Modular Approval Request

FCC ID: YZP-BH1000

Cover Letter(s)

Download: PDF
FCCID_2697286

                                                            LG Innotek Co., Ltd.
                                            978-1, Jangduk-dong, Gwangsan-gu, Gwangju-City, 506-731, Korea


UL Verification Services Inc.                                                                                    July 3 2015
47173 Benicia Street
Fremont, CA 94538, USA

                                     Modular Approval Request Letter
                                         Applicant: LG Innotek Co., Ltd.
                                              FCC ID: YZP-BH1000
 No.                         FCC requirements
             Have its own RF shielding                       RF Block shielded by Metal Case.
   1
             Have buffered modulation/data inputs            Yes, the module has buffered data input.
   2         (if such inputs are provided),
             The modular transmitter must have its own power We used self own power supply regulation.
   3         supply regulation.
             Meet the antenna requirements of section 15.203 Not applicable to licensed transmitters.
   4
             Be tested in a stand-alone configuration, i.e., the Yes, the EUT (module) was tested a stand alone
             antenna, AC or DC power and data input/output lines configuration.
   5         must be connected to the module but, the module
             must not be inside another case during testing
             Be labeled with its own FCC ID number, and if the         The FCC ID label format is placed on the module.
             FCC ID is not visible when the module is installed        If FCC ID label is not visible when module is install
   6         inside another device, then the outside of the device     into the system, “Contains FCC ID: YZP-BH1000”
             into which the module is installed must also display a    shall be placed on the outside of final product.
             label referring to the enclosed module.
             The modular transmitter is manufactured so that the       It complies with specific rules or operating
             user can not influence the operation of the transmitter   requirements. And instruction is included User
   7         that will operate outside of the scope of the             manual.
             regulations.
             Address compliance with the Commission`s RF The exposure condition of this module is compliant
   8         exposure limits in Sections 1.1310 and 2.1093. with the requirements.




Sincerely,




        Jeong Inchang
Senior Research Engineer



Document Created: 2015-07-07 15:30:29
Document Modified: 2015-07-07 15:30:29

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC