User manual

FCC ID: YR8ES102

Users Manual

Download: PDF

FCCID_1925493

Suzhou eSkywireless Inc. ES102 user manual

ES102 user manual

Suzhou eSkywireless Inc.

0 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual

Information to User
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

NOTE：This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by relocating the
receiving antenna or consulting the dealer or an experienced radio/TV technician for help.

Mobile RF Warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.

Changes and Modification Warning Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

1 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual

1 PREPARE before INSATLLATION

1.1 Product Display

（image of ES102）

（wire harness of ES102）

1.2 Packaging Inspection

2 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual
Open the box, check the terminal model is correct and the accessories are complete. Otherwise,
please contact your dealer.

1.3 Install SIM Card

1.3.1 Selection of SIM Card
The ES102 is a GPS/GPRS terminal, and it needs a GSM/GPRS SIM card. please reference dealer’s
opinion to select carrier.

1.3.2 Installation SIM card
Open the terminal cover, and put the metal side of SIM card face down and then fasten the card
slot cover.

1.4 Power On
The terminal standard power supply is 6V-34V. the red line is the positive power supply and the
black line is the negative power supply.
Note:
Please select the negative power line grounding alone.

2 Steps of AT Setting before tests
Start hyper-terminal connection as follows.

3 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual

1)select the comm port of PC through which ES102 is connected with PC, as the follows

2) In Port Settings, change communication speed (bits per second) to 115200bps,

3)Final step is the certain AT settings necessary after 1st running of downloaded program.

3.1) Start connection first
3.2) Restart ES102
3.3) After you see the "IIII"as the following picture, start setting.

4 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual

5 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual

3 INSTALL and OPERATION

3.1 Installation Method
The terminal is GPS positioning products, it is recommended that you follow the instructions to
install.
Note:
1) The following installation order, please do not inverted.
2) During the installation process, please do not supply the terminal.
The terminal installation is divided into hidden installation and open installation.
When the terminal is using special vehicles, hidden installation is recommended. Otherwise, open
installation is chosen. (To avoid thieves’ damage, the installation location should be hidden)

(cigarette lighter)

（OBD）

6 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual
① Battery connector
② Power connector, connecting terminal with the power connector of wire harness, as picture
above.
③ I/O connector, connecting terminal with the I/O connector of wire harness, as picture above.
④ I/O lines
⑤ Power lines, it can connect with cigarette lighter or OBD, as picture above.

3.1.1 Open Installation
The power connecting line we selected is provided by original cigarette lighter cord.

3.1.2 Hidden installation
The power connecting line we selected is provided by original the main power core. And the red
line has a fuse box (3A fuse) which can play a short circuit overcurrent protection role.

3.2 Installation Site
The places that we suggest to install:
① The bottom of the front windshield decorative plates
② Around of front dashboard (epidermis as nonmetallic material)
③ Below the decorative panels of rear windshield
④ Inside the front bumper (should pay attention of water)
⑤ Below the wipers plate (should pay attention of water)

7 http://www.eskywireless.com

Suzhou eSkywireless Inc. ES102 user manual
3.3 Installation Notes
① Avoid put together with the emission source, for example, reversing radar, anti-theft devices
and other on-board communications equipment.
② As for fixing the terminal, you can bound with ties or stick with wide sponge strength
double-faced adhesive.
③ The terminal has GSM antenna and GPS antenna，so the installation should ensure that the
ES102face up (that is GPS toward the sky). Besides, there is no on-metallic object that obscures
above the terminal.
④ If your car’s windshield pasted with metal insulation layer or the heating layer, GPS receiving
signal will be weakened, and it may cause GPS work abnormal. So please change the location you
installed the terminal.

8 http://www.eskywireless.com

Document Created: 2012-11-09 05:49:01
Document Modified: 2012-11-09 05:49:01

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC