User Manual

FCC ID: YR8ES825

Users Manual

Download: PDF
FCCID_4321204

eSky wireless Inc. ES825 User Manual V1.1 2019 22-303,328 XINGHUSTREET,SUZHOU,CHINA

Contents Version history .................................................................................................................................. 3 1. ES825 introduction ........................................................................................................................ 5 1.1 ES825 Appearance Introduction.......................................................................................... 5 1.2 ES825 Working Mode Introduction ..................................................................................... 6 1.2.1 1-day-1-report mode ................................................................................................ 6 1.2.2 Deep sleep interval mode ........................................................................................ 6 1.2.3 1-hour SMS check mode .......................................................................................... 7 1.2.4 SMS standby mode................................................................................................... 7 1.2.5 TCP standby mode.................................................................................................... 7 1.2.6 GPS sleep mode........................................................................................................ 7 1.2.7 GPS always on mode ................................................................................................ 7 1.2.8 Vibration mode ........................................................................................................ 7 2. Test Preparation ............................................................................................................................ 8 3. Quick Test Steps ............................................................................................................................ 9 3.1 Normal test.......................................................................................................................... 9 3.1.1 Step1: Insert SIM Card............................................................................................ 10 3.1.2 Step2: Power on ..................................................................................................... 10 3.1.3 Step3: Red and green LED on? ............................................................................... 11 3.1.4 Step4: Green LED Blink slowly or on? (in the open air).......................................... 11 3.1.5 Step5: Set APN ....................................................................................................... 11 3.1.6 Step6: Green LED on? (in the open air) .................................................................. 12 3.1.7 Step7: Check the reason ......................................................................................... 12 3.1.8 Step8: Normal test ................................................................................................. 12 3.2 APP test ............................................................................................................................. 13 3.2.1 Step1: Download and install APP ........................................................................... 14 3.2.2 Step2: Register and login ........................................................................................ 15 3.2.3 Step3: Binding device device .................................................................................. 16 3.2.4 Step4: Check the reason ......................................................................................... 18 3.2.5 Step5: Normal function test ................................................................................... 18 4. Usage presentation ..................................................................................................................... 18

Version history Version Data Note V1.0 2018.11.12 First version V1.1 2018.12.5 Second version

FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

1. ES825 introduction ES825 is a 2G (GPRS)/ 4G (Cat.M1&Cat.NB1) mini waterproof GPS tracker for pet (without voice feature). ES825 use BG96 module and support WIFI positioning, it uses magnet charging method. ES825 for non-portable use only. 1.1 ES825 Appearance Introduction 1. Rubber shell (For pet) 2. LED 3. SOS button 4. Magnet charge 5. Hole 6. SIM card slot 7. Rubber ring

Note: The meaning of each LED means, please check below. LED Resource OFF Fast flash Normal flash Slow flash Steady Color (1s) (3s) (6s) Red Charge Not in / / / In charging charging Green GPS and / GPRS(LTE) GPRS(LTE) not GPRS(LTE) GPRS(LTE) GPRS(LTE) OK lock not lock and GPS GPS not fix GPS fixed GPS not fix both OK 1.2 ES825 Working Mode Introduction *This chapter is under revise, please refer to your contact person. Mode Estimated using time 1-day-1-report mode 7 months Deep sleep interval mode Mode,1,60# 60min interval- 16days 1-hour SMS check mode 40 days SMS standby mode 7 days TCP standby mode 6 days GPS Sleep mode Mode,5,3# 3min interval- 4days GPS always on mode Mode,6,60# 60s interval - 14h Vibration mode Depend on vibration time 1.2.1 1-day-1-report mode This mode has the lowest power consumption. The command likes “Mode,0,8#”, which can be checked by ES825 protocol. After setting the command, the device will wake up at 8AM every day to report. After reporting, it will be power off, and will wake up the next day at 8AM. 1.2.2 Deep sleep interval mode For example: Mode,1,5#, which can be checked by ES825 protocol. After setting the command, the device will wake up every 5 mins to report. After reporting, it will be power off.

1.2.3 1-hour SMS check mode This mode saves a lot of data traffic. After setting this mode, the device will wake up every one hour to check if has SMS command coming but no reporting, if Yes, it will deal with the SMS command, if not, after waiting some time, it will power off. 1.2.4 SMS standby mode This mode also saves data traffic, but it is more real-time. After setting this mode, the device will waiting SMS command at any time, but it will not open GPS, WIFI, TCP and so on, it only check SMS. If has SMS coming, it will deal with it at once. 1.2.5 TCP standby mode This mode is similar with SMS standby. After setting this mode, the device will open TCP all the time, but close all the other activities. Once comes TCP command, the device will deal with it at once. 1.2.6 GPS sleep mode This mode will never power off but will close GPS or WIFI when not reporting. After setting this mode, it will open GPS or WIFI (GPS not fix) for reporting the location. After reporting, it will close GPS or WIFI for saving power, and recalculate the next report round. In this mode, customer can set SMS and TCP command, and the device will deal with them at any time. 1.2.7 GPS always on mode This is real-time tracking mode. It will has the highest power consumption. After setting this mode, the device will open GPS or WIFI all the time for reporting the location, you and check the location on the APP, it will update at any time. 1.2.8 Vibration mode This is an intelligence mode. If the device in static mode, the device is always in sleep mode, and when detect vibration, it will power on automatically and start reporting as the interval setting.

2. Test Preparation Make sure the equipment below are all available. Equipment Lists: Equipment Name Number Note ES825 1 Necessary SIM Card 1 Necessary Mobile phone 1 Necessary( APP) Charging wire 1 Necessary

3. Quick Test Steps 3.1 Normal test Step 1: Insert SIM card (Please check in chapter 3.1.1) Step 2: Power on 1. Please re-do power on. (Please check in chapter 3.1.2) 2. It has the possibility that the battery has run out of power, you can let the device in charge No Step 3: Red and green LED on? first, if the Red LED on, please (Please check in chapter 3.1.3) wait for some time, when fully charged, the red LED will be off, if still no LED on, please contact Yes us. Step 4: Green LED Blink slowly or No on? (in the open air) Make sure ES825 is in the open (Please check in chapter 3.1.4) air, and there are no tall buildings around. If not ok for a very long time, please contact us Yes Step 5: Set APN (Please check in chapter 3.1.5) No Step 6: Green LED on (in the open air) Step 7: Check the reason (Please check in chapter 3.1.6) (Please check in chapter 3.1.7) Yes Step 8: Normal test (Please check in chapter 3.1.8)

3.1.1 Step1: Insert SIM Card First you should take off the rubber ring of ES825 and prepare the Nano SIM Card, like below: Note: This step must be done before power on the ES825. After inserted the SIM Card, you will hear” ka”, it means the SIM Card is inserted OK. 3.1.2 Step2: Power on Please press the SOS button, the device will be powered on.

3.1.3 Step3: Red and green LED on? After power on the ES825, Red and green LED will be on for 1 second, and then green LED will start blinking. 3.1.4 Step4: Green LED Blink slowly or on? (in the open air) Please go to the open air, and wait for some minutes, the Green LED blink slowly(if GPRS or LTE not lock) or on( if GPRS or LTE locked) if GPS fixed. 3.1.5 Step5: Set APN The command to re-set APN is “APN”. The format of “APN” is shown below. Content / Command code Apn Separator , Parameter1 APN Separator , Parameter2 Username Separator , Parameter3 Password End Sign # For example: The APN of China Mobile is CMNET.

So the content of SMS should be: apn,cmnet,,# APN If the SIM card not has username and password, just “,” is OK. 3.1.6 Step6: Green LED on? (in the open air) If the command responses” APN=Success! ”, the green LED will be ON if GPRS or LTE lock. 3.1.7 Step7: Check the reason If Green LED not on, it will has below possibility. 1) APN=Fail!  Make sure no parameters are missed.  Make sure the user name and password of SIM Card. 2) No Response.  Make sure APN/apn spelling correct. No space in the beginning.  Make sure ending character’#’, No space in the end.  Make sure that SIM card has plugged, or plugged in right way.  Make sure SIM supports SMS service. Try to use the SIM card send SMS by your mobile phone.  Make sure GPRS/LTE coverage is good.  If all above are meet but still no response, please contact us. 3.1.8 Step8: Normal test Now you can do your test follow the ES825 protocol.

3.2 APP test Step 1: Download and install APP (Please check in chapter 3.2.1) Step 2: Register and login (Please check in chapter 3.2.2) Step 3: Register device OK No Step 4: Check the reason (Please check in chapter 3.2.3) (Please check in chapter 3.2.4) Yes Step 5: Normal function test (Please check in chapter 3.2.5) (Please check in Lchapter 3.5)

3.2.1 Step1: Download and install APP Please search the key words “etracking” in the app store, and choose the one like below shows, download and install. Open

3.2.2 Step2: Register and login After install the APP, open the APP. Please click “Register” if you need register first, and follow the steps as below:  Please input your e-mail account on the first white blank  Please click the first blue blank and you will receive 4 numbers from your email.  Please input the 4 numbers into second white blank  Please set a password on the third white blank, then click the second blue blank. After register successfully, you will see the login screen as below:

3.2.3 Step3: Binding device device After login, you will see the screen as below: if you want the turn into existing account, please click “ Switch account ” If you do not turn into other account, please continue to bind devices.

You can bind the device by scanning 2 QR code of the device or entering the IMEI of the device . Please click the “ RichScan” or “ Manual input” to bind devices. Then you can see the screen as below: Click “next” and press the SOS button of ES825, and you will enter management interface of the APP. Note: The first account binding the devices is the administrator. Other account need to be permitted by administrator if it want to bind the same device.

3.2.4 Step4: Check the reason If register fail,  Device off line noted, please check if the battery has run out of power, you can let the device in charge for a while and then try again.  Make sure GPRS/LTE signal coverage is good.  If noted “the bind request has been sent to the administrator”, that means the device has been bind, if you make sure it is your first bind, please contact us. The device support bind by not only one mobile phone, if it is not first bind, you just need to contact the person who first bind. 3.2.5 Step5: Normal function test Please choose the suitable device working mode in APP for testing. 4. Usage presentation For pet Note: The frequency for LTE: Band2:1850-1910MHz(TX);1930-1990MHz(RX) Band4:1710-1755MHz(TX);2110-2155MHz(RX) Band5:824-849MHz(TX);869-894MHz(RX) Band12:699-716MHz(TX);729-746MHz(RX) Band13:777-787MHz(TX);746-756MHz(RX) Band26:814-849MHz(TX);859-894MHz(RX) The LTE module FCC ID: XMR201707BG96. The frequency for 2G: GPRS850:824-849MHz(TX);869-894MHz(RX) GPRS1900:1850-1910MHz;1930-1990MHz(RX)


Document Created: 2019-06-18 05:40:06
Document Modified: 2019-06-18 05:40:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC