Manual

FCC ID: YLK-PLU-BT

Users Manual

Download: PDF
FCCID_4154565

PLU-BT Bluetooth Settings Manual Pairing With Bluetooth Lock Lock / Unlock With Paired Mobile Phone Please download “BLE Smart Lock” Connect to Device Connect to Device My locks Open BLE Smart Lock App and select paired BLE Lock-PL1 BLE Lock-PL1 Here are your Locks lock. on Google Play or App Store. Choose a lock to configure Once the installation is completed, turn on the device’s User Name User Name Nearby locks Attention: The working range between the lock and your Smartphone is around 16 feet (5m). Bluetooth and open “BLE Smart Lock” App to begin pairing. Tony Tony Home(paired) Programming Code Programming Code ●●●● ●●●● The lock is not set Motor Detect Error Lock Name Lock Name CONFIRM CONFIRM Home Home Note : Note : If the password is default value, please change the If the password is default value, please change the ios app android app programming code for locker before pairing. programming code for locker before pairing. Mail Calendar Photos Camera Maps Clock Weather News CONNECT CONNECT Home Notes Favorites BLE Smart Lock Attention: Attention: Health Settings When “The lock is not set” message When “Motor Detect Error” message appears. appears. Bluetooth pairing must be carried out while the Please follow the instructions for lock is in unlocked state. Home Unlocked Icon door handing - so that your lock Please first unlock, then proceed with pairing The GREEN (unlocked) icon means the current status knows if it is used on a left hand or process. Home of the lock is "UNLOCKED". right hand door. Then proceed with BLE Smart Lock pairing. Connect to Device My lock Follow the tips, touch lock with mobile phone BLE Lock-PL1 Here are your Locks Wait for the page to scan for Bluetooth locks and select “OK”. in range. Choose a lock to configure Locks found will be shown on screen. User Name This step calibrates the sensor proximity. Nearby locks Select the lock with default name of Please ensure the pairing process is done with Tony mobile phone as close to the lock as possible. BLE Lock-PL1 “BLE Lock-PL1” to continue. Programming Code Failing to do so will cause sensor distance error and Signal Strength Connection Note Note: Bluetooth scanning time may vary depending ●●●● increase safety detection warning area. Always make sure to stand at a close on Android manufacturers. distance from your BLE lock Lock Name Home CANCEL CONFIRM Attention: “BLE Lock-PL1” shown in black font means the unit is available. Note : Paired lock names will be shown in red. If the password is default value, please change the programming code for locker before pairing. The default name may vary for other product model. CONNECT Home Locked Icon The ORANGE (locked) icon means the current status Home of the lock is "LOCKED". Bluetooth paring is completed when the lock Connect to Device Home setting screen displays the following: BLE Lock-PL1 Home User Name Administrator Function Settings Tony Programming Code Home Lock Name (Set by user) Signal Strength ●●●● Go Back Lock Name Home Lock / Unlock Note : If the password is default value, please change the programming code for locker before pairing. Signal Strength Lock Battery Level CONNECT Bluetooth signal strength between Smart phone and lock

PLU-BT Bluetooth Authentication Safety Detection Press ”Back” key and exit App. When the smart phone is within 20" (50cm) of the lock and the connection has been established Make sure your smart phone is within 12" (30cm) of the lock, then push the top button or a 10 seconds countdown will begin on the lock. touch the screen for touchscreen version on your lock to proceed with Bluetooth authentication. If user does not unlock within 10 seconds by pressing the “Bluetooth” button, five short beeps Once authenticated, the mobile phone will send “Unlocked” notification and unlock. will sound warning the user that currently mobile phone is within connection distance and they Bluetooth authentication time may vary between different Android manufacturers and should should move out of the 20" (50cm) connection range. not take longer than 5 seconds. Attention: If authentication fails, mobile phone will send “Unlock distance error” notification. 1 2 3 Inside distance Outside distance Please adjust the distance between mobile phone and lock to within 4 5 6 m) 12" (30cm), and then try again. 7 8 9 ( 30c 20" (50cm) 20" (50cm) 0 12" Administrator Functions Load paired devices list Delete Paired Device From List Select the Setting icon on the top right corner of the locking setting screen to view On “Paired Devices” screen, select the “Edit” button on the top right corner and “Delete” icon paired Bluetooth devices. will appear. Administrator’s name appears in red. All other users’ name appear in black. After pressing delete icon, confirm by pressing “OK” on the confirmation screen to delete. (6 devices max, including the administrator) Home Devices Devices Devices Tony Tony Tony Home Family-1 Family-1 Family-1 Problem Possible Causes Actions Family-2 Family-2 Family-2 Unable to find locks on the (1) Bluetooth not turned on. (1) IOS system please manually Family-3 Family-3 Family-3 scan page. Delete device「IOS」 (2) Batteries are low or dead. enable Bluetooth function. IOS IOS IOS Family-4 (2) Change batteries. CANCEL CONFIRM “The lock is not set” Door handing has not been Please refer to user manual and message appears during set. set door handing first before pairing process. attempting to pair with the lock. Signal Strength “Motor Detect Error” Lock has not been unlocked. Please turn lock bolt to message appears during “Unlocked” state/status, then try pairing process. the pairing process again. “Lock Has Been Reset” (1) The lock has been reset by (1) Please turn lock bolt to message appears when other users. “Unlocked” state/status, then Review Usage Log entering Settings screen in (2) User has been deleted by try the pairing process again. Select administrator device name (in red) to review usage log. App. administrator. (2) Please consult with the Attention: Unlocks made with passwords will show in log as “Code”, but no date and time information will be recorded. administrator. Devices Records REGULATORY COMPLIANCE Home Unable to perform one push (1) Mobile phone is too far (1) Please make sure the mobile Tony This product complies with standards established by the following regulatory bodies: • Federal Communications Commission (FCC) • Industry Canada unlock. from the lock. phone is within 12" (30cm)of Family-1 FCC (2)Lock has been reset. the lock for one push unlock. Tony 1207 12:10 This device complies with Part 15 of the FCC Rules. (2) Please enter the settings Family-2 Operation is subject to the following two conditions: page within the App and Tony 1207 12:16 ( 1 ) this device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. make sure the lock had not Family-3 Family-1 1207 14:03 These limits are designed to provide reasonable protection against harmful interference in a residential installation. been reset. IOS 1207 14:23 This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. IOS IOS 1207 15:08 However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the Tony 1207 15:15 interference by one or more of the following measures: IOS 1207 16:11 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. IOS 1207 16:15 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Safety detection still beeps Mobile phone was not paired Please reset lock or contact IMPORTANT ! warning at distance over correctly by touching the lock administrator and delete Changes or modifications not expressly approved by the manufacturer could void the user' authority to operate the equipment. 3 feet (1m). during the pairing process. currently user, then try pairing the lock again to establish This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired safety distance. operation of the device.




Document Created: 2019-01-21 16:40:19
Document Modified: 2019-01-21 16:40:19
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC