MPE calculation

FCC ID: YOPGS1011MEPS

RF Exposure Info

Download: PDF
FCCID_1763851

RF EXPOSURE

Standard Applicable
 According to §1.1307(b)(1), systems operating under the provisions of this section shall be
 operated in a manner that ensure that the public is not exposed to radio frequency energy level in
 excess of the Commission’s guideline.


 This is a Mobile device, the MPE is required.


 According to §1.1310 and §2.1093 RF exposure is calculated.


 Limits for Maximum Permissive Exposure (MPE)


Frequency Range         Electric Field      Magnetic Field      Power Density       Averaging Time
     (MHz)             Strength (V/m)       Strength (A/m)         (mW/cm2)            (minute)
                         Limits for General Population/Uncontrolled Exposure
    0.3-1.34                 614                  1.63               *(100)                30
    1.34-30                 824/f                2.19/f             *(180/f2 )             30
    30-300                  27.5                 0.073                 0.2                 30
   300-1500                    /                    /                F/1500                30
  1500-15000                   /                    /                  1.0                 30


F = frequency in MHz
* = Plane-wave equipment power density


MPE Prediction
Prediction of MPE limit at a given distance
Equation from page 18 of OET Bulletin 65, Edition 97-01
S=PG/4πR2
Where: S = Power density
       P = Power input to antenna
       G = Power gain of the antenna in the direction of interest relative to an isotropic radiator
       R = Distance to the center of radiation of the antenna


     Maximum peak output power at antenna input terminal: 21.48                         (dBm)
     Maximum peak output power at antenna input terminal: 140.6047524                    (mW)
                                             Duty cycle: 99                             (%)
                                        Maximum Pav : 139.1987049                        (mW)
                                  Antenna gain (typical): -3.06                         (dBi)
                                Maximum antenna gain: 0.494310687                       (numeric)
                                     Prediction distance: 20                            (cm)
                                   Prediction frequency: 2412                           (MHz)



  MPE limit for uncontrolled exposure at prediction 1                                    (mW/cm2)
  Power density at predication frequency at 20 (cm) 0.0136957                           (mW/cm^2)

  Measurement Result:
  The predicted power density level at 20 cm is            0.136957419 (W/m^2)
  This is below the uncontrolled exposure limit of 1 mW/cm 2412        MHz




  Measurement Result
 The predicted power density level at 20 cm is 0.0136957 W/cm2. This is below the uncontrolled
 exposure limit of 1 mW/cm2 at 2412MHz.



Document Created: 2012-08-10 19:47:17
Document Modified: 2012-08-10 19:47:17

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC