Test report DFS

FCC ID: YBN-AIVISBX0

Test Report

Download: PDF
FCCID_4248620

TEST REPORT No.: 18-1-0221601T03a-C1 According to: FCC Regulations Part 15.205 Part 15.209 Part 15.407 ISED-Regulations RSS-Gen, Issue 4 RSS-247, Issue 2 for Robert Bosch Car Multimedia GmbH AIVISBX0 Navigationsystem with WLAN and Bluetooth FCC ID: YBN-AIVISBX0 ISED: 9595A-AIVISBX0 Laboratory Accreditation and Listings Industry Canada Voluntary Controls for Electromagnetic Emissions Reg. No.: 3462D-1 Reg. No.: 3462D-2 Reg. No.:4452, C-20009, Accredited EMC-Test Laboratory Reg. No.: 3462D-3 T-20006, G-20013 MRA US-EU 0003 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Laboratory Accreditation and Listings Page 1 of 25 The test results relate only to the individual items that have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report 18-1-0221601T03a-C1, Page 2 of 25 Table of Contents 1. SUMMARY OF TEST RESULTS................................................................................................................... 3 1.1. Tests measurement overview according to US CFR Title 47, Subpart 15C ................................................. 3 1.2. Attestation:.................................................................................................................................................... 6 2. ADMINISTRATIVE DATA ............................................................................................................................ 7 2.1. Identification of the testing laboratory .......................................................................................................... 7 2.2. Test location ................................................................................................................................................. 7 2.3. Organizational items ..................................................................................................................................... 7 2.4. Applicant’s details ........................................................................................................................................ 7 2.5. Manufacturer’s details .................................................................................................................................. 7 3. EQUIPMENT UNDER TEST (EUT) .............................................................................................................. 8 3.1. Certification Data of Main EUT declared by Applicant ............................................................................... 8 3.2. WLAN 5 GHz 802.11a/n Technical Data Of Main EUT as Declared by Applicant ................................... 9 3.3. EUT: Type, S/N etc. and short descriptions used in this test report ........................................................... 10 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions ............................................................. 10 3.5. EUT set-ups ................................................................................................................................................ 10 3.6. EUT operating modes ................................................................................................................................. 10 4. DESCRIPTION OF TEST SYSTEM SET-UP’S ......................................................................................... 11 5. U-NII DFS RULE REQUIREMENT ............................................................................................................ 12 6. MEASUREMENTS ........................................................................................................................................ 13 6.1. Dynamic frequency selection (DFS) ........................................................................................................... 13 6.2. Parameters of DFS test signals ................................................................................................................... 14 6.3. Test results .................................................................................................................................................. 16 6.4. Measurement uncertainties ......................................................................................................................... 20 7. ABBREVIATIONS USED IN THIS REPORT ............................................................................................ 21 8. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES .................... 21 9. INSTRUMENTS AND ANCILLARY ........................................................................................................... 22 9.1. Test software and firmware of equipment .................................................................................................. 22 9.2. Single instruments and test systems ............................................................................................................ 23 9.3. Legend ........................................................................................................................................................ 25 10. VERSIONS OF TEST REPORTS (CHANGE HISTORY) ...................................................................... 25 END OF TEST REPORT ................................................................................................................................... 25 Table of annex Total pages Annex 1: Test result diagrams (separate document) CETECOM-TR18-1-0048201T01a-A1 264 Annex 2: External photographs of EUT (separate document) CETECOM- TR18-1-0048201T02a-A2 8 Annex 3: Internal photographs of EUT (separate document supplied by customer) -- Annex 4: Test set-up photographs (separate document) CETECOM- TR18-1-0048201T02a -A4 8 CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 3 of 25 1. Summary of test results The test results apply exclusively to the test samples as presented in this report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. Also we refer on special conditions which the applicant should fulfill according §2.927 to §2.948, special focus regarding modification of the equipment and availability of sample equipment for market surveillance tests. The presented Equipment Under Test (in this report, hereinafter referred as EUT) supports radiofrequency technologies with WLAN technology and operating frequency range at 5.150 to 5.850 GHz according to IEE 802.11 a. The EUT integrates a WLAN transmitter. Other implemented wireless technologies were not considered within this test report. Following test cases have been performed to show compliance with valid Part 15.407/15.209 of the FCC CFR Title 47 Rules, Edition 2017 and ISED RSS-247 Issue 2/RSS-Gen Issue 4 standards. 1.1. Tests measurement overview according to US CFR Title 47, Subpart 15C References and Limits EUT EUT Test cases Port set- op. Result FCC Standard RSS Standard Test limit up mode TX-Mode Antenna 99% occupied RSS-Gen, Issue 4 99% Power terminal 2.1049(h) 2 1 Remark 1) bandwidth Chapter 6.6 bandwidth (conducted) §15.303 Antenna + 26 dB RSS-Gen, Issue 4 26 dB spectral terminal §15.407(a) 2 1 Remark 1) bandwidth Chapter 6.6 density bandwidth (conducted) (2) (5) Antenna KDB789033 + KDB789033 + Duty-Cycle terminal No Limit Criteria 2 1 Remark 1) ANSI C63.10:2013 ANSI C63.10:2013 (conducted) Transmitter Antenna Operation within § 2.1055 + RSS-Gen, Issue 4: frequency terminal designated 2 1 Remark 1) §15.407(g) Chapter 6.11 stability (conducted) operational band CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 4 of 25 Power Limits (if RSS-247, Issue 2 §15.407(a) Antenna Gain < 6 Chapter dBi) (1)(iv) Antenna 5.15-5.25 GHz 6.2.1.1 250 mW Maximum Client devices terminal 2 1 Remark 1) output power (conducted) (2) lesser of 250mW 5.25-5.35 GHz & 6.2.2.1 or 11dBm+10logB 5.47-5.725 GHz (3) 6.2.3.1 1W 5.725-5.85 GHz 6.2.4.1 Power Spectral RSS-247, Issue 2 Density Limits (if §15.407(a) Chapter Antenna Gain < 6 dBi) (1)(iv) Peak Power Antenna 5.15-5.25 GHz 6.2.1.1 11dBm/MHz Spectral terminal Client devices 2 1 Remark 1) density (conducted) (2) 5.25-5.35 GHz & 6.2.2.1 11dBm/MHz 5.47-5.725 GHz (3) 6.2.3.1 30dBm/500kHz 5.725-5.85 GHz 6.2.4.1 e.i.r.p. Limits (if RSS-247, Issue 2 §15.407(a) Antenna Gain < 6 Chapter dBi) Antenna (1)(iv) terminal 5.15-5.25 GHz 6.2.1.1 250 mW + 6 dBi (conducted) Client devices Maximum lesser of 250mW 2 1 Remark 1) e.i.r.p. power (2) + or 11dBm+10logB 5.25-5.35 GHz & 6.2.2.1 Antenna + 5.47-5.725 GHz Gain 6 dBi (3) 6.2.3.1 1 W + 6 dBi 5.725-5.85 GHz 6.2.4.1 < 6dBi or if Antenna directional Gain > RSS-247, Issue 2 6dBi reduction of Antenna chapter 6.2.1.1 Max. power & Antenna gain §15.407(a) Measured terminal 6.2.2.1 power spectral -- -- information (1)(2)(3) Antenna Gain. (conducted) 6.2.3.1 density by the 6.2.4.1 amount in dB that the directional gain of the antenna exceeds 6 dBi CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 5 of 25 5150-5250 MHz | 5250-5350 MHz RSS-Gen., Issue 4 5470-5725 MHz + all emissions General field RSS-247, Issue 2 outside operating §15.407(b) strength Chapter band shall not (1)(2)(3)(4)(5)(6) emissions 6.2.1.2 , 6.2.2.2 exceed -27 (7)(8) within 6.2.3.2, dBm/MHz e.i.r.p. Enclosure + restricted + Inter- bands 6.2.4.2 5725-5850 MHz connecting 1 1 Remark 1) Spectrum Mask cables + acc. to (4)(i) (radiated) RSS-Gen., Issue 4 Band-Edge + Restricted band compliance RSS-247, Issue 2 §15.205 limits radiated Chapter + + 6.2.1.2 , 6.2.2.2 §15.209 General field 6.2.3.2, strength limits + 6.2.4.2 Transmit power control RSS-Gen., Issue 4 Requirements: + Antenna §15.407 + Masters Dynamic terminal 2 3 Pass (h1)(h2) RSS-247, Issue 2 Active clients frequency (conducted) Chapter 6.3 Passive clients selection (DFS) No transmissions in case of either absence of information to Not tested Discontinuous §15.407(c) RSS-247, Issue 2 transmit or transmissions FIRMWARE + Chapter 6.4 operational failure -- -- Applicants + §15.407(i) a+b+c + declaration of Device security implementation Protection of firmware by unauthorized parties AC-Power AC-Power lines RSS-Gen, Issue 4: Lines AC Power line or §15.207(a) Chapter 8.8 -- -- Not applicable Conducted conducted limits Battery Table 3 Emissions Charger Remark 1) Please refer to separate FCC RF Test Report CETECOM_18-1-0048201T01a CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 6 of 25 RF-Exposure Evaluation (separation distance user to RF-radiating element greater 20cm) References & Limits EUT EUT Test cases Port FCC set- Op Result RSS Section Test Limit up mode Standard SAR-Limits 1 1 FCC: 1.1310(b) Radio Cabinet + See separate test frequency §1.1310(b) reports Inter- RSS-102 radiation §2.1091 RF-Field CETECOM_TR connecting Issue 5 18-1- exposure §2.1093 Strength Limits: requirements cables FCC: “general 0048201T05a (radiated) population/ 1 1 uncontrolled” environment Table 1 ISED: Table 4 1.2. Attestation: I declare that all measurements were performed by me or under my supervision and that all measurements have been performed and are correct to my best knowledge and belief to Innovation , Science and Economic Development (ISED) Canada standards. All requirements as shown in above table are met in accordance with enumerated standards. The current version of the Test Report CETECOM_TR18-1-0221601T03a-C1 replaces the Test Report CETECOM_TR18-1-0221601T03a dated 2018-12-10. The replaced test report is herewith invalid. Ninovic Perez 2018.12.14 09:20:55 + 01'00' .................................................. .................................................... Dipl.-Ing. Niels Jeß Dipl.-Ing N. Perez Responsible for test section Responsible for test report CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 7 of 25 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report and Dipl.-Ing N. Perez Project leader: Dipl.-Ing N. Perez Receipt of EUT: 2018-08-20 Date(s) of test: 2018-08-22 - 2018-12-03 Date of report: 2018-12-14 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 2.4. Applicant’s details Applicant’s name: Robert Bosch Car Multimedia GmbH Address: Robert-Bosch-Straße 200 31139 Hildesheim Germany Contact : Mr. Salvatore Miraglia 2.5. Manufacturer’s details Manufacturer’s name: see applicant's details Address: see applicant's details CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 8 of 25 3. Equipment under test (EUT) 3.1. Certification Data of Main EUT declared by Applicant Model Nr. AIVISBX0 Type Navigationsystem with WLAN and Bluetooth FCC ID AIVISBX0 IC/ ISED YBN-AIVISBX0  5150 MHz (Channel 36) to 5250 MHz (Channel 48) for 20MHz BW Frequency range  5250 MHz (Channel 52) to 5350 MHZ (Channel 64) for 40MHz BW (US/Canada -bands)  5470 MHz (Channel 100) to 5725 MHZ (Channel 140) for 40MHz BW  5725 MHz (Channel 149) to 5850 MHZ (Channel 165) for 40MHz BW Type of modulation See chapter 3.2  Integrated Antenna Type  External, no RF- connector  External, separate RF-connector Antenna Model PCB Antenna Antenna Gain 5.1 dBi  802.11 a/n/ac  802.11 b/g/n (not tested within this report) Installed options  Bluetooth LE (not tested within this report)  Bluetooth EDR (not tested within this report)  Internal battery Li-Io, range 3.5V to 4.1V Power supply  over AC/DC adapter: 110V/60 Hz  Nominal Test Voltage : 13.5 V DC with external power supply Special EMI components -- EUT sample type  Production  Pre-Production  Engineering FCC label attached  yes  no Remark: CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 9 of 25 3.2. WLAN 5 GHz 802.11a/n Technical Data Of Main EUT as Declared by Applicant Firmware Version --  Ch 36 | 40 | 44| 48  Bandwidth 20 MHz U-NII 1: 5150-5250 MHz  Ch. 38 | 46  Bandwidth 40 MHz  Ch. 42  Bandwidth 80 MHz  Ch 52 | 56 | 60| 64  Bandwidth 20 MHz U-NII2A: 5250-5350 MHz  Ch. 54 | 62  Bandwidth 40 MHz  Ch. 58  Bandwidth 80 MHz  Ch 100 | 104 | 108  Ch 112 | 116 | 120 Frequency | Channel | B.W.  Bandwidth 20 MHz  Ch 124 | 128 | 132 (USA bands only)** U-NII 2C: 5470-5725 MHz  Ch 136 | 140  Ch. 102 | 110 | 118  Bandwidth 40 MHz  Ch 126 | 134  Ch 106 | 122  Bandwidth 80 MHz  Ch 149 | 153 | 157  Bandwidth 20 MHz  Ch 161 | 165 U-NII 3: 5725 -5850 MHz  Ch 151 | 159  Bandwidth 40 MHz  Ch 155  Bandwidth 80 MHz  BPSK | 6 Mbps / 9 Mbps 802.11a – Mode OFDM  QPSK | 12 Mbps / 18 Mbps Modulation | Data Rates  16-QAM | 24 Mbps / 36 Mbps  64-QAM | 48 Mbps / 54 Mbps 802.11n – Mode OFDM  HT20 (MCS0 – MCS7) | 7.2/14.4/21.7/28.9/43.3/57.8/65/72.2 Mbps Modulation | Data Rates  HT40 (MCS0 – MCS7) | 15/30/45/60/90/120/135/150 Mbps  HT20 (MCS0 – MCS9) | 7.2/14.4/21.7/28.9/43.3/57.8/65/72.2 Mbps 802.11ac – Mode OFDM  HT40 (MCS0 – MCS9) | 15/30/45/60/90/120/135/150 Mbps Modulation | Data Rates  HT80 (MCS0 – MCS9) | 7.2/14.4/21.7/28.9/43.3/57.8/65/72.2 Mbps Power Supply  Nominal Test Voltage : 13.5V DC with external power supply Special EMI Components -- EUT sample type  Production  Pre-Production  Engineering FCC label attached  yes  no MASTER DFS equipment type SLAVE with DFS-capability SLAVE without DFS-capability IEEE802.11n (2012) Description of Medium IEEE 802.11ac (2014) access protocol applicant specific CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 10 of 25 3.3. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware software status tion*) status Navigationsystem EUT A AIVISBX0 with WLAN and 0005009 C-Sample 1003 Bluetooth *) EUT short description is used to simplify the identification of the EUT in this test report. 3.4. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) S7291GC0003 AE 1 USB-cable (Dongle) 0,38m Version-D1 -- 79 AE 2 Power Supply Cable -- -- -- -- AE 3 Notebook Lenovo X200S LVZT1DG -- -- CISCO AIR- AE 4 Router FJC2005F37L -- -- CAP2702E-A-K9 *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 3.5. EUT set-ups EUT set- Combination of EUT and AE Description up no.*) EUT A + AE 1 + AE 2 + + AE 3 set. 1 Conducted measurement set-up + AE 4 *) EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. 3.6. EUT operating modes EUT Description of operating Additional information operating modes mode no.*1) EUT was connected to a router. Traffic was generated via software tool op. 1 Normal mode iperf. *1) EUT operating mode no. is used to simplify the test report. *2) Please refer to document “Instructions_RadioTypeApproval_9_6_2017” dated 2017-06-09 for additional information regarding operating mode setup and output power levels. CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 11 of 25 4. Description of test system set-up’s Three theoretical set-ups for coupling the signals into the EUT are shown below, depending from the intended use of the equipment. Figure Set-up Designation Set-up A: EUT is Master with DFS capability. The test signals are injected into the R-LAN EUT during a communication link connection to a SLAVE device. Set-up B: EUT is slave with or without DFS capability. The test signals are injected into the MASTER R-LAN device during a communication link connection to the SLAVE device. Set-up C: EUT is slave with DFS capability. The test signals are injected into the Slave during a communication link connection to a RLAN device working as MASTER. The Set-up is realized by the OSP-Unit from R&S Testsystem TS8997, RF-Output Port 1 is connected to EUT’s DFS Measurement port. Any path losses are calibrated out, so the test signal is on the threshold level as stated by the standard in Table D.2. The companion device is a Cisco Aironet 2700 Series 802.11ac Dual Band Access Point, Model AIR- CAP2702E-A-K9 (S/N FJC2005F37L). This is a DFS Master device with FCC-ID LDK102091/ ISED 2461B- 102091. CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 12 of 25 5. U-NII DFS Rule Requirement Applicability of DFS requirements prior to use a channel Requirement Operation Mode Master Client without Client with radar detection radar detection Non-Occupancy Period X X X DFS Detection Threshold X Not required X Channel Availability Check Time X Not required Not required Uniform Spreading X Not required Not required U-NII Detection Bandwidth X Not required X Applicability of DFS requirements during normal operation Requirement Operation Mode Master Client without Client with radar detection radar detection DFS Detection Threshold X Not required X Channel Closing Transmission Time X X X Channel Move Time X X X U-NII Detecion Bandwidth X Not required X Additional requirements for Master Device or Client with Client without Radar Detection devices with multiple bandwidth Radar Detection modes U-NII Detection Bandwidth and All BW modes must be tested Not required Statistical Performance Check Channel Move Time and Channel Test using widest BW available Test using the widest BW mode Closing Transmission Time available for the link All other tests Any single BW mode Not required Note: Frequencies selected for statistical performance check should include several frequencies within the radar detection bandwidth and frequencies near the edge of the radar detection bandwidth. For 802.11 devices it is suggested to select frequencies in each of the bonded 20MHz channel and the channel center frequencies. CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 13 of 25 6. Measurements 6.1. Dynamic frequency selection (DFS) 6.1.1. Test location and equipment (for reference numbers please see chapter 'List of test equipment') test location  CETECOM Essen (Chapter. 2.2.1)  443 System CTC-FAR-EMI-  Please see Chapter. 2.2.3 test site  441 EMI SAR  487 SAR NSA  347 Radio.lab.  TS 8997   receiver  377 ESCS30  001 ESS  489 ESU 40     584 FSU spectr. analys.  120 FSEM  264 FSEK  489 ESU 40   antenna  574 BTA-L  133 EMCO3115  302 BBHA9170  289 CBL 6141  030 HFH-Z2  477 GPS signaling  392 MT8820A  436 CMU  547 CMU otherwise  266 NRV-Z31  600 NRVD  110 USB LWL  482 Filter Matrix  378 RadiSense  693 TS8997 DC power  671 EA-3013S  463 HP3245A  459 EA 2032-50  268 EA- 3050  494 AG6632A  498 NGPE 40 6 dB Power  331 HC 4055  248  529  - cable OTA20 otherwise Attenuator divider  530 10dB Attenuator  K 4 Cable kit Supply voltage  13.5V DC  060 110 V 60 Hz via PAS 5000 6.1.2. Reference FCC  Part 15 Subpart C, §15.407(a)(1)(2)(3)(4)  RSS-247, Issue 2 ISED  RSS-Gen, Issue 4 ANSI  C63.10-2013  UNII: KDB 789033 D02 v02r01 Guidelines for Compliance Testing KDB Guidance no.  UNII: KDB 905462 D03 v01r02 Client Without DFS New Rules  UNII: KDB 905462 D04 v01 Operational Modes for DFS Testing New Rules 6.1.3. EUT settings: The EUT was connected to a router. With help of iperf a continuous transmission was set. 6.1.4. Test condition and measurement test set-up Signal ink to test system (if used):  air link  cable connection  none EUT-grounding  none  with power supply  additional connection Equipment set up  table top 1.5m height  floor standing Climatic conditions Temperature: (22±3°C) Rel. humidity: (40±20)% General measurement procedures Please see chapter “Test system set-up for conducted RF-measurement at antenna Port” (W1 Set-up) 6.1.5. Test Results summary: Clause Test Parameter Remarks Pass/Fail 15.407 DFS Detection Threshold Not applicable N/A 15.407 Channel Availability Check Time Not applicable N/A 15.407 Channel Move Time Applicable Pass 15.407 Channel Closing Transmission Time Applicable Pass 15.407 Non-Occupancy Period Applicable Pass 15.407 Uniform Spreading Not applicable N/A 15.407 U-NII Detection Bandwidth Not applicable N/A Remark: Widest supported BW of EUT is 80MHz. According KDB 905462 D03 only testing in 40MHz is needed. CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 14 of 25 6.2. Parameters of DFS test signals 6.2.1. DFS Detection Threshold for Master Devices as well as Client Devices With Radar Detection Maximum Transmit Power EIRP Value (see note) ≥200mW -64 dBm < 200mW and power spectral density < 10dBm/MHz -62 dBm <200mW and that do not meet the power spectral -64 dBm density < 10dBm/MHz Note 1: This is the level at the input if the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note 3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 D01. 6.2.2. DFS Response Requirement Values Parameter Value Non-occupancy period Minimum 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds (see Note 1) Channel Closing Transmission Time 200 milliseconds + an aggregate of 60 milliseconds over remaining 10 seconds period (See Notes 1 and 2) U-NII Detection Bandwidth Minimum 100% of the U-NII 99% transmission power bandwidth (See Note 3) Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of the control signals will not count quiet periods in between transmissions. Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 should be used. For each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 15 of 25 6.2.3. Radar Test Waveforms Short Pulse Radar Test Waveforms Radar Type Pulse Width PRI (µsec) Number of Pulses Minimum Minimum (µsec) Percentage of Number of Successful Trials Detecion 0 1 1428 18 See Note 1 See Note 1 1 1 Test A: 15 60% 30 unique PRI values randomly selected from the list of 23 PRI values in Table 5a Test B: 15 unique PRI values randomly selected within the range of 518-3066 µsec, with a minimum increment of 1 µsec, excluding PRI values selected in Test A 2 1-5 150-230 23-29 60% 30 3 6-10 200-500 16-18 60% 30 4 11-20 200-500 12-16 60% 30 Aggregate (Radar Types 1-4) 80% 120 Note 1: Short Pulse Radar Type 0 should be used for the detection bandwidth test, channel move time, and channel closing time tests. A minimum of 30 unique waveforms are required for each of the Short Pulse Radar Types 2 through 4. Long Pulse Radar Test Waveforms Radar Pulse Chirp PRI Number of Number pf Minimum Minimum Type Width Width (µsec) Pulses per Bursts Percentage Number of (µsec) (MHz) Burst of Trails Successful Detection 5 50-100 5-20 1000 – 1-3 8-20 80% 30 2000 The parameters for this waveform are randomly chosen. Thirty unique waveforms are required for the Long Pulse Radar Type waveforms. If more than 30 waveforms are used for the Long Pulse Type waveforms, the each additional waveform must also be unique and not repeated from the previous waveforms. Frequency Hopping Radar Test Waveform Radar Pulse Chirp PRI Number of Number pf Minimum Minimum Type Width Width (µsec) Pulses per Bursts Percentage Number of (µsec) (MHz) Burst of Trails Successful Detection 6 1 333 9 0.333 300 70% 30 CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 16 of 25 6.3. Test results DFS In-Service Monitoring (5270 MHz; 11,000 dBm; 40 MHz) Test according to FCC title 47 part 15 §15.407(h), KDB 905462 D02 U-NII DFS Compliance Procedures New Rules v02 Measurement uncertainty calculated in accordance with ETSI TR 100 028-1. Expanded uncertainty (K=2) for Channel Closing Transmission Time in the first 200 ms: <10.208% Expanded Uncertainty (K=2) for Channel Closing Transmission Time for the remaining channel move time period:<2.632% Expanded Uncertainty (K=2) for Channel Move Time:<0.1% Measurement Summary DUT Frequency Radar Type Type of Measurement value Overall (MHz) No. Result 5270.000000 0 First of all Transmitt Test --- 5270.000000 0 Channel Move Time PASS 5270.000000 0 Channel Closing Transmission Time PASS 5270.000000 0 Non-occupancy period PASS (continuation of the "Measurement Summary" table from column 4 ...) DUT Frequency Overall Comment (MHz) 5270.000000 not performed / not finished 5270.000000 5270.000000 5270.000000 Channel Move Time Detailed Results DUT Frequency Radar Type CMT Tx CMT Limit CMT Result (MHz) No. Time (s) (s) 5270.000000 0 2.263 10.000 PASS (continuation of the "Channel Move Time Detailed Results" table from column 5 ...) DUT Frequency CMT Comment (MHz) Tx Time value is last trailing edge 5270.000000 found within sweep. See Note 1. Channel Closing Transmission Time Detailed Results DUT Frequency Radar Type CCTT Type of Value CCTT No. of CCTT Tx (MHz) No. Pulses found Time (ms) 5270.000000 0 first 200 ms 177 6.936 5270.000000 0 remaining 10.0 second(s) period 121 18.388 (continuation of the "Channel Closing Transmission Time Detailed Results" table from column 5 ...) DUT Frequency CCTT Tx CCTT Result CCTT Comment (MHz) Time Limit (ms) 5270.000000 200.000 PASS See Note 1. 5270.000000 60.000 PASS See Note 1. CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 17 of 25 Non-occupancy period Detailed Results DUT Frequency Radar Type NOP No. of Pulses NOP No. of NOP Tx NOP Tx (MHz) No. found Pulses Limit Time Time Limit (s) (s) 5270.000000 0 0 0 0.000 0.000 (continuation of the "Non-occupancy period Detailed Results" table from column 6 ...) DUT Frequency NOP Result (MHz) 5270.000000 PASS Transmitting Test Detailed Results DUT Frequency Tx-Test Tx-Test Comment (MHz) Result 5270.000000 --- not performed / not finished Additional Information Note Description Because of the radar pulse event at the beginning, Note 1: the investigation of the trace begins with an offset of 26.7 ms conforming to the end of the Radar burst. Channel move time (CMT) / channel closing transmission time (CCTT) measurement Note 2: was made with hi resolution video sweep using OSP DAQ channel Because of the substantially higher sampling rate of the video signal Note 3: the results for CCTT and CMT are more accurate than in the graphics visible. Reached timing accuracy of the video trace: approx 4 µs The Non-Occupancy Period trace starts at the end of the Channel move time trace Note 4: (20.000 secs.) Labeling of the x-axis (time) is relative to its beginning (0 secs.) CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 18 of 25 Radar level verification Description Value Unit 12.59 mW Configured DUT EIRP: 10.00 dBm/MHz Configured DUT PSD: Requirement of the Detection threshold value -64 dBm for this given values acc. to FCC clause 5.2 / Table 3 Vector Generator level setting -23.19 dBm Configured overall pathlost from Vector Generator RF out to 57.99 dB DUT connector of 'DUT to OSP'-cable Given additional level added to the amplitude of the waveform to account for variations in measurement 1.00 dB equipment acc. to FCC clause 5.2 / Table 3 / Note 2 This results in the following radar signal -81.18 dBm level at the DUT 25 20 Level in dBm 10 0 -10 -20 0 2 4 6 8 10 12 14 16 18 20 Time in s In-Service Monitoring Channel Move Time Threshold Start of Radar Trigger at end of Radar First 200ms of Channel Closing Tx Time 10sec Channel Move Time Limit Last measured edge of Channel Closing Tx Time 25 20 10 Level in dBm 0 -10 -20 0 50 100 150 200 250 Time in ms In-Service Monitoring Channel Move Time first 200ms Threshold Start of Radar Trigger at end of Radar First 200ms of Channel Closing Tx Time CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 19 of 25 25 20 10 Level in dBm 0 -10 -20 0 500 1000 1500 1860 Time in s In-Service Monitoring Non-occupancy period Threshold In-Service Monitoring Channel Move Time Channel Move Time; Channel Closing Transmission Time Setting Instrument Target Value Value Center Frequency 5.27000 GHz 5.27000 GHz Span ZeroSpan ZeroSpan RBW 3.000 MHz >= 3.000 MHz VBW 3.000 MHz >= 3.000 MHz SweepPoints 30001 ~ 30001 Sweeptime 20.000 s 20.000 s Reference Level -30.000 dBm -30.000 dBm Attenuation 5.000 dB AUTO Detector MaxPeak MaxPeak SweepCount 1 1 Filter 3 dB 3 dB Trace Mode Clear Write Clear Write Sweeptype Sweep AUTO Preamp off off Trigger External External Trigger Offset 0.000 ms 0.000 ms Non-occupancy period Setting Instrument Target Value Value Center Frequency 5.27000 GHz 5.27000 GHz Span ZeroSpan ZeroSpan RBW 3.000 MHz >= 3.000 MHz VBW 3.000 MHz >= 3.000 MHz SweepPoints 30001 ~ 30001 Sweeptime 1.860 ks 1.860 ks Reference Level -30.000 dBm -30.000 dBm Attenuation 5.000 dB AUTO Detector MaxPeak MaxPeak SweepCount 1 1 Filter 3 dB 3 dB Trace Mode Clear Write Clear Write Sweeptype Sweep AUTO Preamp off off CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 20 of 25 6.4. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based on a RF-Measurement Reference Frequency range Remarks confidence level of 95% Conducted emissions 9 kHz - 150 kHz 4.0 dB CISPR 16-2-1 - (U CISPR) 150 kHz - 30 MHz 3.6 dB Radiated emissions 30 MHz - 1 GHz 4.2 dB CISPR 16-2-3 E-Field Enclosure 1 GHz - 18 GHz 5.1 dB Disturbance power CISPR 16-2-2 30 MHz - 300 MHz - - Substitution Power Output radiated - 30 MHz - 4 GHz 3.17 dB method Cel- Cel- Set-up No. BT1 W1 W2 -- C1 C2 Power Output conducted - 9 kHz - 12.75 GHz N/A 0.60 0.7 0.25 N/A -- - 12.75 - 26.5GHz N/A 0.82 -- N/A N/A -- Conducted emissions - 9 kHz - 2.8 GHz 0.70 N/A 0.70 N/A 0.69 -- N/A - not on RF-port 2.8 GHz - 12.75GHz 1.48 N/A 1.51 N/A 1.43 -- applicable 12.75 GHz - 18GHz 1.81 N/A 1.83 N/A 1.77 -- 18 GHz - 26.5GHz 1.83 N/A 1.85 N/A 1.79 -- 0.1272 ppm (Delta Marker) Frequency Occupied bandwidth - 9 kHz - 4 GHz error 1.0 dB Power - 0.1272 ppm (Delta Marker) Frequency Emission bandwidth 9 kHz - 4 GHz error - See above: 0.70 dB Power Frequency stability - 9 kHz - 20 GHz 0.0636 ppm - 150 kHz - 30 MHz 5.0 dB Magnetic Radiated emissions 30 MHz - 1 GHz 4.2 dB field - Enclosure 1 GHz - 20 GHz 3.17 dB E-field Substitution Table: measurement uncertainties, valid for conducted/radiated measurements CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 21 of 25 7. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV . AVG. CAV Average detector EIRP Equivalent isotropically radiated power. determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission. USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification. Documents from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power 8. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS. Deutsche All laboratories and test sites of CETECOM GmbH. Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz. 3 m / 10 m (OATS) FCC. Federal Communications 487 Radiated Measurements 30 MHz to 1 GHz. 3 m (SAR) (MRA US-EU Commission 558 Radiated Measurements above 1 GHz. 3 m (FAR) 0003) Laboratory Division. USA 348 Mains Ports Conducted Interference Measurements 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz. 3 m / 10 m (OATS) ISED. Industry Canada 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz. 3 m (SAR) Certification and Engineering 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz. 3 m (SAR) Bureau 558 3462D-3 Radiated Measurements above 1 GHz. 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz. 3 m (SAR) VCCI. Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz. 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment. Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site. SAR = Semi Anechoic Room. FAR = Fully Anechoic Room CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 22 of 25 9. Instruments and Ancillary The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 9.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 9.15.00 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 9.15.00 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 607 Signal Generator SMR 20 832033/011 V1.25 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 670 Univ. Radio Communication Tester CMU 200 106833 µP1 =V8.50, Firmware = V.20 689 Vector Signal Generator SMU200 100970 02.20.360.142 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 23 of 25 9.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 16.05.2019 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 16.05.2019 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 16.05.2019 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 15.05.2019 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 30.05.2019 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 30.05.2019 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 30.05.2019 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 15.05.2019 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 30.05.2021 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 30.05.2021 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 30.05.2019 133 horn antenna 18 GHz (Meas 1) 3115 9012-3629 EMCO 36 M 1c 10.03.2020 134 horn antenna 18 GHz (Subst 2) 3115 9005-3414 EMCO 36 M - 10.03.2020 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 30.04.2018 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 30.05.2020 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 30.05.2019 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 30.05.2019 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 30.05.2020 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 30.05.2020 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 17.05.2019 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 14.03.2020 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 20.03.2020 331 Climatic Test Chamber -40/+180 Grad HC 4055 43146 Heraeus Vötsch 24 M - 30.10.2018 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 30.05.2020 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 17.05.2019 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 24.05.2019 371 Bluetooth Tester CBT32 100153 R&S 36 M - 30.05.2019 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 12 M - 17.05.2019 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 30.05.2019 389 Digital Multimeter Keithley 2000 0583926 Keithley pre-m - 126.0604.0003.3.3.3.2 LUFFT Mess u. 405 Thermo-/Hygrometer OPUS 10 THI 24 M - 30.03.2019 2 Regeltechnik 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 06.03.2019 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 10.03.2020 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 30.05.2019 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 30.05.2020 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 30.05.2019 CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 24 of 25 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 30.04.2021 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 16.05.2019 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 31.03.2019 NSA CETECOM WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 18.05.2019 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 30.03.2018 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 05.07.2018 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36/12 M - 31.07.2018 System CTC S-VSWR Verification SAR- System EMI Field SAR S- ETS 550 - 24 M - 30.03.2019 EMI VSWR Lindgren/CETECOM System CTC FAR S- 558 System CTC FAR S-VSWR - CTC 24 M - 08.08.2019 VSWR 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2019 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 594 Wideband Radio Communication Tester CMW 500 101757 Rohde & Schwarz 12 M - 30.05.2019 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz pre-m - 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 17.05.2019 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 15.05.2019 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 30.05.2020 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 30.05.2019 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 24 M - 30.03.2019 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 642 Wideband Radio Communication Tester CMW 500 126089 Rohde&Schwarz 24 M - 24.05.2019 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 24 M - 30.05.2020 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 30.05.2019 Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 29.03.2019 Solutions 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 30.05.2019 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 690 Spectrum Analyzer FSU 100302/026 Rohde&Schwarz 24 M - 16.05.2019 691 OSP120 Base Unit OSP120 106833 Rohde & Schwarz 12 M - 30.05.2019 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 36 M - 29.05.2020 697 Power Splitter ZN4PD-642W-S+ 165001445 Mini-Circuits - 2 MA 4010-KT080-XPET- MA4170-KT100- 703 INNCO Antennen Mast INNCO pre-m - ZSS3 XPET- CO3000/933/3841051 704 INNCON Controller CO 3000-4port INNCO Systems GmBh pre-m - 6/L 711 Harmonic Mixer 90 GHz - 140GHz RPG FS-Z140 101004 RPG 24 M - 22.02.2019 712 Harmonic Mixer 75 GHz - 110GHz FS-Z110 101468 Rohde & Schwarz 24 M - 22.02.2019 713 Harmonic Mixer, 50 GHz - 75GHz FS-Z75 101022 Rohde & Schwarz 24 M - 22.05.2019 714 Signal Analyzer 67GHz FSW67 104023 Rohde & Schwarz 24 M - 28.02.2020 RPG Radiometer 715 Harmonic Mixer, 140 GHz - 220GHz FS-Z220 101009 24 M - 03.08.2019 Physics 716 Harmonic Mixer 220 GHz to 325 GHZ FS-Z325 101005 RPG Radiometer Physics 24 M - 13.02.2019 747 Spectrum Analyzer FSU 26 200152 Rohde & Schwarz 12 M - 30.05.2019 748 Pickett-Potter Horn Antenna FH-PP 4060 010001 Radiometer Physiscs - - 749 Pickett-potter Horn Antenna FH-PP 60-90 010003 Radiometer Physics - - CETECOM_TR18_1_0221601T03a_C1

Test Report 18-1-0221601T03a-C1, Page 25 of 25 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 750 Pickett-Potter Horn Antenna FH-PP 140-220 010011 Radiometer Physics - - 751 Digital Optical System optoCAN-FD Transceiver 17-010416 mk-messtechnik GmbH - - 752 Digital Optical System optoCAN-FD Transceiver 17-010083 mk-messtechnik GmbH - - 753 Digital Optical System optoCAN-FD Transceiver 17-010084 mk-messtechnik GmbH - - 754 Digital Optical System optoCAN-FD Transceiver 17-010415 mk-messtechnik GmbH - - 755 Digital Optical System optoLAN-100-MAX 17-010795 mk-messtechnik GmbH - - WIDEBAND RADIO 757 CMW500 163673 Rohde&Schwarz 12 M - 20.07.2018 COMMUNICATION 758 Signal Generator SMU 200A 100754 Rohde & Schwarz 24 M - 11.10.2019 780 Spectrum Analyzer FSH3 101726 Rohde & Schwarz 12 M - 19.07.2018 Elektro-Automatik 781 Power Supply PS 2042-10 B 2815450369 - - GmbH lektro-Automatik GmbH 782 Power Supply PS 2042-10 B 2815450348 - - &Co.KG 783 Spectrum Analyzer FSU 26 100414 Rohde & Schwarz 12 M - 30.05.2019 784 Power Supply NGSM 32/10 00196 Rohde & Schwarz 12 M - 785 RSP RF Step Attenuator 860712/012 Rohde & Schwarz 12 M - 786 SAR Probe ES3DV3 3340 Speag 36 M - 14.02.2021 787 OSP OSP B157WX 101264 Rohde & Schwarz 12 M - 30.05.2019 9.3. Legend Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibrationequipment Ancillary of this equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 10. Versions of test reports (change history) Version Applied changes Date of release -- Inital release 2018-12-10 Results added for 40MHz bandwidth, FCC/ISED ID added from Cisco router, KDB reference added, KDB relaxing comment added, C1 2018-12-14 Table “Applicability of DFS requirements during normal operation” corrected END OF TEST REPORT CETECOM_TR18_1_0221601T03a_C1


Document Created: 2019-04-23 18:24:11
Document Modified: 2019-04-23 18:24:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC