RF Exposure Info 6

FCC ID: YY3-01120709267

RF Exposure Info

Download: PDF
FCCID_1464517

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client BV—ADT (Auden) Certificate No: D1900V2—5d036_Feb10 [CALIBRATION CERTIFICATE Object D1900V2 — SN: 5d036 Calibration procedure(s) QA CAL—05.v7 Calibration procedure for dipole validation kits Calibration date: February 23, 2010 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 06—Oct—09 (No. 217—01086) Oct—10 Power sensor HP 8481A US37292783 06—Oct—09 (No. 217—01086) Oct—10 Reference 20 dB Attenuator SN: 5086 (20g) 31—Mar—09 (No. 217—01025) Mar—10 Type—N mismatch combination SN: 5047.2 / 06327 31—Mar—09 (No. 217—01029) Mar—10 Reference Probe ES3DV3 SN: 3205 26—Jun—09 (No. ES3—3205_Jun09) Jun—10 DAE4 SN: 601 07—Mar—09 (No. DAE4—601_Mar09) Mar—10 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—09) In house check: Oct—11 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8753E US37390585 $4206 18—Oct—01 (in house check Oct—09) In house check: Oct—10 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician 7 Approved by: KatJa Pokovic Technical Manager {RELVHL Issued: February 24, 2010 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: D1900V2—5d036_Feb10 Page 1 of 9

Calibration ‘ Laboratory of atlly, \\\\t/&/? S Schweizerischer Kalibrierdienst Schmid & Partner flac\f:—fi’ 2 c Service suisse d‘étalonnage Engineering 9 9 AG PPind 2ME Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland "/,,///\\\\\\\\ S Swiss Calibration Service thilabs® Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D1900V2—50036_Feb10 Page 2 of 9

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V5.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V5.0 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 1900 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.0 1.40 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 39.1 £ 6 % 142 mho/m * 6 % Head TSL temperature during test (21.6 £ 0.2) °C ~——— ———— SAR result with Head TSL SAR averaged over 1 cm* (1 g) of Head TSL Condition SAR measured 250 mW input power 10.0 mW / g SAR normalized normalized to 1W 40.0 mW /g SAR for nominal Head TSL parameters normalized to 1W 39.5 mW ig + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 5.21 mW /g SAR normalized normalized to 1W 20.8 mW / g SAR for nominal Head TSL parameters normalized to 1W 20.7 mW ig £ 16.5 % (k=2) Certificate No: D1900V2—5d036_Feb10 Page 3 of 9

Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.3 1.52 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 52.5 £ 6 % 1.56 mho/m * 6 % Body TSL temperature during test (21.6 £ 0.2) °C ——— w« SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 10.3 mW /g SAR normalized normalized to 1W 41.2 mW / g SAR for nominal Body TSL parameters normalized to 1W 40.5 mW / g £ 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.42 mW /g SAR normalized normalized to 1W 21.7 mW /g SAR for nominal Body TSL parameters normalized to 1W 21.5 mW / g £ 16.5 % (k=2) Certificate No: D1900V2—5d036_Feb10 Page 4 of 9

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 52.6 O + 4.8 jQ Return Loss —25.5 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 46.3 0 + 6.5 jQ Return Loss —22.2 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.196 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on May 08, 2003 Certificate No: D1900V2—50036_Feb10 Page 5 of 9

DASY5 Validation Report for Head TSL Date/Time: 23.02.32010 13:03:57 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN:50036 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1:1 Medium: HSL U11 BB Medium parameters used: £f = 1900 MHz; 0 = 1.42 mho/m:;& = 39.2; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: Probe: ES3DV3 — SN3205; ConvF(5.09, 5.09, 5.09); Calibrated: 26.06.2009 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 07.03.2009 Phantom: Flat Phantom 5.0 (front); Type: QDO0OP50AA; Serial: 1001 Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Pin=250 mW /d=10mm, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value =97.5 V/m; Power Drift = 0.035 dB Peak SAR (extrapolated) = 18.4 W/kg SAR(I g) = 10 mW/g; SAR(10 g) = 5.21 mW/g Maximum value of SAR (measured) = 12.6 mW/g 20 0 dB = 12.6mW/g Certificate No: D1900V2—5d036_Feb10 Page 6 of 9

Impedance Measurement Plot for Head TSL 23 Feb 2010 10:35:09 S11 1 U FS 2 52.631 0 4.8105 a 402.96 pH 1 900.000 000 MHz * CH1 Markers Ded 1145.113 o ~15.943 a Cor 1.80000 6Hz Av §6° t CH2 CH2 Markers 11—15.245 dB Cor 1.80000 6Hz Av 16° + START 1 600.000 000 MHz STOP 2 100.000 000 MHz Certificate No: D1900V2—50036_Feb10 Page 7 of 9

DASY5 Validation Report for Body Date/Time: 16.02.2010 12:44:13 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 — SN:50036 Communication System: CW; Frequency: 1900 MHz; Duty Cycle: 1: 1 Medium: MSL U10 BB Medium parameters used: £ = 1900 MHz; 0 = 1.56 mho/m:; &, = 52.7; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.59, 4.59, 4.59); Calibrated: 26.06.2009 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 07.03.2009 Phantom: Flat Phantom 5.0 (back); Type: QDOOOPS0OAA: Serial: 1002 Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Pin250 mW /d=10mm, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=S5mm Reference Value = 97.4 V/m; Power Drift = 0.00629 dB Peak SAR (extrapolated) = 17.6 W/kg SAR(I g) = 10.3 mW/g; SAR(10 g) = 5.42 mW/g Maximum value of SAR (measured) =13.1 mW/g 16 —20 0 dB = 13.1mW/g Certificate No: D1900V2—5d036_Feb10 Page 8 of 9

Impedance Measurement Plot for Body TSL 16 Feb 2010 10:41:56 CHIp sii 4 uors 2: 46.293 a 6.5312 4 547.10 pH 1 900.000 008 MHz x CH1 Markers Bed 41424124 a ~15.998 a ter 1.80000 GHz fAvg 16 4 cH2 CH2 Markers 11—14.435 dB Cor 1.90000 GHz Av 16° + START 1 600.000 000 MHz STOP 2 100.000 000 MHz Certificate No: D1900V2—5d036_Feb10 Page 9 of 9

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration certificates Client BV—ADT (Auden) Certificate No: D2450V2—737_Feb10 CALIBRATION CERTIFICATE Object D2450V2 — SN: 737 Calibration procedure(s) QA CAL—O5.v7 Calibration procedure for dipole validation kits Calibration date: February 19, 2010 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 06—Oct—09 (No. 217—01088) Oct—10 Power sensor HP 8481A US37202783 06—Oct—09 (No. 217—01086) Oct—10 Reference 20 dB Attenuator SN: 5086 (209) 31—Mar—09 (No. 217—01025) Mar—10 Type—N mismatch combination SN: 5047.2 / 06327 31—Mar—09 (No. 217—01029) Mar—10 Reference Probe ES3DV3 SN: 3205 26—Jun—09 (No. ES3—3205_Jun09) Jun—10 DAE4 SN: 601 07—Mar—09 (No. DAE4—601_Mar09) Mar—10 Secondary Standards ID # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—09) In house check: Oct—11 RF generator R&S SMT—06 100005 4—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8753E US37390585 $4206 18—O0ct—01 (in house check Oct—09) In house check: Oct—10 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician (47 Approved by: KatJa Pokovic Technical Manager Issued: February 22, 2010 This calibration certificate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: D2450V2—737_Feb10 Page 1 of 9

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x,y.z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET}, "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. e SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. «_ SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D2450V2—737_Feb10 Page 2 of 9

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY5 V5.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom V4.9 Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz # 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 £ 0.2) °C 38.5 £ 6 % 1.76 mho/m # 6 % Head TSL temperature during test (21.0 £0.2) °C a<— SAR result with Head TSL SAR averaged over 1 cm‘ (1 g) of Head TSL Condition SAR measured 250 mW input power 13.5 mW /g SAR normalized normalized to 1W 54.0 mW /g SAR for nominal Head TSL parameters normalized to 1W 54.3 mW /g £ 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.30 mW /g SAR normalized normalized to 1W 25.2 mW /g SAR for nominal Head TSL parameters normalized to 1W 25.2 mW ig £ 16.5 % (k=2) Certificate No: D2450V2—737_Feb10 Page 3 of 9

Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C §1.7 +6 % 2.00 mho/m * 6 % Body TSL temperature during test (21.2 + 0.2) °C m~~ ~~~ SAR result with Body TSL SAR averaged over 1 cm* (1 g) of Body TSL Condition SAR measured 250 mW input power 13.1 mW /g SAR normalized normalized to 1W 52.4 mW 1 g SAR for nominal Body TSL parameters normalized to 1W 51.5 mW / g £ 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 5.98 mW /g SAR normalized normalized to 1W 23.9 mW /g SAR for nominal Body TSL parameters normalized to 1W 23.7 mW / g # 16.5 % (k=2) Certificate No: D2450V2—737_Feb10 Page 4 of 9

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 54.0 0 + 4.0 jQ Return Loss —25.4 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 48.9 O + 5.8 jQ Return Loss —24.5 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.162 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on August 26, 2003 Certificate No: D2450V2—737_Feb10 Page 5 of 9

DASY5 Validation Report for Head TSL Date/Time: 17.02.2010 13:34:22 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:737 Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1: 1 Medium: HSL U11 BB Medium parameters used: £= 2450 MHz; 0 = 1.77 mho/m; & = 38.7; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY3 (IEEE/IEC/ANSI C€63.19—2007) DASY5 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.53, 4.53, 4.53); Calibrated: 26.06.2009 e Sensor—Surface: 3mm (Mechanical Surface Detection) © Electronics: DAE4 Sn601; Calibrated: 07.03.2009 © Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 © Measurement SW: DASY5, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Head/d=10mm, Pin=250 mW, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 102.8 V/m; Power Drift = 0.031 dB Peak SAR (extrapolated) =27.5 W/kg SAR(1 g) = 13.5 mW/g; SAR(10 g) = 6.3 mW/g Maximum value of SAR (measured) = 17.5 mW/g 13.2 A1.6 22 0 dB = 17.53mW/g Certificate No: D2450V2—737_Feb10 Page 6 of 9

Impedance Measurement Plot for Head TSL 17 Feb 2010 10:32:18 (CHI) sii 4 U Fs 2 53.951 0 3.9863 0 259.96 pH 2 450.000 000 MHz Del Cor fAvg 16 CH2 Cor Av 16° START 2 100.000 000 MHz STOP 2 600.000 000 MHz Certificate No: D2450V2—737_Feb10 Page 7 of 9

DASY5 Validation Report for Body Date/Time: 19.02.2010 13:22:20 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN:737 Communication System: CW; Frequency: 2450 MHz; Duty Cycle: 1: 1 Medium: MSL U1O BB Medium parameters used: £= 2450 MHz; 0 =2.01 mho/m; & = 51.8; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASYS (IEEE/IEC/ANSI €63.19—2007) DASY5 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.31, 4.31, 4.31); Calibrated: 26.06.2009 © Sensor—Surface: 3mm (Mechanical Surface Detection) e Electronics: DAE4 Sn601; Calibrated: 07.03.2009 © Phantom: Flat Phantom 5.0 (back); Type: QDO0OP50AA; Serial: 1002 * Measurement SW: DASYS, V5.2 Build 157; SEMCAD X Version 14.0 Build 57 Body/d=10mm, Pin250 mW, dist=3.0mm (ES—Probe)/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 95.3 V/m; Power Drift = 0.014 dB Peak SAR (extrapolated) = 29.8 W/kg SAR(I g) = 13.1 mW/g; SAR(10 g) = 5.98 mW/g Maximum value of SAR (measured) = 17.3 mW/g 0 dB = 17.3mW/g Certificate No: D2450V2—737_Feb10 Page 8 of 9

Impedance Measurement Plot for Body TSL 19 Feb 2010 @9:38:%Se (CHI) s11 1 U FS 2: 48.865 a 5.7773 4 375.30 pH 2 450.000 000 MHz o Oe l Ca five 16 CH2 Ca Av 16" START 2 250.000 900 MHz STOP 2 650.000 000 MHz Certificate No: D2450V2—737_Feb10 Page 9 of 9


Document Created: 2011-02-18 15:36:34
Document Modified: 2011-02-18 15:36:34
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC