Test Report

FCC ID: YHXESQ-3040R4

Test Report

Download: PDF
FCCID_1769730

Masterbuilt Manufacturing, Inc. Application For Certification FCC ID: YHXESQ-3040R4 Electric Smoker with RF Model: 20070512 Additional Model: 20072512, 20072612, 20072712, 20072812, 20073012, 20070312, 20072112, 20072212, 20072312, 20072412, 20072912 2.4GHz Transceiver Report No.: SZ12070003-2 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-11] Prepared and Checked by: Approved by: Digitally signed by Billy Li Location: Intertek Sign on file Testing Services Leo Lai Billy Li Engineer Supervisor Date: 18 July, 2012 • The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_TX_b Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com

INTERTEK TESTING SERVICES LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Test Equipment List TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 i

INTERTEK TESTING SERVICES MEASUREMENT/TECHNICAL REPORT Masterbuilt Manufacturing, Inc. - Model: 20070512 Additional Model: 20072512, 20072612, 20072712, 20072812, 20073012, 20070312, 20072112, 20072212, 20072312, 20072412, 20072912 FCC ID: YHXESQ-3040R4 18 July, 2012 This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-11 Edition] provision. Report prepared by: Billy Li Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8601 6288 Fax: (86 755) 8601 6751 TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 ii

INTERTEK TESTING SERVICES Table of Contents 1.0 General Description ..................................................................................................... 2 1.1 Product Description .................................................................................................... 2 1.2 Related Submittal(s) Grants ....................................................................................... 2 1.3 Test Methodology ....................................................................................................... 3 1.4 Test Facility ................................................................................................................ 3 2.0 System Test Configuration ......................................................................................... 5 2.1 Justification................................................................................................................. 5 2.2 EUT Exercising Software............................................................................................ 5 2.3 Special Accessories ................................................................................................... 5 2.4 Equipment Modification .............................................................................................. 6 2.5 Measurement Uncertainty .......................................................................................... 6 2.6 Support Equipment List and Description .................................................................... 6 3.0 Emission Results ......................................................................................................... 8 3.1 Radiated Test Results ................................................................................................ 9 3.1.1 Field Strength Calculation ....................................................................................... 9 3.1.2 Radiated Emission Configuration Photograph....................................................... 10 3.1.3 Radiated Emissions............................................................................................. 10 3.1.4 Transmitter Spurious Emissions (Radiated) .......................................................... 12 4.0 Equipment Photographs ........................................................................................... 15 5.0 Product Labelling....................................................................................................... 17 6.0 Technical Specifications ........................................................................................... 19 7.0 Instruction Manual ..................................................................................................... 21 8.0 Miscellaneous Information........................................................................................ 23 8.1 Measured Bandwidth................................................................................................ 24 8.2 Discussion of Pulse Desensitization......................................................................... 25 8.3 Calculation of Average Factor .................................................................................. 25 8.4 Emissions Test Procedures...................................................................................... 26 8.4 Emissions Test Procedures (cont'd) ......................................................................... 27 9.0 Test Equipment List................................................................................................... 29 TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 iii

INTERTEK TESTING SERVICES List of attached file Exhibit type File Description Filename Test Report Test Report report.pdf Test Setup Photo Radiated Emission radiated photos.pdf Test Report 20dB BW Plot bw.pdf External Photo External Photo external photos.pdf Internal Photo Internal Photo internal photos.pdf Block Diagram Block Diagram block.pdf Schematics Circuit Diagram circuit.pdf Operation Description Technical Description descri.pdf ID Label/Location Label Artwork and Location label.pdf User Manual User Manual manual.pdf Test Report Average Factor af.pdf Cover Letter Letter of Agency agency.pdf TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 iv

INTERTEK TESTING SERVICES EXHIBIT 1 GENERAL DESCRIPTION TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 1

INTERTEK TESTING SERVICES 1.0 General Description 1.1 Product Description The Equipment under Test (EUT) is a Remote Controller of Electric Smoker operating at 2.4GHz band which is used for cooking and outdoor used only. The EUT was powered by DC 3.0V (2*1.5V “AAA” Batteries). For more information, pls. refer to the user manual. . Antenna Type: Integral antenna Type of modulation: FSK The Model: 20072512, 20072612, 20072712, 20072812, 20073012, 20070312, 20072112, 20072212, 20072312, 20072412 and 20072912 are the same as the Model: 20070512 in hardware aspect. The difference in model number serves as marketing strategy. For electronic filing, the brief circuit description is saved with filename: descri.pdf. 1.2 Related Submittal(s) Grants This is an application for certification of a transceiver for Remote controller of the Electric Smoker with RF, and there has a host which associated with this EUT, has FCC ID: YHXESQ-3040C4 and has been filed at the same time. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 2

INTERTEK TESTING SERVICES 1.3 Test Methodology Radiated emission measurement was performed according to the procedures in ANSI C63.4 (2009). Radiated Emission measurement was performed in a Semi-anechoic chamber. Preliminary scans were performed in the Semi- anechoic chamber only to determine worst case modes. For each scan, the procedure for maximizing emissions in Appendices D and E were followed. All Radiated tests were performed at an antenna to EUT distance of 3 meters, unless stated otherwise in the "Justification Section" of this Application. 1.4 Test Facility The Semi-Anechoic chamber used to collect the radiated data is Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch and located at 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China. This test facility and site measurement data have been fully placed on file with the FCC (Registration Number: 242492). TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 3

INTERTEK TESTING SERVICES EXHIBIT 2 SYSTEM TEST CONFIGURATION TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 4

INTERTEK TESTING SERVICES 2.0 System Test Configuration 2.1 Justification The system was configured for testing in a typical fashion (as a customer would normally use it), and in the confines as outlined in ANSI C63.4 (2009). The EUT was powered by 2*1.5V “AAA” new batteries during the testing. For maximizing emissions below 30 MHz, the EUT was rotated through 360°, the centre of the loop antenna was placed 1 meter above the ground, and the antenna polarization was changed. For maximizing emission at and above 30 MHz, the EUT was rotated through 360°, the antenna height was varied from 1 meter to 4 meters above the ground plane, and the antenna polarization was changed. This step by step procedure for maximizing emissions led to the data report in Exhibit 3.0. The unit was operated standalone and placed in the centre of the turntable. The equipment under test (EUT) was configured for testing in a typical fashion (as a customer would normally use it). The EUT was placed on a turn table, which enabled the engineer to maximize emissions through its placement in the three orthogonal axes. 2.2 EUT Exercising Software The EUT exercise program (provided by client) used during radiated testing was designed to exercise the various system components in a manner similar to a typical use. The worst case configuration is used in all specified testing. The parameters of test software setting: During the test, Channel and power controlling software provided by the applicant was used to control the operating channel as well as the output power level. The RF output power selection is for the setting of RF output power expected by the application and is going to be fixed on the firmware of the end product. 2.3 Special Accessories There is no special accessories necessary for compliance of this product. . TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 5

INTERTEK TESTING SERVICES 2.4 Equipment Modification Any modifications installed previous to testing by Masterbuilt Manufacturing, Inc. will be incorporated in each production model sold / leased in the United States. No modifications were installed by Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch. 2.5 Measurement Uncertainty When determining the test conclusion, the Measurement Uncertainty of test has been considered. 2.6 Support Equipment List and Description There is no support Equipment necessary for compliance of this product. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 6

INTERTEK TESTING SERVICES EXHIBIT 3 EMISSION RESULTS TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 7

INTERTEK TESTING SERVICES 3.0 Emission Results Data is included worst-case configuration (the configuration which resulted in the highest emission levels). TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 8

INTERTEK TESTING SERVICES 3.1 Radiated Test Results A sample calculation, configuration photographs and data tables of the emissions are included. 3.1.1 Field Strength Calculation The field strength is calculated by adding the reading on the Spectrum Analyzer to the factors associated with preamplifiers (if any), antennas, cables, pulse desensitization and average factors (when specified limit is in average and measurements are made with peak detectors). A sample calculation is included below. FS = RA + AF + CF - AG + PD + AV Where FS = Field Strength in dBµV/m RA = Receiver Amplitude (including preamplifier) in dBµV CF = Cable Attenuation Factor in dB AF = Antenna Factor in dB AG = Amplifier Gain in dB PD = Pulse Desensitization in dB AV = Average Factor in -dB In the radiated emission table which follows, the reading shown on the data table may reflect the preamplifier gain. An example of the calculations, where the reading does not reflect the preamplifier gain, follows: FS = RA + AF + CF - AG + PD + AV Assume a receiver reading of 62.0 dBµV is obtained. The antenna factor of 7.4 dB and cable factor of 1.6 dB is added. The amplifier gain of 29 dB is subtracted. The pulse desensitization factor of the spectrum analyzer was 0 dB, and the resultant average factor was -10 dB. The net field strength for comparison to the appropriate emission limit is 32 dBµV/m. This value in dBµV/m was converted to its corresponding level in µV/m. RA = 62.0 dBµV AF = 7.4 dB CF = 1.6 dB AG = 29.0 dB PD = 0 dB AV = -10 dB FS = 62 + 7.4 + 1.6 - 29 + 0 + (-10) = 32 dBµV/m Level in µV/m = Common Antilogarithm [(32 dBµV/m)/20] = 39.8 µV/m TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 9

INTERTEK TESTING SERVICES 3.1.2 Radiated Emission Configuration Photograph For electronic filing, the worst case radiated emission configuration photograph is saved with filename: radiated photos. pdf. 3.1.3 Radiated Emissions The data on the following page lists the significant emission frequencies, the limit and the margin of compliance. Numbers with a minus sign are below the limit. Worst Case Radiated Emission at 720.483 MHz Judgement: Passed by 13.2 dB TEST PERSONNEL: Sign on file Leo Lai, Engineer Typed/Printed Name 18 July, 2012 Date TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 10

INTERTEK TESTING SERVICES Applicant: Masterbuilt Manufacturing, Inc. Date of Test: 18 July, 2012 Model: 20070512 Sample: 1/1 Worst Case Operating Mode: Transmit Table 1 Radiated Emissions Polarization Frequency Reading Pre- Antenna Net Limit Margin (MHz) (dBµV) Amp Factor at 3m at 3m (dB) Gain (dB) (dBµV/m) (dBµV/m) (dB) Horizontal 32.590 26.6 20.0 17.9 24.5 40.0 -15.5 Horizontal 182.370 24.8 20.0 16.0 20.8 43.5 -22.7 Horizontal 420.598 27.6 20.0 23.6 31.2 46.0 -14.8 Vertical 55.390 28.6 20.0 16.0 24.6 40.0 -15.4 Vertical 202.356 24.9 20.0 16.3 21.2 43.5 -22.3 Vertical 720.483 29.2 20.0 23.6 32.8 46.0 -13.2 NOTES: 1. Quasi-Peak detector is used except for others stated. 2. All measurements were made at 3 meters. Harmonic emissions not detected at the 3-meter distances were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative value in the margin column shows emission below limit. 4. All emissions are below the QP limit. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 11

INTERTEK TESTING SERVICES 3.1.4 Transmitter Spurious Emissions (Radiated) The data on the following page lists the significant emission frequencies, the limit and the margin of compliance. Numbers with a minus sign are below the limit. Worst Case Radiated Emission at 7320.000 MHz Judgement: Passed by 17.6 dB TEST PERSONNEL: Sign on file Leo Lai, Engineer Typed/Printed Name 18 July, 2012 Date TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 12

INTERTEK TESTING SERVICES Applicant: Masterbuilt Manufacturing, Inc. Date of Test: 18 July, 2012 Model: 20070512 Sample: 1/1 Worst Case Operating Mode: Transmit Table 2 Radiated Emissions (2440.000MHz) Polarization Frequency Reading Pre- Antenna Net Peak Limit Margin (MHz) (dBµV) Amp Factor at 3m at 3m (dB) Gain (dB) (dBµV/m) (dBµV/m) (dB) Horizontal 2399.035 61.3 36.7 28.5 53.1 74.0 -20.9 Horizontal 2440.000 93.1 36.7 28.5 84.9 114.0 -29.1 Horizontal 2483.813 62.9 36.7 28.5 54.7 74.0 -19.3 Horizontal 7320.000 58.5 36.7 34.6 56.4 74.0 -17.6 Polarization Frequency Reading Pre- Antenna Average Net Average Limit Margin (MHz) (dBµV) Amp Factor Factor at 3m at 3m (dB) Gain (dB) (-dB) (dBµV/m) (dBµV/m) (dB) Horizontal 2399.035 61.3 36.7 28.5 26.0 27.1 54.0 -26.9 Horizontal 2440.000 93.1 36.7 28.5 26.0 58.9 94.0 -35.1 Horizontal 2483.813 62.9 36.7 28.5 26.0 28.7 54.0 -25.3 Horizontal 7320.000 58.5 36.7 34.6 26.0 30.4 54.0 -23.6 Notes: 1. Peak detector Data unless otherwise stated. 2. All measurements were made at 3 meter. Harmonic emissions not detected at the 3-meter distance were measured at 0.3-meter and an inverse proportional extrapolation was performed to compare the signal level to the 3-meter limit. No other harmonic emissions than those reported were detected at a test distance of 0.3-meter. 3. Negative value in the margin column shows emission below limit. 4. Horn antenna is used for the emission over 1000MHz. Test Engineer: Leo Lai TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 13

INTERTEK TESTING SERVICES EXHIBIT 4 EQUIPMENT PHOTOGRAPHS TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 14

INTERTEK TESTING SERVICES 4.0 Equipment Photographs For electronic filing, the photographs of the tested EUT are saved with filename: external photos.pdf & internal photos.pdf. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 15

INTERTEK TESTING SERVICES EXHIBIT 5 PRODUCT LABELLING TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 16

INTERTEK TESTING SERVICES 5.0 Product Labelling For electronic filing, the FCC ID label artwork and the label location are saved with filename: label.pdf. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 17

INTERTEK TESTING SERVICES EXHIBIT 6 TECHNICAL SPECIFICATIONS TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 18

INTERTEK TESTING SERVICES 6.0 Technical Specifications For electronic filing, the block diagram and schematics of the tested EUT are saved with filename: block.pdf and circuit.pdf respectively. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 19

INTERTEK TESTING SERVICES EXHIBIT 7 INSTRUCTION MANUAL TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 20

INTERTEK TESTING SERVICES 7.0 Instruction Manual For electronic filing, a preliminary copy of the Instruction Manual is saved with filename: manual.pdf. This manual will be provided to the end-user with each unit sold/leased in the United States. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 21

INTERTEK TESTING SERVICES EXHIBIT 8 MISCELLANEOUS INFORMATION TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 22

INTERTEK TESTING SERVICES 8.0 Miscellaneous Information This miscellaneous information includes details of the measured bandwidth and the test procedure. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 23

INTERTEK TESTING SERVICES 8.1 Measured Bandwidth Pursuant to FCC part 15 Section 15.215(c), the 20dB bandwidth of the emission was contained within the frequency band designated (mentioned as above) which the EUT operated. The effects, if any, from frequency sweeping, frequency hopping, other modulation techniques and frequency stability over excepted variations in temperature and supply voltage were considered. Figure 8.1 Bandwidth TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 24

INTERTEK TESTING SERVICES 8.2 Discussion of Pulse Desensitization The determination of pulse desensitivity was made in accordance with Hewlett Packard Application Note 150-2, Spectrum Analysis ... Pulsed RF. The effective period (Teff) was approximately 5.04 ms for a digital "1" bit, as shown in the plots of Exhibit 8.3. With a resolution bandwidth (3 dB) of 100 kHz, the pulse desensitivity factor was 0 dB. 8.3 Calculation of Average Factor Averaging factor in dB = 20 log (duty cycle) The specification for output field strengths in accordance with the FCC rules specify measurements with an average detector. During testing, a spectrum analyzer incorporating a peak detector was used. Therefore, a reduction factor can be applied to the resultant peak signal level and compared to the limit for measurement instrumentation incorporating an average detector. The time period over which the duty cycle is measured is 100 milliseconds, or the repetition cycle, whichever is a shorter time frame. The worst case (highest percentage on) duty cycle is used for the calculation. The duty cycle is measured by placing the spectrum analyzer in zero scan (receiver mode) and linear mode at maximum bandwidth (3 MHz at 3 dB down) and viewing the resulting time domain signal output from the analyzer on a Tektronix oscilloscope. The oscilloscope is used because of its superior time base and triggering facilities. A plot of the worst-case duty cycle as detected in this manner are saved with filename: af.pdf The duty cycle is simply the on-time divided by the period: The duration of one cycle = 404.00ms > 100.00ms Effective period of the cycle = 5.04ms x 1 = 5.04ms DC = 5.04ms / 100.00ms = 0.05 or 5% Therefore, the averaging factor is found by 20 log10 0.05 = -26.0 dB TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 25

INTERTEK TESTING SERVICES 8.4 Emissions Test Procedures The following is a description of the test procedure used by Intertek Testing Services in the measurements of transmitters operating under Part 15, Subpart C rules. The test set-up and procedures described below are designed to meet the requirements of ANSI C63.4 - 2009. The transmitting equipment under test (EUT) is placed on a wooden turntable which is four feet in diameter and approximately one meter in height above the ground plane. During the radiated emissions test, the turntable is rotated and any cables leaving the EUT are manipulated to find the configuration resulting in maximum emissions. The EUT is adjusted through all three orthogonal axes to obtain maximum emission levels. The antenna height and polarization are varied during the testing to search for maximum signal levels. Detector function for radiated emissions above 1GHz is in peak mode and Quasi-Peak mode is used below 1GHz. The frequency range scanned is from the lowest radio frequency signal generated in the device which is greater than 9 kHz to the tenth harmonic of the highest fundamental frequency or 40 GHz, whichever is lower. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 26

INTERTEK TESTING SERVICES 8.4 Emissions Test Procedures (cont'd) The EUT is warmed up for 15 minutes prior to the test. AC power to the unit is varied from 85% to 115% nominal and variation in the fundamental emission field strength is recorded. If battery powered, a new, fully charged battery is used. Conducted measurements are made as described in ANSI C63.4 - 2009. The IF bandwidth used for measurement of radiated signal strength was 10 kHz for emission below 30 MHz and 120 kHz for emission from 30 MHz to 1000 MHz. Above 1000 MHz, a resolution bandwidth of 1 MHz is used. Transmitter measurements are normally conducted at a measurement distance of three meters. However, to assure low enough noise floor in the restricted bands and above 1 GHz, signals are acquired at a distance of one meter or less. All measurements are extrapolated to three meters using inverse scaling, but those measurements taken at a closer distance are so marked. TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 27

INTERTEK TESTING SERVICES EXHIBIT 9 TEST EQUIPMENT LIST TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 28

INTERTEK TESTING SERVICES 9.0 Test Equipment List Equipment Equipment Manufacturer Model No. Serial No. Cal. Date Due Date No. BiConiLog SZ061-03 ETS 3142C 00066460 30-Jun-12 30-Jun-13 Antenna EMI SZ185-01 R&S ESCI 100547 11-Mar-12 11-Mar-13 Receiver Horn SZ061-08 ETS 3115 00092346 15-Oct-11 15-Oct-12 Antenna Active Loop SZ061-06 Electro-Metrics EM-6876 217 11-Mar-12 11-Mar-13 Antenna Spectrum SZ056-03 R&S FSP 30 101148 11-Mar-12 11-Mar-13 Analyzer SZ181-04 Preamplifier Agilent 8449B 3008A02474 11-Mar-12 11-Mar-13 Anechoic RFD-F/A- SZ188-01 ETS 4102 03-Mar-12 03-Mar-13 Chamber 100 SZ062-02 RF Cable RADIALL RG 213U -- 17-Mar-12 17-Sep-12 0.04- SZ062-06 RF Cable RADIALL -- 01-Nov-11 01-Nov-12 26.5GHz 0.04- SZ062-12 RF Cable RADIALL -- 25-Feb-12 25-Aug-12 26.5GHz BRM5070 SZ067-04 Notch Filter Micro-Tronics -- 11-Jun-12 11-Jun-13 2-02 TRF No.: FCC 15C_TX_b FCC ID: YHXESQ-3040R4 Report No.: SZ12070003-2 29


Document Created: 2012-08-13 20:13:31
Document Modified: 2012-08-13 20:13:31
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC