Users Manual

FCC ID: YJFDCRX02-CC

Users Manual

Download: PDF

PRODUCT MANUAL
6
beamLabs.io


TABLE OF CONTENTS

 Congratulations on purchasing your beamUP garage
 door opener. It will provide you with many years of       Carton Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1     Enabling/Disabling Motion Sensing
 security, safety and convenience. This installation and
                                                                                                                                                                         Security Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
 owner’s manual contains complete instructions for         Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
 installing and operating your garage door opener.                                                                                                                       Connecting Standard Door Control . . . . . . . . . . . . . . . . . . 18
                                                           Preparation + Tools Needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
 For warranty registration                                                                                                                                               Travel Limit Adjustment – UP Limit . . . . . . . . . . . . . . . . . . . . 19
 beamLabs.io/warranty                                      Rail Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
                                                                                                                                                                         Travel Limit Adjustment – DOWN Limit . . . . . . . . . . . . . . 20
                                                           Rail and Power Head Assembly . . . . . . . . . . . . . . . . . . . . . . . . 5
                                                                                                                                                                         Setting the Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
                                                           Trolley and Pulley Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
                                                                                                                                                                         Final Adjustments and Testing . . . . . . . . . . . . . . . . . . . . . . . . 22
                                                           Installing Chain and Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
                                                                                                                                                                         Handheld Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
                                                           Attaching Sprocket Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
                                                                                                                                                                         Wireless Keypad                     ........................................                            24
                                                           Mounting Header Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
                                                                                                                                                                         beamUP Smart Garage Door Controller . . . . . . . . . . . . 25
                                                           Attaching Rail and Mounting Door Bracket . . . . . . . . . 10
                                                                                                                                                                         Using your Garage Door Opener . . . . . . . . . . . . . . . . . . . . 26
                                                           Mounting Power Head to Ceiling . . . . . . . . . . . . . . . . . . . . . 11
                                                                                                                                                                         Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
                                                           Attaching Door Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
                                                                                                                                                                         Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
                                                           Emergency Release Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
                                                                                                                                                                         Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
                                                           Connecting Photo Eye Safety System . . . . . . . . . . . . . . . . 14
                                                                                                                                                                         Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
                                                           Connecting Power and Aligning Photo
                                                           Eye Safety System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15          Opener Assembly Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

                                                           Connecting Deluxe Door Control . . . . . . . . . . . . . . . . . . . . . 16


CARTON CONTENTS




                                Clevis Pin     Hitch Pin       Flange Nut     Self-Threading
                                                                            Screw - 1/4” x 5/8”


  (BSBHF%PPS0QFOFS6


                                 Lag Screw        Bolt           Anchors
                               5/16"- 1/1/2"   5/16” - 18x1"




                                                                                                  beamLabs.io   1-800-436-9186   1


BEFORE YOU BEGIN                                                                        SAFETY INSTRUCTIONS

                                                                                                                               WARNING
      Measure door height.              Check mounting        Check your toolbox. Do
                                            locations.         you have all the tools    To reduce the risk of severe injury or death:
                                          Are additional            needed?
                                     reinforcement material
                                                                                         1. READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
                         7.5 feet
                         h
                          (2.28 m)           needed?                                     2. Install only on a properly balanced garage door. An improperly balanced
                                                                                            door has the potential to inflict severe injury. Have a qualified service
                                                                                            person make repairs to cables, spring assemblies, and other hardware
     If over 7.5 feet (2.28 m),                                                             before installing the opener.
      rail extension kit will be
               needed.                    See page 3                See page 3
                                                                                         3. Remove all ropes and remove or make inoperative all locks connected to
                                                                                            the garage door before installing opener.

                                                                                         4. Where possible, install the door opener 7 feet (2.13 m) or more above the
                                                                                            floor. For products having an emergency release, mount the emergency
                                                                                            release within reach, but at least 6 feet above the floor and avoiding con-
                                                                                            tact with vehicles to avoid accidental release.

                                                                                         5. Do not connect the opener to source of power until instructed to do so.

                                                                                         6. Locate the control button: (a) within sight of door, (b) at a minimum height
                                                                                            of 5 feet so small children are not able to reach it, and (c) away from all
                                                                                            moving parts of the door.

                                                                                         7. Install the Entrapment Warning Label next to the wall-mount control button
                                                                                            in a prominent location. In case the adhesive not adhere on the surface,
                                                                                            the label should be attached to the by mechanicals means.

                                                                                         8. After installing the opener, the door must reverse when it contacts a
                                                                                            1-1/2 inch (3.8 cm) high object (or a 2x4 board) laid flat on the floor.




2   beamLabs.io    1-800-436-9186


PREPARE GARAGE DOOR FOR INSTALLATION                                               TOOLS NEEDED

 DO NOT REUSE PARTS AND
 WIRING FROM AN OLD
 OPENER!!!

 BEFORE beginning                                                                                             Level
 installation:
                                                                                                                                Adjustable Wrench
 1. Disable locks and disengage
    trolley from current opener.                                                                              Pencil

 2. Perform the following door
    test to ensure your door
    is balanced and in good
    working condition.                                                                  Step Ladder       Screwdriver               Tape Measure

    Make sure garage door is fully
    closed before you start the installation

 To test your garage door:
 1. Raise and lower the door to check if there is any sticking or binding.
                                                                                           Pliers        Drill 3/16" and           Rubber Mallet
 2. Check for loose hinges, damaged rollers, frayed cables and damaged or
                                                                                                         5/16" Drill Bits
    broken springs.

 3. Lift the door approximately halfway and release. The door should stay at
    that point under proper spring tension.
                                                                                        Ratchet with
    Call a qualified garage door service technician if your door binds, sticks or      5/16", 7/16" and
    is unbalanced.                                                                      1/2" sockets       Hack Saw                   Hammer




                                                                                                                            beamLabs.io   1-800-436-9186   3


RAIL ASSEMBLY

                  Look in the box for:
                   Rail – Header Segment      Connect rails starting with the rail header segment. To apply additional force tap gently on the end of the rail
                                              with a rubber mallet or on padded flooring.
                                                                                                                                    Securely connected by applying force

                                                                                       Rail- Middle
                                                                                        Segment
                  Rail – Middle Segments x3
                                                                                                                            Right


                                              Rail- Header
                                               Segment                                                                                     Loosely connected
                                                                                                                                                          ed


                                                                                                                          Wrong



                    Rail – End Segments

                                                                                                                                               Rail- End Segment
                                                                                                                                              3BJM&OE4FHNFOU
                                                                                                                                                    &OE 4FHNF


                                                                                                                              x3
                                                                                                                     gmF OtsUTY
                                                                                                                        en
                                                                                                         E
                                                                                                        id dMFle4SFeHN
                                                                                                    - JE
                                                                                                      M
                     Tools needed:                                                         3BRJMa.
                                                                                                 il                                                          4UPQ
                                                                                                                                                             4UPQ#PMU
                                                                                                                                                                  #PMU
                                                                                                                                                               Stop Bolt


                       Rubber Mallet
                                               Rail- Header Segment
                                               3BJMM)FBEFS4FHNFOU




4   beamLabs.io    1-800-436-9186


RAIL AND POWER HEAD ASSEMBLY

          Look in the box for:
                                           Use garage door opener carton to assemble rail to power head. Use packing material as protective base for
       (BSBHF%PPS0QFOFS6
                                           power head.



                                               3BJM#SBDLFU
                                                     Rail Bracket




               Opener
                p     Carton
                                           Align and slide rail into rail         Insert clevis pin into rail             Insert hitch pin into clevis pin
                                           bracket as shown.                      bracket as shown.                       as shown.


                                           




                      U
                                           
     Clevis Pin                Hitch Pin
   3/8" x 1-3/4"




                                                                                                                                beamLabs.io     1-800-436-9186   5


TROLLEY AND PULLEY ASSEMBLY

                  Look in the box for:
                          Trolley               Slide Trolley onto the rail. Make sure the arrow on the trolley points toward the door.


                                                                                            




                          Pulley


                                                Insert pulley into the rail slot.        Insert clevis pin through rail            Insert hitch pin into clevis pin.
                                                                                         hole and pulley.
                                                                                                                Z
                                                                                         
                                                                                                                                     

           Clevis Pin               Hitch Pin
         3/8" x 1-3/4"

                                                 
                                                                                                                                    




6   beamLabs.io   1-800-436-9186


INSTALLING CABLE AND CHAIN

              Look in the box for:
                                                      Align end of chain around sprocket and extend chain past chassis. Pull chain with box along the rail towards
               Chain/Cable Assembly
                                                      trolley and then remove box.

                                                                                                        
                                                          
                                                               Chassis
                                                                $IBTTJT




                     Master Link

                                                      Insert cable through circular           Pull trolley lock lever down              Bring cable and chain
                                                      hole in trolley. Pull cable             to unlock. Insert trolley shaft           together and connect cable
                                                      through pulley slot and                 into trolley. Lock trolley shaft in       and chain with master link.
                                                      toward power head.                      trolley by pulling lever back up.

                                                                                                               CBDLVQ


                   WARNING
 To prevent SERIOUS INJURY:
                                                                                                                   Trolley in engaged
                                                                                                                    -PDLMFWFS
 • DO NOT connect power until instructed.                                                                         position
 • Keep hands and fingers clear from sprocket during
   operation.
 • Wear gloves when installing chain and cable.
 • Keep hands and fingers away from joints and
   possible sharp edges.



                                                                                                                                             beamLabs.io   1-800-436-9186   7


INSTALLING CABLE AND CHAIN/ATTACHING SPROCKET COVER

                  Look in the box for:
                     Sprocket Cover                      Turn chain-to-cable connector on trolley shaft until chain is about 1/4 inch (.64 cm) above the base of rail.




       Front
       Tab
                                                                                                                                                            5JHIUFOVOUJM
                                                                                                                                                            Tighten until...




                                                                         Chain-to-cable connector
                                                                                                                                                          
                                                                                                                                                          1/4 inch (.64 cm)




                                                         Attach sprocket cover to                   Fasten rear tab with flange nut           Fasten front tab with self-
                                                         power head.                                on top of steel chassis.                 threading screws to hole on
                                              Rear Tab                                                                                       top of steel chassis.


        Self-Threading                Flange Nut
      Screw - 1/4" x 5/8"




        G




8   beamLabs.io   1-800-436-9186


MOUNTING HEADER BRACKET

              Look in the box for:
                                                        Above door, mark the center line of the door with a pencil, through wall. Open door to the highest point of
     Header Bracket              2 x Lag Screw
                                                        travel.
                                 5/16" x 1-1/2"


                                                                                                                Highest Point
                                                                                                                    of Travel



                                                                                           $FOUFS-JOF
                                                                                           Center Line




                   WARNING
 To prevent SERIOUS INJURY:                             Take a level, measure and mark highest point of the             Measure 2-1/4 inch (5.7 cm), mark two holes of
 • DO NOT connect power until instructed.               door on the wall. Raise level to clear torsion bar if           header bracket. Drill two holes and fasten header
 • The header bracket MUST be SECURELY fastened         required, then mark highest point.                              bracket using screws.
   to the structural support on the mounting wall or
   ceiling, otherwise other door may not reverse when                                                                                           2-1/4 inch (5.7cm)

   required. DO NOT install the header bracket over
   drywall.
 • Concrete anchors MUST be used when mounting
   the header bracket into masonry.                                                                                        

 • NEVER try to loosen, move or adjust garage door                                                                       2-1/4" inch
                                                                                                                              
                                                                                                                            2-1/4"
   springs, cables, pulleys, brackets, or hardware.                                                                         (5.7cm)

 • Contact a qualified garage door service technician
   if your door binds, sticks or is unbalanced. An
   unbalanced door might not reverse when required.



                                                                                                                                                 beamLabs.io      1-800-436-9186   9


ATTACHING RAIL AND MOUNTING DOOR BRACKET

                    Look in the box for:
                                                            Use garage door opener carton to support power       Align header rail hole to header bracket hole.
            Hitch Pin                     Clevis Pin
                                                            head. Rail return pulley end should be pointing to
                                        3/8" x 1-3/4"
                                                            header bracket.
                                                                                                                                                            Header
                                                                                                                        Header
                                                                                                                      )FBEFS
                                                                                                                       Rail Hole
                                                                                                                                                            )FBEFS
                                                                                                                                                            Bracket Hole
                                                                                                                     3BJM)PMF                          #SBDLFU)PMF
          Door Bracket                 2 x Self-Threading
                                      Screw - 1/4" x 5/8"
                                                                                        $FOUFS-JOF
                                                                                        Center Line




                                                            Connect header rail and header bracket with clevis   Position door bracket on centerline of the top
                                                            pin and secure with hitch pin.                       garage door panel. Door bracket should be 2-4
                                                                                                                 inches (5-10 cm) below the top edge of door panel.

                                                                                                                          Door
                                                                                                                          %PPS
                                                                                                                          Edge
                                                                                                                          &EHF
                         CAUTION!
     To prevent SERIOUS INJURY:                                                                                                                
                                                                                                                                               2"    
                                                                                                                                                  - 4"

     • DO NOT connect power until instructed.
     • REINFORCEMENT is recommended for fiberglass,
       aluminum or lightweight steel garage doors
       BEFORE installing the door bracket. Contact your
       door manufacturer for reinforcement options.




10    beamLabs.io    1-800-436-9186


MOUNTING POWER HEAD TO CEILING                                                                                                                           Need rewritten text

               Look in the box for:
                                                          Raise power head and place it on top of step                    Angle
      4 x Lag Screw                   4 x Bolt                                                                            "OHMF
                                                          ladder. Position and align power head with                       Iron
                                                                                                                            *SPO           Structural Support
                                                                                                                                              4USVDUVSBM4VQQPSU
      5/16"
       /    x 1-1/2"
                 /                 5/16"
                                   5/16 - 18 x 1"
                                               1
                                                          rail assembly to centerline.




      4 x Flange Nut             Hanging Brackets                                                          B                   C                   D
                                  (not supplied)
                                                                                                         Three most common installation options. Determine the mounting
                                                                                                                        option that works best for you.



                                                          Fasten angle iron to stud              Cut both hanging brackets to             Raise power head and secure
                                                          under a finished ceiling.               appropriate length. Secure               one end of each hanging bracket
                                                          Raise power head to measure            opener from each side to                 to angle iron with 5/16" x 1 bolt.
                                                          distance from each side, rail          hanging brackets with 5/16"              Open door manually to check
                                                          must be horizontal.                    x 1 bolt.                                clearance between highest point
                     WARNING                                                                                                              of travel of door and rail.

 To prevent SERIOUS INJURY:
 • DO NOT connect power until instructed.
 • Install the opener at least 7 feet (2.13m) above the
   floor.
 • Fasten the opener SECURELY to STRUCTURAL
   SUPPORT of the garage to prevent falling.
 • If installing brackets to masonry, concrete anchors                                                                                                 0QFO
                                                                                                                                                       Open
   (not provided) MUST be used.




                                                                                                                                                beamLabs.io        1-800-436-9186   11


ATTACHING DOOR ARMS

                    LLook in the box for:
                                                           Close your garage door and       Fasten straight door arm to          Attached door arms fasten with
        Curved
          rved Doorr A
                     Arm              Straight Door Arm
                                                           disengage trolley. Fasten        trolley with a 5/16" x 1" clevis     two 5/16" bolts and flange
                                                           curved door arm to the door      pin and secure with hitch pin.       nuts. Bring straight and curved
                                                           bracket with 5/16" x 1" clevis                                        door arm together. Find two
                                                           pin and secure with hitch pin.                                        pairs of holes that line up and
                                                                                                                                 join sections with two 5/16"
                                                                                                                                 bolts and flange nuts. Select
           2 x Hitch
               H     Pin                2 x Clevis Pin
                                                                                                                                 holes as far apart as possible to
                                          3/8" x 1"
                                                                                                                                 increase door arm rigidity.



            2 x Bolt                   2 x Flange Nut                                                                                      8" (20.3 cm)
                                                                                                                                                 w
         5/16" - 18 x 1"
                                                                                                                                     3"
                                                                                                                                       w
                                                                                                                               (7.6 cm)




                           WARNING                                                                                                               2"-w
                                                                                                                                                      4"

     To prevent SERIOUS INJURY:
     • DO NOT connect power until instructed.
     • Keep hands and fingers away from the sprocket
       during operation.
     • Wear gloves when installing chain/belt and cable.
     • Keep hands and fingers away from joints and
       possible sharp edges.



12    beamLabs.io    1-800-436-9186


INSTALLING EMERGENCY RELEASE HANDLE

               Look in the box for:
              Emergency
                 rgency
                  gency Releas
                        Release Han
                                Handle                        * VERY IMPORTANT! *
                                                              Emergency release handle must clear all vehicles. An Emergency release handle set too low may get caught
                                                              by the vehicle and cause damage to the opener. Measure from the floor to the top of your vehicle and set the
                                                              emergency release handle above this measurement.




                                                              Thread end of rope through handle and secure with           Measure rope length so the handle is 6 feet
                                                              an over hand knot. Thread end of the rope through           (183 cm) above the floor and is clear from the top of
                                                              hole in trolley lever.                                      your vehicle. Secure with a overhand knot.




                     WARNING
 To prevent SERIOUS INJURY:                                                                                  )PMF
                                                                                                         Hole in
                                                                                                         Trolley
 • In case of power outage or door obstruction, PULL                                                         5SPM
                                                                                                         Lever
   EMERGENCY HANDLE to release door from opener.                                                              -FW
 • When trolley is disengaged, (trolley level pointing
   down) door can be operated manually.
 • To engage, flip the trolley lever up so it is horizontal.
   Trolley will automatically re-engage when garage
   door opener is activated.
 • DO NOT use emergency handle to pull the door
   open or close.



                                                                                                                                                   beamLabs.io    1-800-436-9186   13


CONNECTING PHOTO EYE SAFETY SYSTEM

     Look in the box for:
                                                            Mount photo eyes.                                               Run wire to head. Use insulated staples to secure
           Photo Eyes            4x Screw #12 x 1-1/4"
                                                                                                                            photo eyes’ wire to wall or ceiling. Be careful not to
                                                                              Photos eyes                                   damage the wires while securing staples.
                                                                              should be no
                                                                              more than 6
                                                                            G
                                                                              inches (15.2 cm)
                                                                              above the floor.




                                                                                                                   "MUFS
                                                                                                                'MPPS N
                                                                            Floor mounting       Door track mounting
                                                                 H


                                                            * VERY IMPORTANT! *                              Cut and discard excess wire. Use small flat head screwdriver to
                                                                                                             push in orange tab on the wire terminal, insert 1/2 inch (1.2 cm) of
                                                            Strip 7/16 inch (1 cm) of insulation
                        WARNING                                                                              the wire into the terminal while pushing in the tab. Connect wires
                                                            from the end of the wire.
                                                                                                             to power head.
     To prevent SERIOUS INJURY or DEATH from
     electrocution:                                                        inch (1 cm)
                                                                          7/16                                                                 
     • Power MUST NOT be connected until instructed.
                                                            Each pair of terminals MUST be
     • The garage door opener will not operate until the    connected with one white wire and
       photo eye safety system is properly connected and    one striped wire (non-polarized) from
       aligned.                                             the SAME accessory.
     • Install the photo eye safety system NO higher than
       6" (15 cm) above the floor.
     • No part of garage door or other objects should
       obstruct the photo eye safety system during door-
       closing.



14    beamLabs.io   1-800-436-9186


CONNECTING POWER AND ALIGNING PHOTO EYE SAFETY SYSTEM

                    WARNING
 To prevent SERIOUS INJURY or DEATH from                * DO NOT OPERATE OPENER AT THIS TIME *
 electrocution or fire:                                  Plug power head into a grounded outlet ONLY. If there                       For Permanent Wiring ONLY
 • Power MUST be DISCONNECTED BEFORE                    is no grounded outlet present, call a qualified electrician
                                                        to replace the outlet. Use of a surge protector is highly      $POEVJUXJUIXJSF
   proceeding with permanent wiring procedures.                                                                               -JOF #MBDL 
                                                        recommended.                                                                                     (SPVOE (SFFO:FMMPX 
 • Garage door opener installation and wiring MUST                                                                        /FVUSBM 8IJUF 
   be in compliance with all local electrical and                                                                    OFOU
                                                                                                                                  8IJUF                 (SPVOE4DSFX (SFFO 
   building codes. Make sure the opener is ALWAYS                                                                    /-:     8IJUF
                                                                                                                                                               #SPXO
   grounded.
                                                                                                                            #MBDL                      #MBDL GSPNUSBOTGPSNFS 
 • NEVER use an extension cord, 2-wire adapter or       Right                       Wrong                             GSPNUSBOTGPSNFS 
   modify the power plug in any way to make it fit the                                                                                                         8JSFOVU
   outlet.

 To prevent SERIOUS INJURY or DEATH from a closing
 garage door:                                            When the photo eye safety system is properly                  Green LED (emitter) will flash until it is aligned with
 • The photo eye safety system MUST be installed        aligned green LED (emitter) will emit a steady green           red LED (sensor). Red LED will not illuminate until it
   BEFORE connecting power.                             light and the red LED (sensor) will emit a steady red          is aligned with Green LED.
                                                        light. The path of the invisible light beam MUST NOT
 • The photo eye safety system MUST be properly                                                                                 Emitter                             Sensor
                                                        be obstructed. No part of the garage door or any
   connected and aligned BEFORE operating the                                                                                Green LED ON                         Red LED ON
                                                        hardware should interfere or block either sensor.
   opener.
                                                                                                                                                Aligned
                                                                                                                                               Steady Red &
                                                                                                                                                Green LED


                                                                                                                      The emitter generates the invisible light beam, and
                                                                                                                      the sensor receives the invisible light beam.
                                                                                                      Invisible
                                                                                                      Light Beam




                                                                                                                                                  beamLabs.io      1-800-436-9186   15


CONNECTING DELUXE DOOR CONTROL (BU400, BU800)

                    Look in the box for:
                                                                                       Wire deluxe door control to power                             1. Strip 7/16 inch (11 mm) of insulation from wire and separate wires.
      Deluxe Door Control*         2x Screw #6 x 1-3/8"
                                                                                       head as shown.                                                2. Connect one wire to each of the two screws on the back of the
                                                                                                              Deluxe Door Control                       door control. **DO NOT USE PRE-EXISTING WIRE**
                                                                                                                                                     3. Mark the location of bottom mounting hole and drill 5/32 inch hole.
                                                                                                                                                     4   Install the bottom screw and allow 1/8 inch (3 mm) to protrude
                                   2x Drywall Anchors                                                                                                    from wall. Note: Use anchors if mounting to drywall.
                                       [New Image]                                                                                    %FMVYF%PPS
                                                                                                                                        $POUSPM
                                                                                                                               .JOh
                                                                                                                               Min. 5' (1.52 m)
                                                                                                                            BCPWFGMPPS
                                                                                                                               above floor

                                                                                                                                                                                     1st screw
                                                                                                                                                                                     TDSFX



                                                                                      Connect plug from deluxe door control to                               Using the deluxe door control (ONLY after programming
                                                                                      wall panel outlet on the back panel of the                             has been completed).
                                                                                      power head.
                                                                                                                                                                                  Door – Press and release to open/close the door
                                                                                      **If using pre-existing wire you may cut off
                        WARNING                                                       plug and splice to existing wire**                                                          Light – Press and hold to activate/deactivate motion
                                                                                                                                                                 -*()5           sensing security lighting
     To prevent SERIOUS INJURY:
     • DO NOT connect power until instructed.                                                                                                                    6/-0$,
                                                                                                                                                                                  Vacation Lock
                                                                                                                                                                                  Unlock – Slide lock button to the right to enable all
     • install the garage door opener at least 7 feet
                                                                                                                                                                                  remotes, door control, and accessories.
       (2.13 m) above the floor.                                                                                                                              4MJEF

     • Fasten the power head SECURELY to STRUCTURAL                                                                                                                       -0$,   Lock – Slide lock button to the left to disable all
       SUPPORTS of the garage to prevent falling.                                                                                                                                 remotes, door control, and accessories.
     • If installing brackets to masonry, concrete anchors
       (not provided) MUST be used.



16    beamLabs.io    1-800-436-9186   *NOTE: Your opener will contain one of two door controls. Follow the instructions corresponding to the control provided.


MOTION ACTIVATED SECURITY LIGHTING (BU400, BU800)                                                                    Need images



                            Security lighting is activated   Motion sensing is turned on         To deactivate motion sensing:
                            and remains on for 4.5           by default and will activate        Press and hold “LIGHT” button
                            minutes when garage door         security lighting when motion       for 2 seconds. The power head
                            opener is operated.              is detected within the garage.      will beep once to indicate
                                                             Security lighting will remain       motion sensing has been
                                                             illuminated for 4.5 minutes or      deactivated.
                                                             for as long as there is motion in
                                                                                                 To active motion sensing: Press
                                                             the garage.
                                                                                                 and hold “LIGHT” button for 2
                                                                                                 seconds. The power head will
                                                                                                 beep 3x to indicate motion
                                                                                                 sensing has been activated.




                                                                                                     beamLabs.io    1-800-436-9186   17


CONNECTING STANDARD DOOR CONTROL (BU100)

                    Look in the box for:
                                                                          Wire standard door control to                                 1. Strip 7/16 inch (11 mm) of insulation from wire and separate wires.
     Standard Door Control*        2x Screw #6
                                             6 x 11-3/8"
                                                    3/8
                                                                          opener as shown.                                              2. Connect one wire to each of the two screws on the back of the
                                                                                                          Standard Door Control
                                                                                                                                           door control. **DO NOT USE PRE-EXISTING WIRE**
                                                                                                                                        3. Mark the location of bottom mounting hole and drill 5/32 inch hole.
                                                                                                                                        4    Install the bottom screw and allow 1/8 inch (3 mm) to protrude
                                    2x Drywall Anchors                                                                                       from wall. Note: Use anchors if mounting to drywall.
                                                                                                             Min. 5'
                                       [New Image]                                                             .JOh
                                                                                                              (1.52 m)
                                                                                                            BCPWFGMPPS
                                                                                                             above floor


                                                                                                                                                               1st screw
                                                                                                                                                               TDSFX



                                                                         Connect the wire from the standard door control to the push button terminal on the rear panel of the power head.

                                                                         **If using pre-existing wire you may cut off plug and splice to existing wire**


                         WARNING
     To prevent SERIOUS INJURY:
     • DO NOT connect power until instructed.
     • Install the opener at least 7 feet (2.13m) above the
       floor.
     • Fasten the power head SECURELY to STRUCTURAL
       SUPPORTS of the garage to prevent falling.
     • If installing brackets to masonry, concrete anchors
       (not provided) MUST be used.



18    beamLabs.io    1-800-436-9186                           *NOTE: Your opener will contain one of two door controls. Follow the instructions corresponding to the control provided.


TRAVEL LIMIT ADJUSTMENT - UP LIMIT                                                                                           Need text from up down limit 110518 PDF

                    WARNING
                                                          Press and Release LIMIT button once, green light (UP) will turn on. With green light on, press and hold UP
 To prevent SERIOUS INJURY or DEATH from
                                                          button, the door will go UP to the desired UP limit position.
 improper Force Adjustment:
                                                                                                      H                          Q
 • YOU CANNOT adjust force manually to compensate                                                                    
   for binding or sticking of the garage door. Call
   a qualified garage door service person to make
   necessary adjustments in case of binding.
 • YOU CANNOT manually increase the force required
   for closing the door.
 • After ANY adjustments, Safety Reverse Test MUST be
                                                                                                     1SFTTBOESFMFBTF
                                                                                                         Press and release
   performed to ensure the door reverses on contact                                                                                        1SFTTBOEIPME61
                                                                                                                                            Press and hold UP
                                                                                                        -*.*5KVTUPODF
                                                                                                         LIMIT just once
   with a 1.5 inch (3.8 cm) high object (2x4 laid flat).



                                                          * DO NOT HIT STOP BOLT *                                           Once the door is at the desired UP limit position,
                                                                                                                             press and release “LIMIT” button once, “OK”
                                                          There should be a minimum 2 inch (5 cm) gap
                                                                                                                             indicator (orange) flashes and turns off. The UP
                                                          between trolley and stop bolt.
                                                                                                                             limit is set.
                                                            Minimum 2 inch (5 cm) gap
                                                          .JOJNVNwDMFBSBODF

                                                             Trolley    Stop Bolt
                                                           5SPMMFZ
                                                                Z    4UPQ#PMU
                                                                                                                              Desired
                                                                                                                               %FTJSFE
                                                                                                                               61MJNJU
                                                                                                                              UP limit



                                                                                                                                                                         1SFTTBOESFMFBTF
                                                                                                                                                  Press and release LIMIT just once




                                                                                                                                                        beamLabs.io       1-800-436-9186      19


TRAVEL LIMIT ADJUSTMENT - DOWN LIMIT                                                                                    Need text from up down limit 110518 PDF

                        WARNING
     To prevent SERIOUS INJURY or DEATH from               Press and Release LIMIT button TWICE, red light (DOWN) will turn on. With red light on, press and hold DOWN
     improper Force Adjustment:                            button, the door will travel down, to the desired DOWN limit position

     • YOU CANNOT adjust force manually to compensate
                                                                                                                   
       for binding or sticking of the garage door. Call
       a qualified garage door service person to make
       necessary adjustments in case of binding.
     • YOU CANNOT manually increase the force required
       for closing the door.
     • After ANY adjustments, Safety Reverse Test MUST
       be performed to ensure the door reverses on                                                 1SFTTBOESFMFBTF
                                                                                                    Press and release
                                                                                                                                      1SFTTBOEIPME%08/
                                                                                                                                    Press and hold DOWN
       contact with a 1.5 inch (3.8 cm) high object (2x4                                              -*.*5
                                                                                                    LIMIT   UXJDF
                                                                                                          twice
       laid flat).

                                                           Once the door is at the desired DOWN limit position, press and release “LIMIT” button once, “OK” indicator
                                                           (orange) flashes and turns off. The DOWN limit is set.




                                                                              Desired DOWN limit                          Press and release LIMIT just once




20    beamLabs.io   1-800-436-9186


SETTING THE FORCE                                                                                                Need text from up down limit 110518 PDF

                    WARNING
                                                        With both UP and DOWN lights on, press and release the
 To prevent SERIOUS INJURY or DEATH from
                                                        FORCE button once to enter Auto Force Setting.
 improper Force Adjustment:
 • YOU CANNOT adjust force manually to compensate
   for binding or sticking of the garage door. Call
   a qualified garage door service person to make
   necessary adjustments in case of binding.
 • YOU CANNOT manually increase the force required
   for closing the door.
 • After ANY adjustments, Safety Reverse Test MUST
   be performed to ensure the door reverses on
   contact with a 1.5" (3.8 cm) high object (2x4 laid
   flat).                                                The door will travel        Stop at UP limit for 2       Door will then     And stop at down limit.
                                                        UP automatically.           seconds.                     travel DOWN        OK indicator (orange)
                                                                                                                 automatically.     will flash with beeps,
                                                                                                                                    Auto Force Setting is
                                                                                                                                    completed.

                                                                                                                                     




                                                                                             2TFD
                                                                                                sec


                                                                                                                                                  'MBTIBOE
                                                                                                                                                  Flash and 2
                                                                                                                                                  beeps
                                                                                                                                                   CFFQT




                                                                                                                                  beamLabs.io   1-800-436-9186   21


FINAL ADJUSTMENTS AND TESTING
                        WARNING
                                                                                          Open door using                         Place a 1-1/2 inch (3.8cm)                    Use Door Control to close door. Door MUST
     To prevent SERIOUS INJURY or DEATH from a                                            door control.                           flat solid object on the floor,                 REVERSE and beep within 1.5 seconds upon
        closing garage door:                                                                                                      centered under the garage door.               striking the object, and stop at the fully open
     • The Safety Reversal Test MUST be conducted ONCE                                                                                                                          position. Use door control or remote to close
       A MONTH.                                                                                                                                                                 door. Door MUST reverse* upon making
                                                                                                                                                                                contact with the object.
     • NO ONE should cross the path of moving door
       during operation and/or testing.                                                                                                                                                      
     • After ANY adjustments to the door system, the
       Safety Reverse Test MUST be performed to ensure
       the door reverses on contact with a 1-1/2 inch (3.8                                                                                                                                                  beeps
                                                                                                                                                                                                             CFFQTupon
       cm) thick (2x4 laid flat) object.                                                                                           1-1/2 inch (3.8 cm) solid object                                          contact
                                                                                                                                                                                                              VQPO
                                                                                                                                                                                                             TUSJLF
     • The Photo Eye Safety System MUST be properly
       aligned, and tested regularly.
                                                                                         1. Open the door by using the door control.
                                                                                         2. Make sure photo eye safety system are aligned with both the red and green LEDs illuminated. If not, refer
                                                                                         back to page 14. Place the garage door opener carton in the path of the door.
                                                                                         3. Keeping the door in sight press the door control or remote control to close the door
                                                                                         Door should NOT move more than 1 inch (2.5 cm) and the garage door opener will beep and flash 20 times.

                                                                                                                                                               Emitter
                                                                                                                                                                &NJUUFS                         Sensor
                                                                                                                                                                                                  4FOTPS



                                                                                                                                                                            20 beeps and
                                                                                                                                                                           CFFQTBOE
                                                                                                                                                                           reverses upon
                                                                                                                                                              Green LED
                                                                                                                                                             (SFFO-JHIU   SFWFSTFTVQPO      Red LED
                                                                                                                                                                                              3FE-JHIU
                                                                                                                                                                             obstruction
                                                                                                                                                                Flashes      PCTUSVDUJPO           OFF
                                                                                                                                                                'MBTIFT                           0''




22    beamLabs.io    1-800-436-9186    * If door does not reverse, return to page 17, reprogram the operator, taking care to set the down limit lower than initially.                       Verify correct page numbers


SPARE PARTS


                                                                                                     
                          


                                                                                               B
                                                                                                   """
                                                                                                                 C


                                                                                                         """




    $MFWJT1JO                 4FMG5ISFBEJOH                     -BH4DSFX           #PMU                   "ODIPS
                  )JUDI1JO                      'MBOHF/VU
                                    4DSFX                                           /05&/PU"WBJMBCMFBTJOEJWJEVBMQBSUT



                                             
                                                                                                  
                                                                        
   
                                               
                                                                                            

   




                                                                                                                               beamLabs.io   1-800-436-9186   


OPENER ASSEMBLY PARTS

                                        

                                    

                           

                                    
                                                          
                                            

                                                        
                                


                                               


                             

     )&&^ƚĂƚĞŵĞŶƚ˖
     $Q\&KDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOGYRLGWKHXVHU¶VDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
     7KLV GHYLFH FRPSOLHV ZLWK SDUW  RI WKH )&& 5XOHV 2SHUDWLRQ LV VXEMHFW WR WKH IROORZLQJ WZR FRQGLWLRQV   7KLV GHYLFH PD\ QRW FDXVHKDUPIXO
     LQWHUIHUHQFH DQG   WKLV GHYLFH PXVW DFFHSW DQ\ LQWHUIHUHQFH UHFHLYHG LQFOXGLQJ LQWHUIHUHQFH WKDW PD\ FDXVH XQGHVLUHG RSHUDWLRQ




   beamLabs.io   1-800-436-9186



Document Created: 2019-06-10 23:45:06
Document Modified: 2019-06-10 23:45:06

© 2019 FCC.report
This site is not affiliated with or endorsed by the FCC