SAR Analysis Report

FCC ID: YOMMINITEL2010

RF Exposure Info

Download: PDF
FCCID_1715848

SAR ANALYSIS REPORT FROM RFI GLOBAL SERVICES LTD Test of: Mini Telemetry FCC ID: YOMMINITEL2010 To Spec: Apr. 23, 2012 KDB Draft 447498 DR01 SAR Analysis Report V2.0 Version 2.0 Supersedes All Previous Versions Checked By: Richelieu Quoi Issue Date: 24 May 2012 This report is issued in portable document format (PDF). It is only a valid copy of the report if it is being viewed in PDF format with the following security options not allowed: Changing the document, Selecting text and graphics, Adding or changing notes and form fields. This report may not be reproduced other than in full, except with the prior written approval of RFI Global Services Ltd. The results in this report apply only to the sample(s) tested. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by RFI Global Services Ltd. is under license. Other trademarks and trade names are those of their respective owners.

SAR Analysis Report Serial No: SAR Analysis Report V2.0 Version 2.0 Issue Date: 24 May 2012 This page has been left intentionally blank. Page: 2 of 3 RFI Global Services Ltd.

SAR Analysis Report Serial No: SAR Analysis Report V2.0 Version 2.0 Issue Date: 24 May 2012 1. Document for General SAR Test Reduction and Exclusion Guidance Device Description: Mini Telemetry system consists of a separate transmitter and receiver unit; the overall system is intended to be a wireless means of transmitting physiological signals from pregnant women to a bed- side fatal monitor. The transmitter consists of connectors for 3 types of transducers namely pulsed Doppler (fetal heart rate), Fetal ECG and uterine activity (tocotransducer - transducer used to measure uterine activity / IUPC) are provided on the bottom side of the unit. The transducers are placed on ambulatory mother and the unit is strapped to her using loops present on the top side of the transmitter. The transmitter unit communicates with the receiver unit in the frequency range of 608-614 MHz through radio module. The radio module is manufactured by Wood & Douglas. Connected to the module is an integrated helical antenna present inside the transmitter. The receiver is in turn connected to a bedside fetal monitor used to monitor the condition of the fetus. The communication between the transmitter and receiver is unidirectional i.e. from transmitter to receiver. To ensure the device complies to the RF exposure guidelines SAR analysis is carry out in this report as per FCC Apr. 23, 2012 KDB draft 447498 DR01 item IV C 1 (ii) (a), and using 5 mm for the minimum separation distance in the formula. This approach has been agreed with the FCC in a pre- TCB KDB inquiry – 794004. Transmitter Parameters: Transmitter Transmitter Maximum Receiver Receiver Modulation Note Duty Channel Frequency Average Channel Frequency scheme Factor Number (MHz) power (MHz) (mW) 0 608.025 4 mW 0 608.025 FSK 1, 2 100% 15 613.975 4 mW 15 613.975 FSK 1, 2 100% Note: 1. The device is setup in “mode #1” which allows the transmitter powered up in normal operating mode and transmitting data to receiver. 2. Power measured is conducted. 3. power tolerance = +/- 1.25 Calculation for SAR test exclusion considerations: Equation used [(max. power of channel, including tolerance, mW)/(min. separation distance, mm)] · [√f(GHz)] ≤ 3.0; Check for channel 0; ( (4mW + 1.25mW) / 5mm) *(√0.608025) = 0.82 Check for channel 15; ((4mW + 1.25mW) / 5mm) *(√0.613975) = 0.82 Conclusion: Both calculated values for channel 0 and 15 are below the threshold values of 3.0 Page: 3 of 3 RFI Global Services Ltd.


Document Created: 2012-05-24 10:04:46
Document Modified: 2012-05-24 10:04:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC