SAR report part 2

FCC ID: YHLBLUPUREVIEW

RF Exposure Info

Download: PDF
FCCID_3673542

Add No 31 Xueu Rond.Haldan Diwic, Meling, 100191,China Tecou—loduoieisa... recoreloanoimasot E—nalb tistileon Htpshnnuctination Client Sporton—CN Cortificate No: 216—07224 osisst pessvz—Sh adté2 Calibration Procedure(s) rozn Callbration Procedures for dipole validation ks Calibration date: November 22, 2016 This calbration Certficate documents the traceabilty to national standards, which realize the physical units of measurements(S). The measurements and the uncertainies wih confidence probabty are given on the folowing pages andare part of certficate. All eallations have been conducted in the clased laboratory faciity: environment temperature@zsa)©. and humidity<70%. Calibration Equipment used (MBTE crtical for calbration) Primary Standards To# Gal Date(Calbrated by. Certficate No) Scheduled Calbration Power Meter NRP2 101919 27—Jun—16 (CTTL, No.J16X04777) Jun17 Power sensor NRP—201 101547 27—Jjun—16 (CTTL, NoJ16X04777) Junt7 Reference Probe EXIDV4 SN 7433 26—Sep—16(SPEAGNo.EX3—7433_Sep16) Sep—17 DaEd SN77 02—Feb—16(CTTL—SPEAGNo216—97011) Fob17 Secondary Standards D# Cal Date(Calibrated by. Cortficate No Scheduled Calbration Signal Generator E438C MY49071430 Ot—Feb—16 (CTTL NoJ1GX00803) Jan17 Network Analyzer E071C MY4G110673 26—/an—16 (CTTL, NoJ16X00804) Jan17 Name Function Signature Catbrated by: ‘ZhaoJing SAR TestEngineer {4 Roviewed by: i Dianyuan SAR Project Leader t+—eh Anptoved by: Lu Bingsong Deputy Director ofthe aboratory ElmFl Issued: November 26, 2016 This callbration corficate shall not be reproduced excapt n full without witten approval ofthe laboratory. Cerificate No: 216—97224 Page i ofs

» in Colabonation win ‘TT2 Infrninniant Ald: No Xueyua Road,Hsidan Ditic, eling 100121, China Tok m1030607 rncobInasdieis2s0t E—nall ctlitchinatlcom Hipshrimchinatien Glossary: TSL tissue simulating liquid Conve sensitvily in TSL / NORMxyz N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Sid 1528—2013, IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques®, June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)*, February 2005 c) IEC 62209—2, Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of OMHz to 6GHz)®, March 2010 d) KDBB65664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Modl Applied and Interprotation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certficate. Allfigures stated in the certificate are valld at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallelto the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid file phantom. The impedance stated is transformed from the measurementat the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay betweenthe SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distrbution Corresponds to a coverage probabilty of approximately 95%. Cenifieate No: 21697224 Pagea ofs

«in Cotaboridonwith TTL causrmon asoratore Add No 31 Xuewne Rand. dn Divic, eiing, 100091,Chin Teb oincimaouen0m recom—Onioientsot Enai:etidshiattcom Hhipitohinaten Measurement Conditions DASY system contiquration, asfa as no gven on page 1. DASYVarsion nasyse sess iess Extrapotation Advanced Extapolaton Phantom ie Flat Phantom 5.1C Distance Dipolo Center— TL 15 mm wit Spacer Zoom Sean Resolution o dy, de =5 mm Frequeney 838 Nblex 1 Mz Head TSL paramotors Te folowing parameters and calcuaions were appled. Temporature Pormitivity Conductiiy Nominal Hoad TSL paramoters 220°0 «is 00 maim Measured Head TSL paramaters @zoz02)C 41426% 082 mhoin+6% Head TSL temporature change during test| <1.0 °C . z. SAR result with Hoad TSL SAR averaged over 1_cm" (1 9 of Head TSl Gondtion SAR measured 250 mW inout power 236 mW /o SA for nominal Head TL parametors notmatize to 17| 9.31 mW ig£ 20.8 % (ee2) SAR averaged over 10 on‘ (10g) of Head TSL Coniton SAR measured 250 mW inout power 155 mw1a SAR fornominal Hoad TSL parametars normaliza to 1W 6218 mWg 204 (kea) Body TSL paramoters ‘The folowing parameters and calcuaions were appled. Temperature Pormitivity Conductiity Nominal Body TSL parameters 220°c sez 097 mhaim Measured Body TSL paramotors ga0202°c se220% |oo§ mhoma6% Body TSL temporature change during test| . <1.0°C | s = SAR result with Body TSL SA averaged over 1_cm"_(t ) of Body TSL Condion SAR measured 280 mW inout power 230mW1g SA fornominal Body TS paramoters normalied to 1W 9.64 mW ig220.8% (Ket) BAR averaged over 10 on (109) of Body TSL Condion SAR measured 250 m inout power 150 mW/a SAR fornorinal Body TSt paramaters normalid to 1W 62tt mW ig 22044 % (l2) Cenificate No: 21697224 Paged ofs

TTL $.8.8.2.83— Add: NoXueyian Road,Hldan Distic,Ring 100.9; Chiow Te ie—oamoteisaim recoreoamoienastt E—nal: at/actinaticon Hhipvwchinaton Appendix Antenna Paramoters with Head TSL Impedance,ranstormed to feed point ston—2.130 Relum Loss —s2608 Antenna Parameters with Body TSL Impedance, ranstormed to feed point «s00—3530 Retun Loss «arran General Antenna Parameters and Design Electical Delay (one drection) 1328 ns After long term use with 100W radated power, only a slght warming of the dipole near the feedpoint can be measured. The dipole is made of standard semrigid connial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore shor—cireuited for DC—signals. On some of the dipoles, smal end caps are added to the dipole arms in order to improve matching when loaded according to the postion as explained in the "Measurement Condiions" paragraph. The SAR data are not affected by this change. The overalldipole length is stll according to he Standard. No excessive force must be applied tothe dipole arms, because they might band orthe soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by sreas Centlicate No: 21697224 Page ofs

Add: No 1 XueyuaRoad, aidan Disic eling 100791, China Te sinsemotssa000 recoviOemsoiene2stt Emal:c@chinattcon Hipetionchination DASYS Validation Report for Head TSL Dat: 11222016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 835 MHz; Type: D83SV2; Serial: DS35V2 — SN: dd162 Communication System: UID 0, CW; Frequeney: 835 MHz; Duty Cycl Medium parameters used: {= 835 MHz; 0 = 0.916 Sim; 5 =41.41; p= 000 ka/m‘ Phantom section: Center Section Measurement Standard: DASY5 (IEEEAEC/ANSL C63.19—2007) DASYS Configuration: + Probe: EX3DV4 — SN7433; ConvR(9.42, 9.82, 9.82); Calibrated: 9/26/2016; * Sensor—Surface: 2mm (Mechanical Surface Detection) * Electronies: DAE4 Sn771; Calibrated: 2202016 + Phantom: Triple Flat Phantom 5.1 ype: QD 000 PSI CA; Serial: L161 + Measurement SW: DASY32, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: the=Smm, dy—Smm, d=Smm Reference Value = 58.15V/m; Power Drift =—0.00 dB Peak SAR (extrapolated) =3.53 Wikg SARQ g) =2.36 Wikg: SAR(1O g) = 1.88 Whkg Maximum value ofSAR (measured) = 3.00 W/kg 210 ~A20 430 «.40 0 dB =3,00 Whkg=4.77 dBWikg Corifieate No: 71697224 Page sors

«. inCotaboradonwith a causmamon tasorarory AdNo1 Xuemn Rowd uin Dbnle, en 100191,China eb onianadusinin es enbOAmidiis2sot E—mal: cti@chiatlcon Hiphnchinanien Impedance Measurement Plot for Head TSL Te mt c way sa: oo wer scomes t 990 rer—encom w crcire an wnice 1.00 w tnee o0 a cce & caoico o0 ce cce + i seten geep seate 2.0000 [rs oetl w mc me. si.dio n azsr e nm Certficate No: 21697224 Pageéofs

Add o 31 Xueyua onl Haidan Divic, Beljng,100191, China Tok se iamsoreas ts recone—IOctsoieisasat Emal: ctlchisatlcon Hiphrwnchiation DASVS Validation Report for Body TSL Date: 11222016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 835 MHz; Type: D83SV2; Serial: DB3SV2 — SN; 4d162 CommunicationSystem: UID 0, CW; Frequeny: 835 Mz: Duty Cycle: 1:1 Medium parameters used: {= 835 MHz; =0.954 S/m; s, = 54.22; p = 1000 ka/m‘ Phantom section: Left Section Measurement Standard: DASYS (IEEEAEC/ANST C63.19—2007) DASY5 Configuration: + Probe: EX3DV4 — SN7433; ConvR@.5,0.5, 9.5); Calibrated: 9/262016; +« Sensor—Surface: 2mm (Mechanical Surface Detection) + Electronics: DAEA Sn77l; Calibrated: 222016 + Phantom: Triple Flat Phantom 5.1C; Type: QD 000 PS1 CA; Serial 116171 +« Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Sean (7x7x7) (7x7x7)/Cube 0: Measurement grid: dic=Smm, dy=Smm, de=Smm Reference Value = 56.01 V/m; Power Drift= —0.05 dB Peak SAR (extrapolated) =3.48 Whke SAR(L ) =2.39 WSAR(LO g) = 1.59 Wikg Maximurn value of SAR (measured) =2.99 W/kp —1.90 4.96 se3 48 L. 408 0 dB =2.99 Wikg=4.76 dBWkg Centficate No: 21697224 Page rors

«in Cataboridonvith ZL Snfmizime— Add No 31 Xuesom Rond Hsidan Diaic, Heling, 100191, China Telos0—imsdret2 P enIoamadiiis2304 Emal:il@ciinat.con Hitpihonschinatten Impedance Measurement Plot for Body TSL ver m t ray 10— ty war ccomne DT 909 rar—airoiit we —ce en anise we 100 u00 scose .0 .0 .00 casco mc vim sis setch (nei) scate 2.000 (rs oet) m am.oo ma dnoir e xm o. ggoe Corlfieate No: 21697224 Page t ofs

r“ In Collaboration with io a SAE am‘ PBEi.n e=‘/ V "[‘], CALIBRA s_pTIONeLABORAT a ORYq .w‘ CN AFAW AS N Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China {,///T\\ N& CALIBRATION Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 ArlalubsS" CNAS LO570 E—mail: cttl@chinattl.com http://www.chinattl.cn Client Sporton Certificate No: 217—97067 CALIBRATION CERTIFICATE Object D1750V2 — SN: 1137 Calibration Procedure(s) FD—211—003—01 Calibration Procedures for dipole validation kits Calibration date: June 5, 2017 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)‘C and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Power sensor NRP—Z91 101547 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Reference Probe EX3DV4 SN 3617 23—Jan—17(SPEAG,No.EX3—3617_Jan17) Jan—18 DAE4 SN 771 19—Jan—17(CTTL—SPEAG,No.Z17—97016) Jan—18 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Signal Generator E4438C MY49071430 13—Jan—17 (CTTL, No.J17X00286) Jan—18 Network Analyzer E5071C MY46110673 13—Jan—17 (CTTL, No.J17X00285) Jan—18 Name Function Signature Calibrated by: Zhao Jing SAR Test Engineer gi/ Reviewed by: Lin Hao SAR Test Engineer ’)fi{\%j Approved by: Qi Dianyuan SAR Project Leader t o Issued: June 9, 2017 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z17—97067 Page 1 of 8

&7T7Tr s pe a 9 CALIBRATION LABORATORY ‘/ Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.cn Glossary: TSL tissue simulating liquid ConvrF sensitivity in TSL / NORMx,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209—2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: Thedipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z17—97067 Page 2 of 8

® In Collaboration with a=®‘/"/"J, s_CALIBRATION p__e_LABORATORY a 9 agey Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.en Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY52 52.10.0.1442 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1C Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 1750 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 40.1 1.37 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 39.7 +6 % 1.36 mho/m + 6 % Head TSL temperature change during test <1.0 °C ———— SAR result with Head TSL SAR averaged over 1 Cm?° (1 g) of Head TSL Condition SAR measured 250 mW input power 9.13 mW / g SAR for nominal Head TSL parameters normalized to 1W 36.6 mW /g + 18.8 % (k=2) SAR averaged over 10 cm> (10 g) of Head TSL Condition SAR measured 250 mW input power 4.84 mW / g SAR for nominal Head TSL parameters normalized to 1W 19.4 mW 1g + 18.7 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 53.4 1.49 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 53.3 +6 % 1.50 mho/m + 6 % Body TSL temperature change during test <1.0 °C SAR result with Body TSL SAR averaged over 1 cm> (1 g) of Body TSL Condition SAR measured 250 mW input power 9.31 mW / g SAR for nominal Body TSL parameters normalized to 1W 37.0 mW 1g + 18.8 % (k=2) SAR averaged over 10 cm> (10 g) of Body TSL Condition SAR measured 250 mW input power 4.95 mW / g SAR for nominal Body TSL parameters normalized to 1W 19.7 mW 1g + 18.7 % (k=2) Certificate No: Z17—97067 Page 3 of 8

im ® In Collaboration with w‘/"/"J, s_ p_ c CALIBRATION LABORATORY y Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.cn Appendix (Additional assessments outside the scope of CNAS LO570) Antenna Parameters with Head TSL Impedance, transformed to feed point 49.20+ 0.11 jQ Return Loss — 41.5 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 44.40— 1.13 jQ Return Loss — 24.3 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.330 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Z17—97067 Page 4 of 8

im: in Collaboration with a‘/"/"J, s_ p__e_ a q CALIBRATION LABORATORY y Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.en DASY5 Validation Report for Head TSL Date: 06.05.2017 Test Laboratory: CTTL, Beijing, China DUT : Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 — SN: 1137 Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1:1 Medium parameters used: f= 1750 MHz; 0 = 1.358 S/m; sr = 39.69; p = 1000 kg/m3 Phantom section: Right Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN3617; ConvF(8.49, 8.49, 8.49); Calibrated: 1/23/2017; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn771; Calibrated: 1/19/2017 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.10 (0); SEMCAD X Version 14.6.10 (7413) System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 93.47V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 16.9W/kg SAR(I g)=9.13 W/kg; SAR(10 g) = 4.84 W/kg Maximum value of SAR (measured) = 14.1 W/kg dB 0 —3.42 —6.84 —10.25 —13.67 ol —17.09 0 dB =14.1 W/kg = 11.49 dBW/kg Certificate No: Z17—97067 Page 5 of 8

® In Collaboration with aw®‘/"/"‘J, 2@ CALIBRATION LABORATORY y Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plot for Head TSL Tri s1i1 Log Mag 10.00d8/ Ref 0.000d8 [F1] 58.00 »L 1.7500000 GHz —41.470 ds 40. 00 30. 00 20. 00 10. 00 0. 000 p| € —10. 00 —20. 00 —30. 00 —40, 00 —50. 00 k rIWs s1ii smith (R+jX) scale 1.000U [F1 del] »1 1.7500000 GHz 49.170 t 111.75 me 10.1 Certificate No: Z17—97067 Page 6 of 8

im ® In Collaboration with a‘/"/"J, s_ p__e_ a q CALIBRATION LABORATORY y Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http:/www.chinattl.en DASY5S Validation Report for Body TSL Date: 06.05.2017 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 — SN: 1137 Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1:1 Medium parameters used: f= 1750 MHz; 0 = 1.503 S/m; s = 53.27; p = 1000 kg/m3 Phantom section: Left Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C€63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN3617; ConvF(8.21, 8.21, 8.21); Calibrated: 1/23/2017; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn771; Calibrated: 1/19/2017 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.10 (0); SEMCAD X Version 14.6.10 (7413) System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.52 V/m; Power Drift = 0.04 dB Peak SAR (extrapolated) = 16.6 W/kg SAR(1 g) =9.31 W/kg; SAR(10 g) =4.95 W/kg Maximum value of SAR (measured) = 14.2 W/kg dB 0 —3.27 —6.54 —9.80 —13.07 y —16.34 0 dB = 14.2 W/kg = 11.52 dBW/kg Certificate No: Z17—97067 Page 7 of 8

_ifi© in Collaboration with a_‘/"/‘J, a wimazyy»~ CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.cn Impedance Measurement Plot for Body TSL Tri s11 Log Mag 10.00dB/ Ref 0.000d8 [F1] so—C0 »1 1.7500000 GHz —24.310 ds 40. 00 30. 00 20. 00 10. 00 0. 000 p ¢ —10. 00 —20, 00 —30. 00 ~40. 00 —50, 00 PIWs s11 smith (R+jX) scale 1.000U [F1 Del] »L 1.7500000 GHz 44.367 n —1.1336 n 80.22 ’\ Certificate No: Z17—97067 Page 8 of 8

Add: NoS1 Xuywan RantHidan Dowvit, Beiing, 100191 Chin tasone—ioemoinsamh recossioanoionastt E—nal:ctlchinattcom Hitnlboosctinatien Client Sporton—CN Cortificate No: ¢ Object 19002 — SN sd182 Calibration Procedure(s) sppmuan Calibration Procedures for dipole valldation ts Calbration date: November 24, 2016 This caltbration Certficate documents the raceabilty to national standards, which realize the physical unis of measurements(S). The measurements and the uncertainies wih confidence probabiity are given on the following pages and are part ofthe certficals. All calbrations have been conducted in the elosed laboratary facifty: environment temperature@2s3)© and humidiy<70%. Callbration Equipment used (MBTE criical for calration) Primary Standards D# Gal Date(Calbrated by, Contficale No) Scheduled Calbration Power Meter NREZ 101010 27—Jun—16 (CTTL, NoJ16X04777) Jun—t7 Power sensor NRP—201 101547 27—Jun—16 (CTTL, NoJ16X04777) Junt7 Reference Probe EX3DV SN 7433 26—Sep—16(GPEAGNo.EX3—7433_Sep16) Sep—17 Daed SN77 02—Feb—16(CTTL—SPEAGNo216—07011) Fob—17 Secondary Standards 10# Cal Date(Galibrated by, Corticate No) Scheduled Caltbration Signal Generator Ed438C MY49071430 Ot—Feb—16 (CTTL, NoJ16X00893) Jan—t7 Notwork Analyzer ESO71C MY4G110673 26—Jan—16 (CTTL, No.J1GX00804) Jane17 Name Function Signature dattiatsd by: ZhaoJing ‘SARTest Engineer -&l{ Ioviewest by: 0i Dianywan SAR Project Leader Avproved fy: LuBingsong Deputy Director oft laboratory IQ Issued; November 27, 2016 This calloration certficate shallnot be repraduced except in full whout witen approval ofthe laboratory. Conifieate No: 21697230 Page i ofs

* in Cotabombicnwith causramon taporarory AddNoS1 Xoeyumn Rontthidan Datric, Beljng, 100191,China Teo ineasonessome recose—loamoieisasct E—mal: cti@chinttcom Hapehrincchinatien Glossary: TSL issue simulating liquid ConvF sensitvily in TSL / NORMcy.z NA not applicable or not measured Callbration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques®, June 2013 b) IEC 62200—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300Mz to 3GHz)*, February 2005 ) IEC 62209—2, *Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to GGHz)®, March 2010 d) KDBBG5664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/S System Handbook Methods Applied and Interprotation of Parameters: * Measurement Conditions: Further details are available from the Validation Report at the end of the certficate. Allfigures stated in the certiicate are valid at the frequency indicated. * Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. * Feed Point Impedance and Retur Loss: These parameters are measured with the dipole positioned under the liquid filed phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. « Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. + SAR measured: SAR measured at the stated antenna input power, + SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. * SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distrbution Corresponds to a coverage probabiliy of approximately 95%. Cerifate No: 21647230 Pageaofs

7TTL a Add No S1 Xueywan Roa, aldian Diric,Beiig, 100191 Chna Telside—Ibemoress.9 rwcome—loaaioiessasot E—nal:etlchiantcom Hophrencatiatien Measurement Conditions DASY system confuraton.asfar as not given on page 1. DASY version oasvse sensi2se Extrapolation Advanced Extrapolation Phantom Tiple Flat Phantom 5.1C Distance Dipole Center— TSL 10mm with Spacer Zoom Sean Resolution oidy. dz =$ mm Frequency 1900 mites 1 ie Head TSL paramotors ‘The foloving parameters and calcualons were appled Temporature Pormitivity Conductiviy Nominal Head TSL paramoters mo‘e «o 140 mhoim Measured Hoad TSL paramaters gzoz02‘c 40426% 143 mom#6% Head TSL tomporature change during test| <1.0°C — — SAR result with Head TSL SA averaged over1_cm° (t g) of Hond TSl Condtion SAR measured 250 mW inout power 104 nWig SAR fornominal Head TSL paramotars normalicd to 1W 40.0 mW ig£ 20. % (eet) SA averaged over 10 cnr‘_(109) of Hoad TSL Condtion SAR measured 250 mW input power 523 mW1q SA fornominal Head TSL paramotars normalize to 1W 20. mW ty 204 % (ke2) Body TSL paramoters The faloving parameters and calculatons were appled. Temporature Pormitivity Conductiviy Nominal Body TSL parameters zo‘e sas 182 mhoim Measured Body TSL parametors @z0202) ssr0% 183 mhoim +6 % Body TSL temperature change during test| <1.0°C = _ SAR result with Body TSL SAR averaged over 1 cm" (1g)of Body TSL Condton SAR measured 250 mW inout power 1o2mw!o SAR fornominal Body TSL parameters notmalizeto 1W 40. mW 7y 20.8 % (ke2) SAR averaged over 10 on‘ (10g) of Bodty TSL Condtion SAR measured 250 mW inout power 532 mW o Sh#t for nominal Body TSL parametors normalized t 1W 21.3 mW /y 204 % (kea) Cenifieate No: 21697230 Pages ors

* in Cataboricnwith causmmon tasomsror Add NoS1 Xueywmn Rond,HHitian Diavic, eling 100191 China Tek o d0ca00020070 reconi—Oemotesinsot E—malt cilchinatt com Hip/hiwsectinatlen Appendix Antenna Parameters with Head TSL Impedance,ranstormed to feed point sren+sin Retum Loss 25008 Antenna Parameters with Body TSL Impedance, ranstormed to fead point «s20+ .190 Relum Loss —2s700 General Antenna Parameters and Dosign Electical Delay (one drection) 1088 ns Affer long term use with 100W radiated power, only a slight warming of the dipole neathe feedpoint can be measured. The dipole is made of standard semrigid coaxial cable. The center conductor o the feeding line i directyy connected to the second arm ofthe dipole. The antenna is therefore short—circuiled for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the posiion as explained in the Measurement Canditons" paragraph. The SAR data are not affected by this change. The overall dipole lenglh is stl according to the Standard. No excessive force must be apple to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by seero Corifieate No:21697230 Pagea ofs

* inCatabotonnith catimmanon tasorarom Add No S1 XueyamRond. dnDoi Heling, 100191; China Tatsete—indasore in.. rec neodnaoiensasit Hmall culchiantcom Hiyyhowchiatten DASY5 Validation Report for Head TSL bie: 11242016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: DI900V2; Serial: D1900V2 — SN: 5d182 Communication System: UID 0, CW,; Frequeney: 1900 MHz; Duty Cyele: 1:1 Medium parameters used: F= 1900 MHz; a = 1.426 $/m; er =40.35; p= 1000 ke/m3 Phantom section: Center Section Measurement Standard: DASY5 (IEEETEC/ANSI C63,19—2007) DASYS Configuration: * Probe: EX3DV4— SN7433; ConvE(7.98, 7.98, 7.98); Calibrated: 9126/2016; + Sensor—Surface: 2mm (Mechanical Surface Detection) * Electronics: DAE4 Sn771; Calibrated: 22/2016 + Phantom: Triple Flat Phantom 5.1 ype: QD 000 PSI CA; Serial: 1161/1 + Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) System Performance Check/Zoom Sean (7x7x7) (7x7x7)/Cube 0: Measurement grid: dc—Smm, dy=Smim, de~Smm Reference Value = 102.8 V/m; Power Drift =—0.02 dB Peak SAR (extrapolated) = 18.7 Whkg SARQ g) = 10. Wikg: SAR(1O g) = 523 Wheg Maximum value ofSAR (measured) = 14.5 Wikg 442 a0.09 4425 zn & 0 dB =14.5 Wikg=1L61 dBWikg. Cenificate No: 21697230 Pagesors

Add: No51 Xuerou Rondoidan Diatic, Reling 100121; Ching Toh e10aadnesa P enedasoitin2st¢ Enallciichinatlcon Htpsnewcinatlen Impedance Measurement Plot for Head TSL tri sis co mog 20,0000/ nef o.ouude t 39 pr cce o as anoe se teice 10.00 c.soo it uoo —tvce asoe cce ce ait saith (Rb0 serte 2.000 (rs ont) w nmuom en mime manre aige Centficate No: 216—97230 Parecors

TTL in Cotabocmtion wih caussamon asoator Add No S1 XueyumnRowdMoidinDisic, Beljng100191, Crina Td «e lnamiienam racredoanoizastt Emal: culichinucon Hiphownchinatien DASVS Validation Report for Body TSL Date; 11232016 Test Laboratory: CTTL, Beijing, China DUT: Dipole 1900 MHz; Type: D1900V2; Serial: DI9O0V2 — SN: 54182 Communication System: UID 0, CW; Frequency: 1900 M uty Cyele: 11 Medium parameters used: {= 1900 Mz o 31 $im;a, =1000 ka/m‘ Phantom section: Right Section Measurement Standard: DASYS (IEEETEC/ANSI C63.19—2007) DASY5 Configuration: * Probe: EX3DV4 — SN7433; ConvF(7.7, 7.7, 7.7); Calibrated: 926/2016; + Sensor—Surfice: 2mm (Mechanical Surface Detection) * Electronics: DAB4 Sn771; Calibrated: 2202016 * Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 * Measurement SW: DASY52, Version 52.8 (8); SEMCAD X ersion 14.6.10 (7372) System Performance Check/Zoom Sean (7x7x7) (7x7x7)/Cube 0: Measurement grids dx=Smm, dy=Smm, de=Smm Reference Value =95.33 V/m; Power Drift=0.03 dB Peak SAR (extrapolated) = 18.6 Wkz SARCT g) =10.2 Wkg: SAR(LO g)=532 Wike Maximum value of SAR (measured) = 14.6 Whas «o a 254 .00 ans2 446 arge L Jns 0 dB = 14.6 W/kg=11.64 dBWikg Cerificate No: 21697230 Page 7 ofs

Add NS1 Xuesamn Ront idin Diic, Hcijng, 100191,China Telsitineasomsts070 rncote—Ioemiditiz20t E—nal: ctichinattcon Mipiwmctination impedance Measurement Plot for Body TSL T it c mag smy w css IT 19 racmmnme oo ccrer es «use w00 tw s0.00 s.cool C can.oo t ce cce maoee c si1 sith (rep0 seate 20000 ts o) m nowoom an sn n c.xmny‘» / Corifieate No: 21697230 Page s ofs

r" In Collaboration with w‘ tw a®‘/‘"]7"J, s_ p_ e a g ns s\ \\\ J+ M + BAA EF4 B Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China CALIBRATION CNAS LO570 ,/&\\\\}\ v Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 "/;,m\\\‘\ E—mail: cttl@chinattl.com http://www.chinattl.en Client Sporton_SZ Certificate No: Z217—97044 CALIBRATIONCERTIFICATH Object D2450V2 — SN: 924 Calibration Procedure(s) FD—211—003—01 Calibration Procedures for dipole validation kits Calibration date: March 21, 2017 This calibration Certificate documents the traceability to national standards, which realize the physical units of measurements(Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature(22+3)‘c and humidity<70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Power Meter NRP2 101919 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Power sensor NRP—Z91 101547 27—Jun—16 (CTTL, No.J16X04777) Jun—17 Reference Probe EX3DV4 SN 3617 23—Jan—17(SPEAG,No.EX3—3617_Jan17) Jan—18 DAE4 SN 777 22—Aug—16(CTTL—SPEAG,No.Z16—97138) Aug—17 Secondary Standards ID # Cal Date(Calibrated by, Certificate No.) Scheduled Calibration Signal Generator E4438C MY49071430 13—Jan—17 (CTTL, No.J17X00286) Jan—18 Network Analyzer E5071C MY46110673 13—Jan—17 (CTTL, No.J17X00285) Jan—18 Name Function Signature Calibrated by: Zhao Jing SAR Test Engineer 4L4 Reviewed by: Qi Dianyuan SAR Project Leader %/ Approved by: Lu Bingsong Deputy Director of the laboratory 2' W Issued: March 25, 2017 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: Z17—97044 ’ Page 1 of 8

5\”1 ; Coll:Boranonemth «x ies CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.en Glossary: TSL tissue simulating liquid Convr sensitivity in TSL / NORMx,y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) For hand—held devices used in close proximity to the ear (frequency range of 300MHz to 3GHz)", February 2005 c) IEC 62209—2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless communication devices used in close proximity to the human body (frequency range of 30MHz to 6GHz)", March 2010 d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz Additional Documentation: e) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: e Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. e Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented parallel to the body axis. e Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. e Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. e SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. e SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. The reported uncertainty of measurement is stated as the standard uncertainty of Measurement multiplied by the coverage factor k=2, which for a normal distribution Corresponds to a coverage probability of approximately 95%. Certificate No: Z17—97044 Page 2 of 8

h» In Collaboration with ‘/"/‘/, s e a y cmnnpmon Mnommng Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.cn Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASY52 52.8.8.1258 Extrapolation Advanced Extrapolation Phantom Triple Flat Phantom 5.1C Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz = 5 mm Frequency 2450 MHz + 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 39.0 + 6 % 1.77 mho/m + 6 % Head TSL temperature change during test «1.0 °C ———— ———— SAR result with Head TSL SAR averaged over 1 Cm" (1 g) of Head TSL Condition SAR measured 250 mW input power 13.0 mW / g SAR for nominal Head TSL parameters normalized to 1W 52.4 mW ig + 20.8 % (k=2) SAR averaged over 10 cm (10 g) of Head TSL Condition SAR measured 250 mW input power 6.04 mW / g SAR for nominal Head TSL parameters normalized to 1W 24.3 mW 1g + 20.4 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 £ 0.2) °C 52.3 46 % 1.93 mho/m + 6 % Body TSL temperature change during test <1.0 °C ———— ———— SAR result with Body TSL SAR averaged over 1 Cm?" (1 g) of Body TSL Condition SAR measured 250 mW input power 12.6 mW / g SAR for nominal Body TSL parameters normalized to 1W 50.5 mW ig + 20.8 % (k=2) SAR averaged over 10 cm> (10 g) of Body TSL Condition SAR measured 250 mW input power 5.86 mW / g SAR for nominal Body TSL parameters normalized to 1W 23.5 mW 1g * 20.4 % (k=2) Certificate No: Z17—97044 Page 3 of 8

In Collaboration with ETTL§E§§ m CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.cn Appendix (Additional assessments outside the scope of CNAS LO570) Antenna Parameters with Head TSL Impedance, transformed to feed point 50.90+ 3.77j0 Return Loss — 28.30B Antenna Parameters with Body TSL Impedance, transformed to feed point 48.30+ 4.18j0 Return Loss — 26.8dB General Antenna Parameters and Design Electrical Delay (one direction) 1.260 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. On some of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded according to the position as explained in the "Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still according to the Standard. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Certificate No: Z17—97044 Page 4 of 8

_© In Collaboration with a=®‘7/"7‘J, s p e a g imgye>" CALIBRATION LABORATORY Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China Tel: +86—10—62304633—2079 Fax: +86—10—62304633—2504 E—mail: cttl@chinattl.com http://www.chinattl.cn DASY5 Validation Report for Head TSL Date: 03.21.2017 Test Laboratory: CTTL, Beijing, China DUT : Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 924 Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1:1 Medium parameters used: f= 2450 MHz; 0 = 1.768 S/m; sr = 39.02; p = 1000 kg/m3 Phantom section: Right Section Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19—2007) DASY5 Configuration: e Probe: EX3DV4 — SN3617; ConvF(7.74, 7.74, 7.74); Calibrated: 1/23/2017; e Sensor—Surface: 1.4mm (Mechanical Surface Detection) e Electronics: DAE4 Sn777; Calibrated: 8/22/2016 e Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1161/1 e Measurement SW: DASY52, Version 52.8 (8); SEMCAD X Version 14.6.10 (7372) Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 103.8 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) =27.0 W/kg SAR(I g) = 13 W/kg; SAR(10 g) = 6.04 W/kg Maximum value of SAR (measured) =21.7 W/kg dB 0 —4.41 —8.83 —13.24 —17.66 —22.07 £.. 0 dB =21.7 W/kg = 13.36 dBW/kg Certificate No: Z17—97044 Page 5 of 8


Document Created: 2017-12-08 10:48:07
Document Modified: 2017-12-08 10:48:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC