Limited Modular Approval Request Letter

FCC ID: Z33-CA4

Cover Letter(s)

Download: PDF
FCCID_1599582

Serene Innovations, Inc.
14731 Carmenita Road, Norwalk, CA, USA
Tel:(562) 407 5400      Fax: (562) 483 2087

           Limited Modular Approval request Letter
To Whom It May Concern:

We, Serene Innovation, Inc., hereby request limited modular approval for our CA4 Transceiver
module (Model Name:CA4 / FCC ID: Z33—CA4)
This module complies with the Limited modular approval basic requirements in FCC Part 15
Subpart C Section 15.212 and clearly explained below:
1, Have its own RF shielding: The shielding of the radio portion can be demonstrated in EXHIBIT B External
Photo.

2, The modular transmitter have buffered modulation/data inputs, Buffered data inputs stage has been
integrated in chip NRF24LO1 by Nordic Semiconductor.

3, The modular transmitter don‘t have its own power supply regulation, The modular transmitter is to be part
of a host device and complies with the applicable certification requirements. The power supply regulation is
part of the host device and is in all host devices, technical identically. The module will only be implemented in
host devices by the manufacturer!

4, Comply with the antenna requirements of Section 15.203 and 15.204(c), the module has a unique antenna.
This antenna is an etched antenna pattern on the printed circuit board module. It can not be changed by
production staff or end—user.

5, Tested in a stand—alone configuration, the modular transmitter has been performed the testing as a stand
alone and then confirmed the compliance.

6, Equiped with either a permanently affixed label or must be capable of electronically displaying its FCC
Identification number. FCC ID is shown on the label and permanently affixed to this modular transmitter,
please refer to the label drawing.

7, Comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and
the manufacturer must provide adequate instructions along with the module to explain any such requirements.
The necessary explanation to be complied with this requirement is contained in the use manual, and please
refers to the Use manual.

8, Comp%ith any applica!             F exposure requirements in its final configuration.




/
 ft Lee               ze             OR

Vice—President



Document Created: 2011-12-07 17:22:22
Document Modified: 2011-12-07 17:22:22

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC