Appendix_A

FCC ID: YHLBLUC5PLUS

RF Exposure Info

Download: PDF
FCCID_4432799

Test Laboratory: UnionTrust Date: 2019/8/15 System Check_H835 DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H835 Medium parameters used: f = 835 MHz; σ = 0.89 mho/m; εr = 42.4; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.12, 6.12, 6.12); Calibrated: 2019/4/12 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2019/4/11 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 system check/Area Scan (51x101x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.116 mW/g system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 11.2 V/m; Power Drift = -0.059 dB Peak SAR (extrapolated) = 0.145 W/kg SAR(1 g) = 0.098 mW/g; SAR(10 g) = 0.064 mW/g Maximum value of SAR (measured) = 0.115 mW/g

Test Laboratory: UnionTrust Date: 2019/8/15 System Check_H1900 DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H1900 Medium parameters used: f = 1900 MHz; σ = 1.41 mho/m; εr = 41.3; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(5.06, 5.06, 5.06); Calibrated: 2019/4/12 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2019/4/11 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 system check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.521 mW/g system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.6 V/m; Power Drift = 0.143 dB Peak SAR (extrapolated) = 0.690 W/kg SAR(1 g) = 0.369 mW/g; SAR(10 g) = 0.185 mW/g Maximum value of SAR (measured) = 0.472 mW/g

Test Laboratory: UnionTrust Date: 2019/8/16 System Check_H2450 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: H2450 Medium parameters used: f = 2450 MHz; σ = 1.78 mho/m; εr = 40.2; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.57, 4.57, 4.57); Calibrated: 2019/4/12 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2019/4/11 - Phantom: SAM 1; Type: QD 000 P40 CB; Serial: TP/1378 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 system check/Area Scan (51x71x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.761 mW/g system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 15.6 V/m; Power Drift = 0.186 dB Peak SAR (extrapolated) = 1.04 W/kg SAR(1 g) = 0.519 mW/g; SAR(10 g) = 0.242 mW/g Maximum value of SAR (measured) = 0.688 mW/g

Test Laboratory: UnionTrust Date: 2019/8/15 System Check_B835 DUT: Dipole 835 MHz Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: B835 Medium parameters used: f = 835 MHz; σ = 0.991 mho/m; εr = 55.8; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(6.18, 6.18, 6.18); Calibrated: 2019/4/12 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2019/4/11 - Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 system check/Area Scan (51x81x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.112 mW/g system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 10.4 V/m; Power Drift = 0.030 dB Peak SAR (extrapolated) = 0.142 W/kg SAR(1 g) = 0.095 mW/g; SAR(10 g) = 0.061 mW/g Maximum value of SAR (measured) = 0.112 mW/g

Test Laboratory: UnionTrust Date: 2019/8/15 System Check_B1900 DUT: Dipole 1900 MHz Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: B1900 Medium parameters used: f = 1900 MHz; σ = 1.55 mho/m; εr = 52.5; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.79, 4.79, 4.79); Calibrated: 2019/4/12 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2019/4/11 - Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 system check/Area Scan (51x71x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (interpolated) = 0.524 mW/g system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.4 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.724 W/kg SAR(1 g) = 0.400 mW/g; SAR(10 g) = 0.208 mW/g Maximum value of SAR (measured) = 0.500 mW/g

Test Laboratory: UnionTrust Date: 2019/8/16 System Check_B2450 DUT: Dipole 2450 MHz Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B2450 Medium parameters used: f = 2450 MHz; σ = 2.01 mho/m; εr = 53; ρ = 1000 kg/m3 DASY4 Configuration: - Probe: ES3DV3 - SN3090; ConvF(4.47, 4.47, 4.47); Calibrated: 2019/4/12 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE4 Sn662; Calibrated: 2019/4/11 - Phantom: Triple Flat Phantom 5.1C; Type: QD 000 P51 CA; Serial: 1125 - ; Postprocessing SW: SEMCAD, V1.8 Build 186 system check/Area Scan (51x71x1): Measurement grid: dx=12mm, dy=12mm Maximum value of SAR (interpolated) = 0.775 mW/g system check/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 18.9 V/m; Power Drift = -0.113 dB Peak SAR (extrapolated) = 0.995 W/kg SAR(1 g) = 0.504 mW/g; SAR(10 g) = 0.237 mW/g Maximum value of SAR (measured) = 0.663 mW/g


Document Created: 2019-09-07 13:51:13
Document Modified: 2019-09-07 13:51:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC