RF exposure report

FCC ID: YWO-M-XPT1MR

RF Exposure Info

Download: PDF
FCCID_3859490

Product Name：ELECOM TrackBall Mouse Model Number: M‐XPT1MR; M‐XPT1MRX FCC ID: YWO‐M‐XPT1MR RADIO FRREQUENCY EXPOSURE COMPLIANCE RESULT : Test Standard : FCC KDB Publication 447498 D01 V06 Clause 4.3.1, The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune‐up tolerance, mW)/(min. test separation distance, mm)] ∙ [√f(GHz)] ≤ 3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR, where ‧ f(GHz) is the RF channel transmit frequency in GHz ‧ Power and distance are rounded to the nearest mW and mm before calculation ‧ The result is rounded to one decimal place for comparison ‧ 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. According to the actual measurement, max. power of channel, including tune‐up tolerance =0.49261mW min. test separation distance= 5mm √f(GHz)=1.55 The test result is 0.15271≤3.0 for 1‐g SAR≤ 7.5 for 10‐g SAR, hence the EUT is excluded from SAR evaluation according to FCC KDB Publication 447498 D01: General RF Exposure Guidance V06.


Document Created: 2018-05-21 19:31:31
Document Modified: 2018-05-21 19:31:31
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC