight Area Steering Heli Your Jaw Breaker helicopter is designed for outdoor and indoor playing. Allow a clear space around 1) To turn the helicopter left, move the right hand lever to the left. you in all direction of at least 9.84feet. Make sure to play away from human beings or animals. 2) To turn the helicopter right, move the right hand lever to the right. 3) To fly the helicopter forwards, move the right hand lever forwards. Outdoor use recommended 4) To fly the helicopter backwards, move the right hand lever backwards. more than 9.84feet Begin on a flat surface Keep away from any obstacles Landing Heli 4fe et Avoid flying windy weather conditions 9.8 mor tha n Keep your eyes on the helicopter and be sure the To land the helicopter, slowly move the left lever backwards. e th re an 9 .84fe mo helicopter is within your eyesight et et mor Have an adult accompany children when 4fe et e th .8 6fe an 9 n9 6.5 .84fe flying tha n et re ha mo et mor Keep away from any hard obstacles to avoid any unnecessary damages Trimming Heli This helicopter is fitted with one trimmer control. This will allow you to adjust the flight of the helicopter and erase any unexpected turning tendencies. If the helicopter spins, you need to use the TRIM control to adjust the flying. Flying Heli Push the left lever and keep the helicopter flying upwards between 0.5- 1 meter. Preparing to take off 1) Turn the TRIM leftwards if the helicopter spins right. 1) Switch the controller ‘ON. switch L R L R 2) Switch the helicopter on (‘ON/OFF, switch at the side of the main body). ON OFF 2) Turn the TRIM rightwards if the helicopter spins left. 3) Place the helicopter on a flat, hard surface with the tail pointing Nose Extend towards you. Extend the blades separately, or it may entangle each other and cause the blade to break, or burn out the motor. L R L R 4) Make sure to move the left throttle lever to the lowest position first, and then move it forward and backward. By doing this, the controller Fully forward and backward will be fully forward armed and connected to the helicopter, with the After trimming adjustment, you can also use the right lever to adjust the direction and led light turn on. Please do not touch the helicopter when is searching stop the spinning. for signal from controller. Taking off 1) Move the left lever slowly 2) As you move the left lever past the 3) To ascend, move the left lever forward-the blades will start halfway point, the helicopter will take off. further forward. To descend, slowly to spin move the left lever backwards. Charging Battery care information 1. Before charging, ensure helicopter is switched ‘OFF’. This helicopter is powered by dedicated Li-Po battery. Do not attempt to disassemble the battery or 2. Charging via controller 2.1 Pull out the charging cable from the back side of the controller replace with any after-market model. 2.2 Turn ON the controller(Ensure the AA batteries inside controller not low power) 1) Use only batteries recommended in this user manual. 2.3 Plug the charging cable rod pin into the helicopter charging socket at the side Ensure that batteries are installed with the correct polarity. of the main body.(ref pic.1) 2) Batteries should be installed under adult supervision. 2.4 When in charging, the Red LED light on the controller turns green; when fully 3) Do not allow the battery to become over heated during charging. charged the LED light turns red. 3. Charging time is about 60-70 minutes. 4) Do not leave the battery charging overnight-switch off once the LED lights on the charger. 4. Remove the charging cable from helicopter. 5) Do not use an after-market charger as this can damage the battery. 5. Leave battery to cool for five minutes and the helicopter is ready to fly. 6) Do not short circuit the charging terminals. Note :Be sure that the battery in the helicopter has cooled down for 10-15 minutes after flying PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE. before charging. Examine the adaptor periodically for conditions that may result in the risk of fire, electric shock, or DO: injury to persons and that, in an event of such conditions, the adaptor should not be used until • Make sure battery compartment is secure. properly repaired. • Use batteries of the correct size and type. • Fit batteries correctly observing the plus and minus marks on the battery and compartment. • Replace a whole set of batteries at one time. • Remove dead batteries from equipment. Charging: Connect the battery to the • Remove batteries from appliance before storing. • Please remember that small button cells and AA batteries should be kept away from young (pics 1) charger as shown in the illustration, do not force. children as they could be easily swallowed. Seek medical advice if you believe a cell has been swallowed. DON’T: • Mix different types of batteries. • Mix old and new batteries. • Dispose of batteries in a fire. • Attempt to recharge ordinary batteries. The consumer has a significant role to play in reducing the impact of waste electrical and electronic equipment on the environment, through re-using or recycling such equipment. Some of the components used in electrical and electronic equipment may contain hazardous substances that can damage the environment and present a risk to human health if not property Notes disposed of. The crossed out wheelie-bin symbol on the controller is to remind you that waste electrical and 1) Never leave helicopter charging near a fire or other source of heat. electronic products should not be disposed of with household waste. If you are unable to re-use or 2) Never leave helicopter unattended during charging. recycle your product it should be disposed of at a civic amenity site. Alternatively, you may take 3) Always disconnect from the mains once fully charged, failure to do so WILL DAMAGE your old product (of similar function) back to the store where you purchased your new product THE BATTERY. within 15 days of purchase. You must take proof of purchase of your new product when returning 4) Never disassemble the charger. your old product to the store. 5) Only use the charge that is provided 6) NEVER STORE BATTERY WITHOUT CHARGING FIRST, this will damage the battery. If the blades are damaged, it may not be repaired but has to be replaced with a new one. 7) Charge for a minimum of 10 minutes after use. Broken plastic parts can be sharp-edged. For your own safety, use protective gloves. Flying tips Trouble diagnoses 1) You can expect a flight time of 5-7 minutes after fully charging the battery. Problem Cause Solution 2) When taking off, do not move the left lever too quickly as this will cause the helicopter to topple over. Move the left lever smoothly and continuously forwards until the helicopter takes off. Power switch is turned ‘OFF’ Switch ‘ON’ controller and helicopter 3) When landing, give the helicopter a burst of power just before touching down the floor to slow down the speed and land smoothly. 4) Heli has a range of up to 25-30m. Be aware that the presence of electrical interference may Low battery in the helicopter Charge batteries in helicopter reduce this range. 5) During your first few flights, try to keep the helicopter close to the ground. This will allow you to No function to controller cut the throttle and safely land if you become disorientated. Low battery in the controller Replace battery in controller 6) Always turn the helicopter off immediately after flight. 7) After flying and before recharging, always turn the helicopter and controller off. 8) When not in use, the battery should be disconnected to avoid battery discharge. Controller needs to be ‘armed’ Push left hand lever fully forwards then 9) Recharge the battery before putting it away. fully backwards 10) Check for any damage: examine everything including blades and landing gear. 11) To avoid damage to the motor, always turn the throttle off if the blades become entangled in anything or are prevented from turning, otherwise motors may burn out!! Controller is turned ‘OFF’ Turn controller ‘ON’ No control of helicopter Strong windy day Do not fly it in strong wind as this will limit or disturb your control Helicopter stop by a heavy Turn the helicopter off, then on. impact or crash land. It will work again. Blade speed is too slow Ease the left throttle stick further forward Helicopter is not flying high enough Recharge your helicopter Battery is not fully charged (see Charging instructions) Gyro function Left throttle stick moved Gently move the left throttle stick backwards The following is just suitable for Heli with Gyroscope Helicopter lands too quickly when landing. Remember to give a slight burst too quickly of power just prior to touch down Gyros in RC helicopters are most commonly used to control unwanted movement on the yaw axis. When an RC helicopter rotates on its yaw axis, the direction the Helicopter spins Trimming adjustment See Trimming instructions section nose points in changes. The yaw gyro's job is to sense any undesired rotation around the yaw axis (clockwise or counter- clockwise rotation when viewed from above) and to automatically correct the orientation of the RC helicopter. THE GYRO WILL ENABLE A STABLE FLIGHT FOR THE HELICOPTER.


Document Created: 2015-12-17 14:55:11
Document Modified: 2015-12-17 14:55:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC