Test Report

FCC ID: Z33-CA4

Test Report

Download: PDF
FCCID_1599588

FCC PART 15.249 TEST REPORT For Serene Innovations, Inc. 14731 Carmenita Road, Norwalk, CA, USA FCC ID: Z33-CA4 Report Type: Product Type: Original Report RF module Test Engineer: Allan An Report Number: RSZ110921006-00 Report Date: 2011-12-09 Alvin Huang Reviewed By: EMC Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP*, or any agency of the Federal Government. * This report contains data that are not covered by the NVLAP accreditation and are marked with an asterisk “★” (Rev.2)

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 TABLE OF CONTENTS GENERAL INFORMATION.......................................................................................................................................3 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .....................................................................................3 OBJECTIVE ...................................................................................................................................................................3 RELATED SUBMITTAL(S)/GRANT(S).............................................................................................................................3 TEST METHODOLOGY ..................................................................................................................................................3 TEST FACILITY .............................................................................................................................................................3 SYSTEM TEST CONFIGURATION..........................................................................................................................5 JUSTIFICATION .............................................................................................................................................................5 EQUIPMENT MODIFICATIONS .......................................................................................................................................5 SPECIAL ACCESSORIES .................................................................................................................................................5 CONFIGURATION OF TEST SETUP .................................................................................................................................5 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................5 SUMMARY OF TEST RESULTS ...............................................................................................................................6 FCC§15.203 - ANTENNA REQUIREMENT..............................................................................................................7 APPLICABLE STANDARD ..............................................................................................................................................7 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................................7 FCC§15.205(A) §15.209(A) §15.249(A) §15.249(C) §15.249(D) §15.35 - RADIATED EMISSIONS .....................8 APPLICABLE STANDARD ..............................................................................................................................................8 MEASUREMENT UNCERTAINTY ....................................................................................................................................8 TEST EQUIPMENT SETUP ..............................................................................................................................................8 EUT SETUP ..................................................................................................................................................................9 TEST PROCEDURE ........................................................................................................................................................9 CORRECTED AMPLITUDE & MARGIN CALCULATION .................................................................................................10 TEST EQUIPMENT LIST AND DETAILS .........................................................................................................................10 TEST RESULTS SUMMARY ..........................................................................................................................................10 TEST DATA ................................................................................................................................................................10 FCC Part15.249 Page 2 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 GENERAL INFORMATION Product Description for Equipment under Test (EUT) The Serene Innovations Inc.’s product, model number: CA4 (FCC ID: Z33-CA4), or the "EUT" in this report was a RF module, which was measured approximately: 2.5 cm (L) x 1.6 cm (W) x 0.8 cm (H), rated input voltage: DC 3V. Technical information Frequency band: 2422 MHz Modulation Type: GFSK * All measurement and test data in this report was gathered from production sample serial number: 1109060 (Assigned by BACL, Shenzhen). The EUT was received on 2011-09-21. Objective This report is prepared on behalf of Serene Innovations Inc. in accordance with Part 2, Subpart J, and Part 15, Subparts A, B and C of the Federal Communication Commissions rules. The tests were performed in order to determine compliance with FCC Part 15, Subpart C, and section 15.203, 15.205, 15.207, 15.209 and 15.249 rules. Related Submittal(s)/Grant(s) No related submittal. Test Methodology All measurements contained in this report were conducted with ANSI C63.4-2009, American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the range of 9 kHz to 40 GHz. All radiated and conducted emissions measurement was performed at Bay Area Compliance Laboratories Corp. (Shenzhen). The radiated testing was performed at an antenna-to-EUT distance of 3 meters. Test Facility The Test site used by Bay Area Compliance Laboratories Corp. (Shenzhen) to collect test data is located on the 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China. Test site at Bay Area Compliance Laboratories Corp. (Shenzhen) has been fully described in reports submitted to the Federal Communication Commission (FCC). The details of these reports have been found to be in compliance with the requirements of Section 2.948 of the FCC Rules on December 06, 2010. The facility also complies with the radiated and AC line conducted test site criteria set forth in ANSI C63.4-2009. The Federal Communications Commission has the reports on file and is listed under FCC Registration No.: 382179. The test site has been approved by the FCC for public use and is listed in the FCC Public Access Link (PAL) database. FCC Part15.249 Page 3 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 Additionally, Bay Area Compliance Laboratories Corp. (Shenzhen) is an ISO/IEC 17025 accredited laboratory, and is accredited by National Voluntary Laboratory Accredited Program (Lab Code 200707-0). The current scope of accreditations can be found at http://ts.nist.gov/Standards/scopes/2007070.htm FCC Part15.249 Page 4 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 SYSTEM TEST CONFIGURATION Justification The system was configured for testing in a testing mode. Equipment Modifications No modifications were made to the unit tested. Special Accessories Provided by manufacturer Configuration of Test Setup EUT Test module Block Diagram of Test Setup EUT 1.0 Meter Test module Non-Conductive Table 80 cm above Ground Plane 1.5 Meter FCC Part15.249 Page 5 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 SUMMARY OF TEST RESULTS FCC Rules Description of Test Result §15.203 Antenna Requirement Compliance §15.207(a) Conduction Emissions N/A* §15.209(a) §15.249(a) Radiated Emissions Compliance §15.249(c) §15.249(d)§15.35 Note: N/A* The EUT was powered by battery only. FCC Part15.249 Page 6 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 FCC§15.203 - ANTENNA REQUIREMENT Applicable Standard For intentional device, according to §15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used. Antenna Connector Construction The antenna was build on board and was complied to section 15.203. Result: Compliant. Please refer to the EUT photos. FCC Part15.249 Page 7 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 FCC§15.205(a) §15.209(a) §15.249(a) §15.249(c) §15.249(d) §15.35 - RADIATED EMISSIONS Applicable Standard As per FCC§15.249 (a), except as provided in paragraph (b) of this section, the field strength of emissions from intentional radiators operated within these frequency bands shall comply with the following: Fundamental Field strength of fundamental Field strength of harmonics frequency (millivolts/meter) (microvolts/meter) 902–928 MHz 50 500 2400–2483.5 MHz 50 500 5725–5875 MHz 50 500 24.0–24.25 GHz 250 2500 As per FCC§15.249 (c), Field strength limits are specified at a distance of 3 meters. (d) Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits in §15.209, whichever is the lesser attenuation. Measurement Uncertainty All measurements involve certain levels of uncertainties, especially in field of EMC. The factors contributing to uncertainties are spectrum analyzer, cable loss, antenna factor calibration, antenna directivity, antenna factor variation with height, antenna phase center variation, antenna factor frequency interpolation, measurement distance variation, site imperfections, mismatch (average), and system repeatability. Based on NIS 81, The Treatment of Uncertainty in EMC Measurements, the best estimate of the uncertainty of a radiation emissions measurement at Bay Area Compliance Laboratories Corp. (Shenzhen) is 4.0 dB. Test Equipment Setup The spectrum analyzer or receiver is set as: Below 1000 MHz: RBW = 100 kHz / VBW = 300 kHz / Sweep = Auto Above 1000 MHz: Peak: RBW = 1MHz / VBW = 1MHz / Sweep = Auto Average: RBW = 1MHz / VBW = 10Hz / Sweep = Auto FCC Part15.249 Page 8 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 EUT Setup Below 1 GHz: Above 1 GHz: The radiated emission and out of band emission tests were performed in the 3 meters, using the setup accordance with the ANSI C63.4-2003. The specification used was the FCC 15.209 and FCC 15.249 limits. Test Procedure For the radiated emissions test Maximizing procedure was performed on the highest emissions to ensure that the EUT complied with all installation combinations. The EUT is set 3 meter away from the testing antenna, which is varied from 1-4 mete, and the EUT is placed on a turntable, which is 0.8 meter above ground plane, the table shall be rotated for 360 degrees to find out the highest emission. The receiving antenna should be changed the polarization both of horizontal and vertical. FCC Part15.249 Page 9 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 Corrected Amplitude & Margin Calculation The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Loss, and subtracting the Amplifier Gain from the Meter Reading. The basic equation is as follows: Corrected Amplitude = Meter Reading + Antenna Factor + Cable Loss - Amplifier Gain The “Margin” column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of 7dB means the emission is 7dB below the limit. The equation for margin calculation is as follows: Margin = Limit – Corrected Amplitude Test Equipment List and Details Serial Calibration Calibration Manufacturer Description Model Number Date Due Date HP Amplifier 8447E 1937A01046 2011-08-02 2012-08-01 Rohde & Schwarz EMI Test Receiver ESCI 100035 2011-11-11 2012-11-10 Sunol Sciences Broadband Antenna JB1 A040904-1 2011-07-05 2012-07-05 Mini-cicuits Amplifier ZVA-213+ T-E27H 2011-03-08 2012-03-07 Sunol Sciences Horn Antenna DRH-118 A052604 2011-05-05 2012-05-04 The Electro- Horn Antenna 3116 9510-2270 2011-05-05 2012-05-04 Mechanics Co. Rohde & Schwarz Signal Analyzer FSIQ 26 609358 2011-07-08 2012-07-07 * Statement of Traceability: Bay Area Compliance Laboratories Corp. (Shenzhen) attests that all calibrations have been performed in accordance to NVLAP requirements, traceable to the NIST. Test Results Summary According to the data in the following table, the EUT complied with the FCC Part 15.209 /15.205/15.249, with the worst margin reading of: 4.90 dB at 4844 MHz in the Horizontal polarization Test Data Environmental Conditions Temperature: 25 °C Relative Humidity: 56% ATM Pressure: 100.0 kPa The testing was performed by Allan An on 2011-12-09. Test Mode: Transmitting FCC Part15.249 Page 10 of 11

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: RSZ110921006-00 30MHz~25GHz Radiated Emission: Indicated Antenna Correction Factor FCC 15.249/15.205/15.209 Table Detector Receiver Angle Ant. Cable Pre-Amp. Cord. Frequency (PK/Ave.) Height Polar Limit Margin Reading Degree Factor Loss Gain Amp. Comment (MHz) (m) (H/V) (dBµV/m) (dB) (dBµV) (dB/m) (dB) (dB) (dBµV/m) 2422 85.21 PK 175 1.6 V 30.3 3.03 27.54 91.00 114 23.00 Fund. 2422 83.65 PK 0 1.5 H 30.9 3.03 27.54 90.04 114 23.96 Fund. 2422 78.13 Ave. 175 1.6 V 30.3 3.03 27.54 83.92 94 10.08 Fund. 2422 77.78 Ave. 0 1.5 H 30.9 3.03 27.54 84.17 94 9.83 Fund. 4844 36.01 Ave. 178 1.5 H 36.3 4.3 27.51 49.10 54 4.90 harmonic 4844 37.12 Ave. 154 1.5 V 35 4.3 27.51 48.91 54 5.09 harmonic 4844 46.46 PK 178 1.5 H 36.3 4.3 27.51 59.55 74 14.45 harmonic 4844 47.29 PK 154 1.5 V 35 4.3 27.51 59.08 74 14.92 harmonic 2495.5 19.48 Ave. 185 2.3 H 31 3.05 27.54 25.99 54 28.01 Spurious 2399.9 19.58 Ave. 360 2.2 H 30.9 3.03 27.54 25.97 54 28.03 Spurious 2485.4 19.65 Ave. 15 2 V 30.5 3.05 27.54 25.66 54 28.34 Spurious 2395.8 19.86 Ave. 145 1.8 V 30.3 3.03 27.54 25.65 54 28.35 Spurious 2395.8 38.95 PK 145 1.8 V 30.3 3.03 27.54 44.74 74 29.26 Spurious 2485.4 38.01 PK 15 2 V 30.5 3.05 27.54 44.02 74 29.98 Spurious 2399.9 36.54 PK 360 2.2 H 30.9 3.03 27.54 42.93 74 31.07 Spurious 2495.5 33.55 PK 185 2.3 H 31.0 3.05 27.54 40.06 74 33.94 Spurious Note: The other data which below the limit 20 dB was not recorded. ***** END OF REPORT ***** FCC Part15.249 Page 11 of 11


Document Created: 2011-12-09 10:19:00
Document Modified: 2011-12-09 10:19:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC