User Manual

FCC ID: YZP-REBETZC5E

Users Manual

Download: PDF
FCCID_4213508

LGIT Confidential and Proprietary 10. User Quick Manual 10.1. Tag Information Symbol Mode Function Image Deep Sleep Initial Mode Connected to Connected Gateway Disconnected to Disconnected Gateway Low Battery Battery Discharged Ready to image Busy download [Notice] * In this status of low battery, we can not ensure any normal operations. * After change battery, the tag’s display will be changed to normal status within next keep alive interval 17 / 25

LGIT Confidential and Proprietary 10.2. Description & Key Function Remote control device provides customer with several functions as below - Waking Tag up from sleep mode - Updating new purchase image on Tag - Deleting purchase image on Tag - Returning a Tag to be factory settings Registration Delete Next Keep Alive (a) function (b) Contact direction A remote controller or a NFC Device contact point for communication. < Remote control device> 10.2.2. Button Function Two buttons provide customer with several functions as below - Waking Tag up from sleep mode - Updating new purchase image on Tag - Changing purchase image on Tag Registration Next Image Keep Alive < Button Function> 18 / 25

Regulation Information Trade name: Manufacturer: LG Innotek Co., Ltd. (Jangduk-dong) 26, Hanamsandan 5beon-ro, Gwangsan-gu, Gwangju, 62229, Korea Model name: REBE-TZC5E Operating frequency: 2405 MHz ~ 2480 MHz for Zigbee, 13.56 MHz for NFC (Receiving only) Maximum transmit power: 10 dBm for Zigbee Can be contacted via website: www.lginnotek.com FCC Compliance Statement (for products subject to Part 15) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment. This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirement. CE RF Radiation Exposure Statement Caution: This equipment complies with European RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. EU Representative LG Innotek Co., Ltd. Am Limespark 2 (Innovapark) 65843 Sulzbach am Taunus, Germany

@ LG Innotek : 4%|0| 46 (4) +s 3 247]7|(AASloje|SAAAte 2417121]) 4 : REBE—TZC5SE at 3! A1232} : lx|o| t6i ( 3/ 33 3:41180 4€ E7 4 : R—C—LGW—REBE—TZCSE Z2A AQF : IEEE 802.15.4 (Zigbee) — AroT 4 : 2402 MHz ~ 2480 MHz (Zigbee), 13.56 MHz (NFC) —Al34 : 16 71 — 34 : 10 mW/MHz O|6f E "lHle 54¥°184#51014 C246 20 an O|4 At8— 6t2| &#+ O 4& SAR 4| C ¥27IAHE£ 2izsto| San AlgiStI o 2 o 2l?i2e (B8)t 2P 17|24 x2 If¥OlA 4g5z 8 #x02 5t91, 2E 4149}[4 8 &


Document Created: 2019-03-05 20:22:15
Document Modified: 2019-03-05 20:22:15
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC