Quick Installation Guide

FCC ID: YZZGSC3510

Users Manual

Download: PDF
FCCID_4350940

Grandstream Networks, Inc. 126 Brookline Ave, 3rd Floor Boston, MA 02215. USA Tel : +1 (617) 566 - 9300 Fax: +1 (617) 249 - 1987 www.grandstream.com GSC3510 In all EU member states, operation of 5150 - 5350 MHz is restricted to indoor use only. SIP Two-Way Intercom Speaker For Warranty and RMA information, please visit www.grandstream.com Quick Installation Guide

EN OVERVIEW The GSC3510 is not pre-configured to support or GSC3510 is a two-way, full-duplex SIP intercom speaker featuring one 100Mbps make emergency calls to any type of hospital, Ethernet port with PoE/PoE+, integrated dual-band 2.4G/5G Wi-Fi, integrated law enforcement agency, medical care unit Bluetooth, 3 directional microphones with Multichannel Microphone Array De- sign (MMAD), high fidelity 8W speaker and a multi-purpose input port support- (“Emergency Service(s)”) or any other kind of ing a wide range of peripherals. The state-of-art microphone array and Hi-Fi Emergency Service. You must make additional speaker deliver full-duplex and full-band audio with pickup distance up to 4.2 arrangements to access Emergency Services. It meters. The built-in whitelist and blacklist features enables easy filtering of un- wanted calls from the Internet. Its modern industrial design and rich features is your responsibility to purchase SIP-compliant make it ideal for classrooms, hospitals, apartments, dormitories and much more. Internet telephone service, properly configure the GSC3510 to use that service, and periodical- PRECAUTIONS ly test your configuration to confirm that it works • Do not attempt to open, disassemble, or modify the device. as you expect. It is also your responsibility to pur- • Do not expose this device to temperatures outside range of 0 °C to 40 °C in op- eration and -10 °C to 60 °C in storage. chase traditional wireless or landline telephone • Do not expose the GSC3510 to environments outside of the following humidity services to access Emergency Services. range: 10-90% RH (non-condensing). • Do not power cycle your GSC3510 during system boot up or firmware upgrade. GRANDSTREAM DOES NOT PROVIDE CON- You may corrupt firmware images and cause the unit to malfunction. NECTIONS TO EMERGENCY SERVICES VIA THE PACKAGE CONTENTS GSC3510. NEITHER GRANDSTREAM NOR ITS OF- FICES, EMPLOYEES OR AFFILIATES MAY BE HELD LI- ABLE FOR ANY CLAIM, DAMAGE, OR LOSS, AND YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR CAUSES OF ACTION ARISING FROM OR RE- LATING TO YOUR INABILITY TO USE THE GSC3510 GSC3510 Metal Bracket Plastic Bracket TO CONTACT EMERGENCY SERVICES, AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGEMENTS TO ACCESS EMERGENCY SERVICES IN ACCOR- 3x Screw (PA 3.5 x 20) 3x M3 NUT 3x Plastic Expansion Bolt DANCE WITH THE IMMEDIATELY PRECEDING PARAGRAPH. 1x Quick Installation Guide 3x Screw (PM 3 x 50) 1x GPL Statement ~1~ ~2~

GSC3510 PORTS Ceiling Mount 1. Put the ceiling mounting (metal bracket) in the ceiling’s center and mark the posi- tion of the three screw holes. 2. Drill a round hole with a diameter of 18mm for Ethernet cable. The distance 35mm between its center and the highlighted 1, 2 Port Description hole on the plastic bracket should be Reset Factory reset button. Press for 10 seconds to reset factory 35mm. default settings. M3 nut 3. Fix the plastic and metal brackets on the Plastic NET/PoE Ethernet RJ45 port (10/100Mbps) supporting PoE/PoE+. bracket ceiling with flat-head screws and lock- 2-Pin port 2-pin multi-purpose input port.(switch action) nuts.Then place an Ethernet cable pass through the 18mm-round hole. HARDWARE INSTALLATION 4. Align the position line on device’s back cover with the positioning slot. Metal GSC3510 can be mounted on the wall or ceiling. Please refer to the following bracket steps for the appropriate installation. M3.0x50 5. Rotate the device clockwise untill it is locked on the right postion. 3 screw Wall Mount 1. Locate the equipment holder on the desired po- Positionining sition with arrow up. Drill three holes on the wall slot referring to the positions of holes on the metal Lock bracket. 1 2. Fix the metal bracket on the wall by expansion 5 4 screws. 3. Align the position line on device’s back cover POWERING AND CONNECTING THE GSC3510 with the positioning slot. GSC3510 can be powered on using PoE/PoE+ switch or PoE injector using 4. Rotate the device clockwise untill it is locked on following steps: the right postion. - Step 1: Plug a RJ45 Ethernet cable into the network port of the GSC3510. 2 - Step 2: Plug the other end into the power over Ethernet (PoE) switch or PoE injector. Lock Network Port Positionining slot RJ45 Ethernet Cable to Power over Eth- 4 3 ernet (PoE) Switch or PoE injector. ~3~ ~4~

ACCESSING THE CONFIGURATION INTERFACE A computer connected to the same network as the GSC3510 can discover and FCC Caution: access its configuration interface using its MAC address : 1. Locate the MAC address on the MAC tag of the unit, which is on the underside of the device, or on the package. 2. From a computer connected to same network as the GSC3510, type in the fol- lowing address using the GSC3510’s MAC address on your browser: https://gsc_<mac>.local Example: if a GSC3510 has the MAC address 00:0B:82:11:22:33, this unit can be accessed by typing https://gsc_000b82112233.local on the browser. For more information, please download the GSC3510 User Manual from: http://www.grandstream.com/support ~5~ ~6~


Document Created: 2019-07-10 20:02:02
Document Modified: 2019-07-10 20:02:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC