manual

FCC ID: YWOELECOM3

Users Manual

Download: PDF
FCCID_1669851

M-IR05DR Wireless Optical Mouse User's Guide

Introduction Congratulations on your purchase of the most innovative wireless mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse 2 * AAA batteries can track reliably even on tricky polished or wood-grain surfaces. It offers even more Battery compartment cover advance that will make you more productive and more comfortable. Features 2.4GHz (distance 6~8m), 34 Channels/224 ID Using state-of-art technology. High tracking speed and sensitivity. A wrong battery placement may cause batteries overheat. Nano receiver. Longer battery life. Auto-Link, Plug and Play! No need to set the channel ID. The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any Power on/off switch. button of the mouse" is compulsory to wake it up. Ergonomic design. Power on/off: There is a Power on/off switch designed to save the batteries power while non-usage of a longer period. 800/1600 dpi switchable.(continue to press the right and middle button at the same time User can push DPI button to change the resolution. The LED on top case will be flashed when dpi has been in 3 seconds to change dpi) sucessfully swithced. 2*AAA Alkaline batteries included. Pull out the receiver Mouse Internet Forward & Backward button 2. Connect the receiver a. Turn on your PC. b. Connect the receivere to USB port on PC. Wheel button Low power indicator Receiver ID reset button Battery cover Power on/off switch Receiver PC USB port A. Hardware Installation 1. Insert the batteries 3. Communication : The mouse & the receiver a. Remove the battery compartment cover on the bottom case of the mouse. The 2.4Ghz RF mouse features a dual-way transmission technology which enables the b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet. mouse and the receiver auto-communication. c. Close the battery compartment cover properly. d. Make sure the Power on-off swich on the bottom of the mouse is ON. A. Auto-link mode e. The Low Power LED on the top case will blink 3 seconds if the mouse power is on. 1. Make sure the Power On-Off Switch on the bottom of the mouse is ON. 2. Operate the mouse, and cursor's movement is mapping mouse movement. Now the mouse and the receiver is auto-linked successfully.

B. Manual mode FCC statement If you find the communication channel does not connect well, you can use the software This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to connection tool to re-connect the mouse & receiver to reset a new channel ID. You are Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful able to download the software from your local brand vendor's website. interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there 1 2 3 is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: ID links OK! ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Execute ID connection software Press ID reset button To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example-use only shielded interface cables when connecting to computer or peripheral devices). Note This device complies with Part 15 of the FCC Rules. Operation is subject to the following two While the mouse is working, if encountering any interference, the mouse and the receiver will conditions: automatically source out and transfer to another free channel. During the transferring, the (1) This device may not cause harmful interference. and cursor movement may have a second delay. (2) This device must accept any interference received, including interference that may cause undesired operation. 4. Replace the new batteries This symbol on the product or in the instructions means that your electrical and electronic equipment should Please replace a pair of new batteries and follow the previous instructions. (2, 3) be disposed at the end its life separately from your household waste. There are sparate collection system for recycling in the EU. For more information, please contact the local authority or your retailer where you purchased the product. Note The red LED on the scroll wheel is the low batteries power indicator. It indicates that batteries inside the mouse are needed to be replaced. ◎ Trouble Shooting a. Make sure you have connected the receiver correctly to the computer's USB port. b. For the best performance, we suggest you to locate the receiver with a distance from other electrical devices, such as the computer, the computer monitor or external storage drives. c. Make sure you have set the communication between the receiver and the mouse. Refer to the Communication :The mouse and the receiver d. If you find the communication channel does not connect well. You can use the software connection tool to re-connect the mouse & receiver to reset a new channel ID. You are able to get the software from the included diskette of the package or download from your local brand vendor's website. e. Some system devices might conflict with the mouse. Confirm the IRQ/address settings of these devices for conflicts, and change the settings as required. f. Make sure that you are not working the mouse on glossy or reflective surfaces. ◎ Battery use reminders 1. Remove worn-out batteries from equipment immediately and dispose of promptly. 2. Keep all batteries (used or new) out of the reach of children. 3. To have the batteries with a regular check and replace new batteries if not used for a long time. 4. Never dispose of batteries in fire, as they could explode. 5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture. 6. Do not mix different types of batteries (e.g. Ni MH, NiCd, alkaline, and etc) in the mouse. 7. Remove batteries from the electrical device if the device is not going to be used for a long time. 8. If the performance of the batteries decreases substantially, it is time to replace the batteries.


Document Created: 2012-02-08 14:13:50
Document Modified: 2012-02-08 14:13:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC