RF Exposure Evaluation

FCC ID: YBN-AIVIP32R0

RF Exposure Info

Download: PDF
FCCID_3480887

TEST REPORT No.: 17-1-0065901T67a According to: FCC Regulations Part 1.1310 Part 2.1091 IC-Regulations RSS-102, Issue 5 for Robert Bosch Car Multimedia GmbH AIVIP32R0 FCC-ID: YBN-AIVIP32R0 IC: 9595A-AIVIP32R0 PMN: AIVIP32R0 HVIN: AIVIP32R0 FVIN: X128 Laboratory Accreditation and Listings Voluntary Controls for Industry Canada Electromagnetic Emissions Reg. No.: MRA US-EU 0003 Reg. No.: 3462D-2 R-2666 C-2914, Reg. No.: 3462D-3 T-1967, G-301 accredited according to DIN EN ISO/IEC 17025 CETECOM GmbH Laboratory Radio Communications & Electromagnetic Compatibility Im Teelbruch 116 • 45219 Essen • Germany Registered in Essen, Germany, Reg. No.: HRB Essen 8984 Tel.: + 49 (0) 20 54 / 95 19-954 • Fax: + 49 (0) 20 54 / 95 19-964 E-mail: info@cetecom.com • Internet: www.cetecom.com Page 1 of 22 The test results relate only to the individual items which have been tested. This report shall not be reproduced in parts without the written approval of the testing laboratory © Copyright: All rights reserved by CETECOM

Test Report 17-1-0065901T67a, Page 2 of 22 Table of contents 1. SUMMARY OF TEST RESULTS...................................................................................................................... 3 1.1. Summary of tests results .................................................................................................................................. 3 2. ADMINISTRATIVE DATA ............................................................................................................................... 4 2.1. Identification of the testing laboratory ............................................................................................................. 4 2.2. Test location .................................................................................................................................................... 4 2.3. Organizational items ........................................................................................................................................ 4 2.4. Applicant’s details ........................................................................................................................................... 4 2.5. Manufacturer’s details ..................................................................................................................................... 4 1.2 Summary of product description ....................................................................................................................... 4 1.3 Refer Rules ....................................................................................................................................................... 5 1.4 EUT Technologies ............................................................................................................................................ 5 1.5 Antenna Information ......................................................................................................................................... 7 2.6. EUT: Type, S/N etc. and short descriptions used in this test report ................................................................ 10 2.7. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions .................................................................. 10 2.8. EUT set-ups ..................................................................................................................................................... 10 2.9. EUT operating modes ...................................................................................................................................... 11 3. MEASUREMENTS ............................................................................................................................................. 12 3.1. Radio Frequency Exposure Evaluation §2.1091 .............................................................................................. 12 3.1.Test location ..................................................................................................................................................... 12 3.2 Evaluation Rules for FCC Standard .................................................................................................................. 12 3.3 Limits for FCC Standard .................................................................................................................................. 12 3.4 Requirements and limits for RSS Standard ...................................................................................................... 13 3.5 MPE Calculation method .................................................................................................................................. 13 3.7 Evaluation Method............................................................................................................................................ 14 3.8 Conclusion ........................................................................................................................................................ 16 3.2. Measurement uncertainties .............................................................................................................................. 17 4. ABBREVIATIONS USED IN THIS REPORT ................................................................................................. 18 5. ACCREDITATION DETAILS OF CETECOM’S LABORATORIES AND TEST SITES ......................... 18 6. INSTRUMENTS AND ANCILLARY ................................................................................................................ 19 6.1. Used equiment “CTC” ..................................................................................................................................... 19 7. VERSIONS OF TEST REPORTS (CHANGE HISTORY) ............................................................................. 22 Table of annex Total pages Annex 2: External photographs of EUT (separate document) CETECOM- TR17-1-0065901T58a 9 Annex 3: Internal photographs of EUT (separate document) AIVI_Scope2_Internal_Pictures 8 Annex 4: Test set-up photographs (separate document) CETECOM- TR17-1-0065901T58a -A4 9 The listed attachments are an integral part of this report. CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 3 of 22 1. Summary of test results The test results apply exclusively to the test samples as presented in this Report. The CETECOM GmbH does not assume responsibility for any conclusions and generalizations taken in conjunction with other specimens or samples of the type of the item presented to tests. The presented Equipment Under Test (in this report, hereinafter referred as EUT) integrates a BT BDR/EDR 2.4 GHz RF Transceiver (Hopping Mode), WLAN 2.4 GHz RF Transceiver and WLAN 5GHz RF Transceiver. Other implemented wireless technologies were not considered within this test report. Following tests have been performed to show compliance with applicable FCC Part 2.1091 and FCC Part 1.1310 of the FCC CFR 47 Rules. 1.1. Summary of tests results RF-Exposure Evaluation (separation distance user to RF-radiating element greater 20cm) References & Limits EUT EUT Test cases Port FCC Test Limit RSS Test Limit op. Result set-up Standard Standard mode RF-Field Cabinet Strength Radio + Limits: frequency RSS- Inter- §2.1091 FCC: Chapter 4 radiation 102, 1,2 1,2,3 Pass Connecting §2.1093 “general Table4 exposure Issue 5 Cables population/ Requirements (conducted) uncontrolled” environment Remark: 1.) See separate test reports & corresponding annexes for following installed technologies WLAN 2.4GHz: CETECOM_TR17-1-0065901T58a BT BDR/EDR: CETECOM_TR17-1-0065901T59a WLAN 5GHz CETECOM_TR17-1-0065901T60a 2.) Calculations based on Tune-Up Info delivered by applicant ...................................................... .................................................... Dipl.-Ing. Rachid Acharkaoui M.Sc. Ajit Phadtare Responsible for test section Responsible for test report CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 4 of 22 2. Administrative Data 2.1. Identification of the testing laboratory Company name: CETECOM GmbH Address: Im Teelbruch 116 45219 Essen - Kettwig Germany Responsible for testing laboratory: Dipl.-Ing. Rachid Acharkaoui Deputy: Dipl.-Ing. Niels Jeß 2.2. Test location 2.2.1. Test laboratory “CTC” Company name: see chapter 2.1. Identification of the testing laboratory 2.3. Organizational items Responsible for test report: M.Sc. Ajit Phadtare Responsible for project: Dipl.-Ing. Ninovic Perez Receipt of EUT: 2016-12-01 Date(s) of test: 2017-04-26 - 2017-06-09 Date of report: 2017-07-25 ----------------------------------------------------------------------------------------------------------------------------------------------------- Version of template: 13.02 2.4. Applicant’s details Applicant’s name: Robert Bosch Car Multimedia GmbH Address: Robert-Bosch-Straße 200 31137 Hildesheim Germany Contact person: Mr. Dirk Zamow 2.5. Manufacturer’s details Manufacturer’s name: please see applicant's details Address: please see applicant's details 1.2 Summary of product description FCC ID: Product name AIVIP32R0 General population/uncontrolled environment Exposure category Occupational exposure/controlled environment Conducted Output power ERP EIRP CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 5 of 22 Peak Source-based time-averaging Antenna gain details refer Chapter 1.5 2T2R MIMO 3T3R 4T4R Technology 1T1R non-MIMO 1T2R 2T1R Standalone Evaluation type Simultaneous transmission 20 cm Evaluation distance XXX cm declares by manufacturer Production Unit EUT type Engineering Unit Mobile device Device type Fixed device CFR 47 FCC Part 2.1091 CFR 47 FCC Part 1.1310 Refer rules KDB 447497 D01v06 October 23, 2015 KDB 865664 D01v01r02 October 23, 2015 1.3 Refer Rules IEEE Standard for Safety Levels with Respect to Human Exposure to Radio ANSI C95.1–1999 Frequency Electromagnetic Fields, 3 kHz to 300 GHz. KDB 447498 D01 v06 October 23, Mobile and Portable Devices RF Exposure Procedures and Equipment 2015 Authorization Policies. KDB 865664 D01v01r02 October RF Exposure Compliance Reporting and Documentation Considerations. 23, 2015 CFR 47 FCC Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. CFR 47 FCC Part 1.1310 Radiofrequency radiation exposure limits. 1.4 EUT Technologies Wireless Frequency bands Operation mode Duty cycle Technologies 850 Voice (GMSK) 1 slot 12.5% GSM 1900 Support DTM (Dual Transfer Mode) 8 1 slot (1 Up, 4 Down) 12.5% 12.5% 10 2 slots (2 Up, 4 Down) 25% 850 GPRS (GMSK) GPRS 12.5% 1900 Multi – Slot Class 25% 12 4 slots (4 Up, 4 Down) 37.5% 50% 8 1 slot (1 Up, 4 Down) 12.5% 12.5% 10 2 slots (2 Up, 4 Down) 25% 850 EDGE (8-PSK) EDGE 12.5% 1900 Multi – Slot Class 25% 12 4 slots (4 Up, 4 Down) 37.5% 50% Band II UMTS Rel.99 (Voice & Data) WCDMA Band IV HSDPA(Rel.5) 100% (UMTS) Band V HSUPA(Rel.6) CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 6 of 22 DC-HSDPA(Rel.8) HSPA+(Rel.7) 1xRTT (Voice & Data) BC0 1xEVDO Rel.0 CDMA BC1 100% 1xEVDO Rel.A (CDMA2000) BC10 1xAdvanced Support SV-DO (1xRTT-1xEVDO) Band 2 QPSK Band 4 16QAM Band 5 Band 7 Band 12 2 Uplinks 2 Downlinks Band 13 100% LTE-FDD Rel.11 Carrier 2 Uplinks 3 Downlinks Band 17 Aggregation 3 Uplinks 2 Downlinks Band 25 3 Uplinks 3 Downlinks Band 26 Band 27 Band 30 Supports SV-LTE (1xRTT-LTE) QPSK 63.3% 16QAM This device supports uplink –downlink Band 38 configuration Band 39 2 Uplinks 2 Downlinks 0-6. The Band 40 LTE-TDD Rel.11 Carrier 2 Uplinks 3 Downlinks configuration Band 41 Aggregation 3 Uplinks 2 Downlinks with highest Band 42 3 Uplinks 3 Downlinks duty cycle was used (configuration. 0 at 63.3%) Supports SV-LTE (1xRTT-LTE) 2412 – 2462 MHz IEEE 802.11b 50% 2412 – 2472 MHz 2412 – 2462 MHz IEEE 802.11g 50% 2412 – 2472 MHz 2.4GHz IEEE 802.11n 2412 – 2462 MHz 50% HT20 2412 – 2472 MHz IEEE 802.11n 2422 – 2452 MHz 50% HT40 5180 – 5240 MHz 5260 – 5320 MHz IEEE 802.11a 50% 5500 – 5700 MHz 5745 – 5825 MHz 5180 – 5240 MHz Wi-Fi IEEE 802.11n 5260 – 5320 MHz 50% HT20 5500 – 5700 MHz 5745 – 5825 MHz 5190 – 5230 MHz 5GHz IEEE 802.11n 5270 – 5310 MHz 50% HT40 5510 – 5670 MHz 5755 – 5795 MHz 5180 – 5240 MHz IEEE 802.11ac 5260 – 5320 MHz 50% VHT20 5500 – 5700 MHz 5745 – 5825 MHz 5190 – 5230 MHz IEEE 802.11ac 5270 – 5310 MHz 50% VHT40 5510 – 5670 MHz CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 7 of 22 5755 – 5795 MHz 5210 – 5210 MHz IEEE 802.11ac 5290 – 5290 MHz 50% VHT80 5530 – 5530 MHz 5775 – 5775 MHz Supports Band gap channels 1 MHz Others 2.4GHz 2402 – 2472 MHz 100% Bandwidth Version 2.1+EDR 77.5% Version 3.0+HS 77.5% Bluetooth 2.4GHz Version 4.0 100% Version 4.1+EDR 77.5% Version 4.2+EDR 77.5% 1.5 Antenna Information Wireless Frequency bands Antenna type Maximum antenna gain Technologies PIFA PCB Antenna 0 GSM 850 PIFA PCB Antenna 1 PIFA PCB Antenna 0 GSM 1900 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band II PIFA PCB Antenna 1 PIFA PCB Antenna 0 WCDMA (UMTS) Band IV PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band V PIFA PCB Antenna 1 PIFA PCB Antenna 0 CDMA800 PIFA PCB Antenna 1 CDMA (CDMA2000) PIFA PCB Antenna 0 CDMA1900 PIFA Antenna 1 PCB CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 8 of 22 PIFA PCB Antenna 0 Band 2 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 4 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 5 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 7 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 12 PIFA PCB Antenna 1 LTE-FDD PIFA PCB Antenna 0 Band 13 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 17 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 25 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 26 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 27 PIFA Antenna 1 CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 9 of 22 PCB PIFA PCB Antenna 0 Band 38 PIFA PCB Antenna 1 PIFA PCB Antenna 0 LTE-TDD Band 39 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 40 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 41 PIFA PCB Antenna 1 PIFA PCB Antenna 0 Band 42 PIFA PCB Antenna 1 PIFA PCB Antenna 0 5.3dBi gain max PIFA 2.4GHz PCB Antenna 1 PIFA PCB Antenna 2 Wi-Fi PIFA PCB Antenna 0 7.1dBi gain max PIFA 5GHz PCB Antenna 1 PIFA PCB Antenna 2 PIFA Antenna 0 PCB PIFA Others 2.4GHz Antenna 1 PCB PIFA Antenna 2 PCB PIFA Bluetooth 2.4GHz Antenna 0 5.3dBi gain max PCB CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 10 of 22 2.6. EUT: Type, S/N etc. and short descriptions used in this test report Short S/N HW SW descrip- EUT Type serial number hardware status software status tion*) Car Tuner Navigation EUT A AIVIP32R0 System with BT & 0003629 001 SW 344 (X128) WLAN Car Tuner Navigation EUT B AIVIP32R0 System with BT & 0003607 001 SW 344 (X128) WLAN *) EUT short description is used to simplify the identification of the EUT in this test report. 2.7. Auxiliary Equipment (AE): Type, S/N etc. and short descriptions AE S/N HW SW short Auxiliary Equipment Type serial number hardware status software status descrip- tion *) Cable harness reduced for power AE 1 -- -- -- -- supply only AE 2 Cable harness with loadboxes -- -- -- -- AE 3 Test Laptop -- -- -- -- *) AE short description is used to simplify the identification of the auxiliary equipment in this test report. 2.8. EUT set-ups EUT set-up Combination of EUT and AE Remarks no.*) set. 1 EUT A + AE 1 + AE3 Used for conducted tests set. 2 EUT B + AE 2 (+ AE3) Used for radiated tests EUT set-up no. is used to simplify the identification of the EUT set-up in this test report. AE3 was temporary used only for setting up the EUT into the right operating mode and was removed for testing. CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 11 of 22 2.9. EUT operating modes EUT Description of Additional information operating operating modes mode no.*) WLAN 2.4 802.11b/g/n op. 1 TX-Mode With help of special test firmware a continuous traffic mode. *2) Fixed channel modulated TX-Mode hopping With help of special test firmware a continuous traffic mode could be op. 2 off established with help of a Bluetooth base simulator. (R&S CBT32) WLAN 5 GHz 802.11a/n The EUT was put to Fixed Channel (Modulated) Continuous transmissions op. 3 TX-Mode mode with help of test software (Labtool) Fixed channel modulated *) EUT operating mode no. is used to simplify the test report. CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 12 of 22 3. Measurements 3.1. Radio Frequency Exposure Evaluation §2.1091 3.1.Test location test location  CETECOM Essen   For Evaluation instruments are not needed. Results are determined by calculation based on applicants delivered Tune-Up procedure. 3.2 Evaluation Rules for FCC Standard Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane- wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. 3.3 Limits for FCC Standard Table 1: LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) (A) Limits for Occupational/Controlled Exposure Frequency range Electric field strength Magnetic field strength Power density Averaging time [MHz) [V/m] [A/m] [mW/cm²] [minutes] 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842/f 4.89/f (900/f2)* 6 30-300 61.4 0.163 1.0 6 300-1500 -- -- 6 1500-100,000 -- -- 6 (B) Limits for General Population/Uncontrolled Exposure Frequency range Electric field strength Magnetic field strength Power density Averaging time [MHz) [V/m] [A/m] [mW/cm²] [minutes] 0.3-3.0 614 1.63 *(100) 30 3.0-30 824/f 2.19/f *(180/f²) 30 30-300 27.5 0.073 0.2 30 300-1500 - - f/1500 30 1500-100,000 - - 1.0 30 f=frequency in MHz *Plane-wave equivalent power density NOTE1: Occupational/controlled limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when an individual is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. These limits apply to amateur station licensees and members of their immediate household as discussed in the text. NOTE2: General population/uncontrolled exposures apply in situations in which the general public may be exposed, or in which persons that are exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. As discussed in the text, these limits apply to neighbours living near amateur radio stations. CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 13 of 22 3.4 Requirements and limits for RSS Standard 2.5 Exemption Limits for Routine Evaluation All transmitters are exempt from routine SAR and RF exposure evaluations provided that they comply with the requirements of sections 2.5.1 or 2.5.2. If the equipment under test (EUT) meets the requirements of sections 2.5.1 or 2.5.2, applicants are only required to submit a properly signed declaration of compliance (see Annex C). The information contained in the RF exposure technical brief may be limited to the value(s) of the maximum output power, the information that demonstrates how the maximum output power of the transmitter was derived and the rationale for the separation distances applied (see Table 1), which must be based on the most conservative exposure condition for the applicable module or host platform test procedure requirements. 2.5.2 Exemption Limits for Routine Evaluation — RF Exposure Evaluation RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows:  below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance);  at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz;  at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 0.6 W (adjusted for tune-up tolerance); RSS-102, Issue 5  at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz;  at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 5 W (adjusted for tune-up tolerance). In these cases, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. was derived. 2.6 User Manual Requirements The applicant is responsible for providing proper instructions to the user of the radio device, and any usage restrictions, including limits of exposure durations. The user manual shall provide installation and operation instructions, as well as any special usage conditions (e.g. proper accessory required, including the proper orientation of the device in the accessory, maximum antenna gain in the case of detachable antenna), in order to ensure compliance with SAR and/or RF field strength limits. For instance, compliance distance shall be clearly stated in the user manual. The user manual of devices intended for controlled use shall also include information relating to the operating characteristics of the device; the operating instructions to ensure compliance with SAR and/or RF field strength limits; information on the installation and operation of accessories to ensure compliance with SAR and/or RF field strength limits; and contact information where the user can obtain Canadian information on RF exposure and compliance. Other related information may also be included. 3.5 MPE Calculation method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 EIRP P  G S  4R 2 4R 2 S  4R 2 GNUMERIC  P Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the centre of radiation of the antenna CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 14 of 22 3.7 Evaluation Method 3.7.1 Standalone Valid for WLAN/BT Mode: • The peak power was checked on 3 frequencies (lowest/middle/highest) within each operable WiFi band and the results compared to applicant’s declared power values (tune-up info). • No duty-cycle correction factor is applicable Please find in the following tables the calculations based on applicants tune-up information for the power values. Results for FCC Standard Operation Mode Frequency on Declared Antenna Gain Declared Duty cycle Declared Equivalent MPE Limit MPE-Value Margin to Limit: Fraction for Max. channel maximum maximum EIRP Maximum conducted output conducted (Measured+ conducted power (output Co-Location Fraction- output power Tune-up) output power power x duty cycle) calculations Value within Frequency- (mW/cm^2) (dBm) (dBi) (dBm) (W) (mW) (mW/cm^2) Band (MHz) % (mW/cm^2) 2412,0 21,2 5,3 26,5 0,4457 445,7 1,0000 0,08866 0,9113 0,088660 W-LAN 2.4GHz 2437,0 21,2 5,3 26,5 100% 0,4457 445,7 1,0000 0,08866 0,9113 0,088660 0,0886605 2462,0 21,2 5,3 26,5 0,4457 445,7 1,0000 0,08866 0,9113 0,088660 2402,0 5,08 5,3 10,4 0,0109 10,9 1,0000 0,00217 0,9978 0,002171 Bluetooth 2442,0 5,08 5,3 10,4 100% 0,0109 10,9 1,0000 0,00217 0,9978 0,002171 0,0021714 BDR/ DER 2480,0 5,08 5,3 10,4 0,0109 10,9 1,0000 0,00217 0,9978 0,002171 Operation Frequency on Declared Max. positive Declared Path Loss EIRP Duty cycle Maximum Equivalent MPE-Value MPE-Value Margin Mode channel maximum tolerance Antenna Gain to ext. antenna EIRP EIRP Maximum conducted according connector (EIRP x duty Fraction for Fraction output power manufacturer' according cycle) s tune-up info manufacturer Co-location Value within calculations Frequency (dB) band (MHz) (dBm) (dB) (dBi) (dBm) (% ) (W) (mW) (mW/cm^2) (mW/cm^2) (mW/cm^2) 5180,0 100% 0,042 42,27 1,0000 0,00841 0,9916 0,0084 W-LAN 5GHz 5200,0 100% 0,042 42,27 1,0000 0,00841 0,9916 0,0084 0,0084 (20MHZ BW) 5240,0 100% 0,042 42,27 1,0000 0,00841 0,9916 0,0084 5260,0 100% 0,031 31,41 1,0000 0,00625 0,9938 0,0062 W-LAN 5GHz 5280,0 100% 0,031 31,41 1,0000 0,00625 0,9938 0,0062 0,0062 (20MHZ BW) 5320,0 100% 0,031 31,41 1,0000 0,00625 0,9938 0,0062 5500,0 100% 0,014 14,16 1,0000 0,00282 0,9972 0,0028 W-LAN 5GHz 5580,0 100% 0,014 14,16 1,0000 0,00282 0,9972 0,0028 0,0028 (20MHZ BW) 5700,0 100% 0,014 14,16 1,0000 0,00282 0,9972 0,0028 5745,0 100% 0,011 11,19 1,0000 0,00223 0,9978 0,0022 W-LAN 5GHz 5785,0 100% 0,011 11,19 1,0000 0,00223 0,9978 0,0022 0,0022 (20MHZ BW) 5825,0 100% 0,011 11,19 1,0000 0,00223 0,9978 0,0022 W-LAN 5GHz 5190,0 100% 0,029 28,58 1,0000 0,00568 0,9943 0,0057 0,0057 (40MHz BW) 5230,0 100% 0,029 28,58 1,0000 0,00568 0,9943 0,0057 W-LAN 5GHz 5270,0 100% 0,021 21,23 1,0000 0,00422 0,9958 0,0042 0,0042 (40MHz BW) 5310,0 100% 0,021 21,23 1,0000 0,00422 0,9958 0,0042 5510,0 100% 0,010 9,57 1,0000 0,00190 0,9981 0,0019 W-LAN 5GHz 5550,0 100% 0,010 9,57 1,0000 0,00190 0,9981 0,0019 0,0019 (40MHz BW) 5670,0 100% 0,010 9,57 1,0000 0,00190 0,9981 0,0019 W-LAN 5GHz 5755,0 100% 0,008 7,57 1,0000 0,00151 0,9985 0,0015 0,0015 (40MHz BW) 5795,0 100% 0,008 7,57 1,0000 0,00151 0,9985 0,0015 W-LAN 5GHz 5270,0 100% 0,034 34,43 1,0000 0,00685 0,9931 0,0069 0,0069 (80MHz BW) 5310,0 100% 0,034 34,43 1,0000 0,00685 0,9931 0,0069 5510,0 100% 0,016 15,52 1,0000 0,00309 0,9969 0,0031 W-LAN 5GHz 5550,0 100% 0,016 15,52 1,0000 0,00309 0,9969 0,0031 0,0031 (80MHz BW) 5670,0 100% 0,016 15,52 1,0000 0,00309 0,9969 0,0031 W-LAN 5GHz 5755,0 100% 0,012 12,27 1,0000 0,00244 0,9976 0,0024 0,0024 (80MHz BW) 5795,0 100% 0,012 12,27 1,0000 0,00244 0,9976 0,0024 1. Output power including tune-up tolerance; 2. Output power was adjust to duty cycle at 100% if measured duty cycle less than 98%; 3. MPE evaluate distance is 20cm from user manual provide by manufacturer; 4. Depending on output power and antenna gain only the worst case is reported; CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 15 of 22 Results for RSS Standard Operation Mode Frequency on Declared Antenna Gain Declared Duty cycle Declared Equivalent MPE Limit MPE-Value Margin to Limit: Fraction for Max. channel maximum maximum EIRP Maximum conducted output conducted (Measured+ conducted power (output Co-Location Fraction- output power Tune-up) output power power x duty cycle) calculations Value within Frequency- (mW/cm^2) (dBm) (dBi) (dBm) (W) (mW) (mW/cm^2) Band (MHz) % (mW/cm^2) 2412,0 21,2 5,3 26,5 0,4457 445,7 1,0000 0,08866 0,9113 0,088660 W-LAN 2.4GHz 2437,0 21,2 5,3 26,5 100% 0,4457 445,7 1,0000 0,08866 0,9113 0,088660 0,0886605 2462,0 21,2 5,3 26,5 0,4457 445,7 1,0000 0,08866 0,9113 0,088660 2402,0 5,08 5,3 10,4 0,0109 10,9 1,0000 0,00217 0,9978 0,002171 Bluetooth 2442,0 5,08 5,3 10,4 100% 0,0109 10,9 1,0000 0,00217 0,9978 0,002171 0,0021714 BDR/ DER 2480,0 5,08 5,3 10,4 0,0109 10,9 1,0000 0,00217 0,9978 0,002171 Maximum calculated MPE value: Lowest MPE- 1,0000 [mW/cm^2] Limit: Highest MPE 0,0887 [mW/cm^2] value: Lowest Margin to 0,9113 [mW/cm^2] limit: Operation Frequency on Declared Max. positive Declared Path Loss EIRP Duty cycle Maximum Equivalent MPE-Value MPE-Value Margin Mode channel maximum tolerance Antenna Gain to ext. antenna EIRP EIRP Maximum conducted according connector (EIRP x duty Fraction for Fraction output power manufacturer' according cycle) s tune-up info manufacturer Co-location Value within calculations Frequency (dB) band (MHz) (dBm) (dB) (dBi) (dBm) (% ) (W) (mW) (mW/cm^2) (mW/cm^2) (mW/cm^2) 5180,0 100% 0,042 42,27 1,0000 0,00841 0,9916 0,0084 W-LAN 5GHz 5200,0 100% 0,042 42,27 1,0000 0,00841 0,9916 0,0084 0,0084 (20MHZ BW) 5240,0 100% 0,042 42,27 1,0000 0,00841 0,9916 0,0084 5260,0 100% 0,031 31,41 1,0000 0,00625 0,9938 0,0062 W-LAN 5GHz 5280,0 100% 0,031 31,41 1,0000 0,00625 0,9938 0,0062 0,0062 (20MHZ BW) 5320,0 100% 0,031 31,41 1,0000 0,00625 0,9938 0,0062 5500,0 100% 0,014 14,16 1,0000 0,00282 0,9972 0,0028 W-LAN 5GHz 5580,0 100% 0,014 14,16 1,0000 0,00282 0,9972 0,0028 0,0028 (20MHZ BW) 5700,0 100% 0,014 14,16 1,0000 0,00282 0,9972 0,0028 5745,0 100% 0,011 11,19 1,0000 0,00223 0,9978 0,0022 W-LAN 5GHz 5785,0 100% 0,011 11,19 1,0000 0,00223 0,9978 0,0022 0,0022 (20MHZ BW) 5825,0 100% 0,011 11,19 1,0000 0,00223 0,9978 0,0022 W-LAN 5GHz 5190,0 100% 0,029 28,58 1,0000 0,00568 0,9943 0,0057 0,0057 (40MHz BW) 5230,0 100% 0,029 28,58 1,0000 0,00568 0,9943 0,0057 W-LAN 5GHz 5270,0 100% 0,021 21,23 1,0000 0,00422 0,9958 0,0042 0,0042 (40MHz BW) 5310,0 100% 0,021 21,23 1,0000 0,00422 0,9958 0,0042 5510,0 100% 0,010 9,57 1,0000 0,00190 0,9981 0,0019 W-LAN 5GHz 5550,0 100% 0,010 9,57 1,0000 0,00190 0,9981 0,0019 0,0019 (40MHz BW) 5670,0 100% 0,010 9,57 1,0000 0,00190 0,9981 0,0019 W-LAN 5GHz 5755,0 100% 0,008 7,57 1,0000 0,00151 0,9985 0,0015 0,0015 (40MHz BW) 5795,0 100% 0,008 7,57 1,0000 0,00151 0,9985 0,0015 W-LAN 5GHz 5270,0 100% 0,034 34,43 1,0000 0,00685 0,9931 0,0069 0,0069 (80MHz BW) 5310,0 100% 0,034 34,43 1,0000 0,00685 0,9931 0,0069 5510,0 100% 0,016 15,52 1,0000 0,00309 0,9969 0,0031 W-LAN 5GHz 5550,0 100% 0,016 15,52 1,0000 0,00309 0,9969 0,0031 0,0031 (80MHz BW) 5670,0 100% 0,016 15,52 1,0000 0,00309 0,9969 0,0031 W-LAN 5GHz 5755,0 100% 0,012 12,27 1,0000 0,00244 0,9976 0,0024 0,0024 (80MHz BW) 5795,0 100% 0,012 12,27 1,0000 0,00244 0,9976 0,0024 Maximum calculated MPE value: 5GHz Lowest MPE- 1,0000 [W/m^2] Limit: Highest MPE- 0,0084 [W/m^2] value: Margin to limit 0,9916 [W/m^2] CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 16 of 22 3.7.3 Simultaneous Transmission MPE According to KDB447498 for Transmitters used in mobile exposure conditions for simultaneous transmission operations; ∑ of MPE ratios ≤ 1.0 Bluetooth W-LAN 2,4GHz WLAN 5GHz BDR/EDR Ratio of MPE- Value/Limits 0,0886605 0,002171 0,0084 W-LAN 2,4GHz 0,0886605 -- 0,090832 0,0970605 Bluetooth 0,0021714 -- BDR/EDR 0,0908319 0,0105714 WLAN 5GHz 0,0084 -- 0,0970605 0,010571 Maximum Value 0,0970605 3.8 Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. The measurement results comply with the RSS-102, Issue 5. CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 17 of 22 3.2. Measurement uncertainties The reported uncertainties are calculated based on the standard uncertainty multiplied with the appropriate coverage factor k, such that a confidence level of approximately 95% is achieved. For uncertainty determination, each component used in the concrete measurement set-up was taken in account and it’s contribution to the overall uncertainty according it’s statistical distribution calculated. Following table shows expectable uncertainties for each measurement type performed. Calculated uncertainty based on a RF-Measurement Reference Frequency range Remarks confidence level of 95% Conducted emissions 9 kHz - 150 kHz 4.0 dB CISPR 16-2-1 - (U CISPR) 150 kHz - 30 MHz 3.6 dB Radiated emissions 30 MHz - 1 GHz 4.2 dB CISPR 16-2-3 E-Field Enclosure 1 GHz - 18 GHz 5.1 dB Disturbance power CISPR 16-2-2 30 MHz - 300 MHz - - Substitution Power Output radiated - 30 MHz - 4 GHz 3.17 dB method Cel- Cel- Set-up No. BT1 W1 W2 C1 C2 Power Output conducted - 9 kHz - 12.75 GHz N/A 0.60 -- -- -- - 12.75 - 26.5GHz N/A 0.82 -- -- -- Conducted emissions - 9 kHz - 2.8 GHz 0.70 N/A -- -- -- N/A - not on RF-port 2.8 GHz - 12.75GHz 1.48 N/A -- -- -- applicable 12.75 GHz - 18GHz 1.81 N/A -- -- -- 18 GHz - 26.5GHz 1.83 N/A -- -- -- 0.1272 ppm (Delta Marker) Frequency Occupied bandwidth - 9 kHz - 4 GHz error 1.0 dB Power - 0.1272 ppm (Delta Marker) Frequency Emission bandwidth 9 kHz - 4 GHz error - See above: 0.70 dB Power Frequency stability - 9 kHz - 20 GHz 0.0636 ppm - 150 kHz - 30 MHz 5.0 dB Magnetic Radiated emissions 30 MHz - 1 GHz 4.2 dB field - Enclosure 1 GHz - 20 GHz 3.17 dB E-field Substitution Table: measurement uncertainties, valid for conducted/radiated measurements CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 18 of 22 4. Abbreviations used in this report The abbreviations ANSI American National Standards Institute AV , AVG, CAV Average detector EIRP Equivalent isotropically radiated power, determined within a separate measurement EGPRS Enhanced General Packet Radio Service EUT Equipment Under Test FCC Federal Communications Commission, USA IC Industry Canada n.a. not applicable Op-Mode Operating mode of the equipment PK Peak RBW resolution bandwidth RF Radio frequency RSS Radio Standards Specification, Dokuments from Industry Canada Rx Receiver TCH Traffic channel Tx Transmitter QP Quasi peak detector VBW Video bandwidth ERP Effective radiated power 5. Accreditation details of CETECOM’s laboratories and test sites Ref.- Accreditation Valid for laboratory area or test site No. Certificate Accreditation Body - D-PL- DAkkS, Deutsche All laboratories and test sites of CETECOM GmbH, Essen 12047-01-01 Akkreditierungsstelle GmbH 337 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) FCC, Federal Communications 487 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) MRA US-EU Commission 558 Radiated Measurements above 1 GHz, 3 m (FAR) 0003 Laboratory Division, USA 348 Mains Ports Conducted Interference Measurements 348 Telecommunication Ports Conducted Interference Measurem. 337 3462D-1 Radiated Measurements 30 MHz to 1 GHz, 3 m / 10 m (OATS) 487 3462D-2 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) IC, Industry Canada Certification 550 3462D-2 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) and Engineering Bureau 558 3462D-3 Radiated Measurements above 1 GHz, 3 m (FAR) 487 R-2666 Radiated Measurements 30 MHz to 1 GHz, 3 m (SAR) VCCI, Voluntary Control Council 550 G-301 Radiated Measurements 1 GHz to 6 GHz, 3 m (SAR) for Interference by Information 348 C-2914 Mains Ports Conducted Interference Measurements Technology Equipment, Japan 348 T-1967 Telecommunication Ports Conducted Interference Measurem. OATS = Open Area Test Site, SAR = Semi Anechoic Room, FAR = Fully Anechoic Room CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 19 of 22 6. Instruments and Ancillary 6.1. Used equiment “CTC” The “Ref.-No” in the left column of the following tables allows the clear identification of the laboratory equipment. 6.1.1. Test software and firmware of equipment Ref.-No. Equipment Type Serial-No. Version of Firmware or Software during the test 001 EMI Test Receiver ESS 825132/017 Firm.= 1.21 , OTP=2.0, GRA=2.0 012 Signal Generator (EMS-cond.) SMY 01 839069/027 Firm.= V 2.02 013 Power Meter (EMS cond.) NRVD 839111/003 Firm.= V 1.51 017 Digital Radiocommunication Tester CMD 60 M 844365/014 Firmware = V 3.52 .22.01.99, DECT = D2.87 13.01.99 053 Audio Analyzer UPA3 860612/022 Firm. V 4.3 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 Firm.= V 3.1DHG 140 Signal Generator SMHU 831314/006 Firm.= 3.21 261 Thermal Power Sensor NRV-Z55 825083/0008 EPROM-Datum 02.12.04, SE EE 1 B 262 Power Meter NRV-S 825770/0010 Firm.= 2.6 263 Signal Generator SMP 04 826190/0007 Firm.=3.21 UNIT Firmware= 4.04, SW-Main=4.04, SW-BBP=1.04, 295 Racal Digital Radio Test Set 6103 1572 SW-DSP=1.02, Hardboot=1.02, Softboot=2.02 R&S Test Firmware =3.53 /3.54 (current Testsoftw. f. 298 Univ. Radio Communication Tester CMU 200 832221/091 all band used 323 Digital Radiocommunication Tester CMD 55 825878/0034 Firm.= 3.52 .22.01.99 335 CTC-EMS-Conducted System EMS Conducted - EMC 32 V 8.52 340 Digital Radiocommunication Tester CMD 55 849709/037 Firm.= 3.52 .22.01.99 355 Power Meter URV 5 891310/027 Firm.= 1.31 365 10V Insertion Unit 50 Ohm URV5-Z2 100880 Eprom Data = 31.03.08 366 Ultra Compact Simulator UCS 500 M4 V0531100594 Firm. UCS 500=001925/3.06a02, rc=ISMIEC 4.10 371 Bluetooth Tester CBT32 100153 CBT V5,30+ SW-Option K55, K57 377 EMI Test Receiver ESCS 30 100160 Firm.= 2.30, OTP= 02.01, GRA= 02.36 378 Broadband RF Field Monitor RadiSense III 03D00013SNO-08 Firm.= V.03D13 389 Digital Multimeter Keithley 2000 0583926 Firm. = A13 (Mainboard) A02 (Display) Firm.= 4.50 #005, IPL=4.01#001,OS=4.02#001, 392 Radio Communication Tester MT8820A 6K00000788 GSM=4.41#013, W-CDMA= 4.54#004, scenario= 4.52#002 R&S Test Firmware Base=5.14, Mess-Software= 436 Univ. Radio Communication Tester CMU 200 103083 GSM:5.14 WCDMA:5.14 (current Testsoftw. F. all band 441 CTC-SAR-EMI Cable Loss System EMI field (SAR) - EMC 32 Version 8.52 442 CTC-SAR-EMS System EMS field (SAR) - EMC 32 Version 8.40 System CTC-FAR-EMI- 443 CTC-FAR-EMI-RSE - Spuri 7.2.5 or EMC 32 Ver. 9.15.00 RSE 444 CTC-FAR-EMS field System-EMS-Field (FAR) - EMC 32 Version 9.15.00 R&S Test Firmware Base=5.14, GSM=5.14 460 Univ. Radio Communication Tester CMU 200 108901 WCDMA=5.14 (current Testsoftw.,f. all band to be used, 489 EMI Test Receiver ESU40 1000-30 Firmware=4.43 SP3, Bios=V5.1-16-3, Spec. =01.00 491 ESD Simulator dito ESD dito dito307022 V 2.30 524 Voltage Drop Simulator VDS 200 0196-16 Software Nr: 000037 Version V4.20a01 526 Burst Generator EFT 200 A 0496-06 Software Nr. 000034 Version V2.32 527 Micro Pulse Generator MPG 200 B 0496-05 Software-Nr. 000030 Version V2.43 528 Load Dump Simulator LD 200B 0496-06 Software-Nr. 000031 Version V2.35a01 R&S Test Firmware Base=5.14, GSM=5.14 546 Univ. Radio Communication Tester CMU 200 106436 WCDMA=5.14 (current Testsoftw.,f. all band to be used R&S Test Firmware Base=V5.1403 (current Testsoftw., 547 Univ. Radio Communication Tester CMU 200 835390/014 f. all band used, GSM = 5.14 WCDMA: = 5.14 584 Spectrum Analyzer FSU 8 100248 2.82_SP3 R&S Test Firmware Base=5.01, GSM=5.02 WCDMA= 597 Univ. Radio Communication Tester CMU 200 100347 not installed, Mainboard= µP1=V.850 598 Spectrum Analyzer FSEM 30 831259/013 Firmware Bios 3.40 , Analyzer 3.40 Sp 2 607 Signal Generator SMR 20 832033/011 V1.25 620 EMI Test Receiver ESU 26 100362 4.43_SP3 642 Wideband Radio Communication Tester CMW 500 126089 Setup V03.26, Test programm component V03.02.20 670 Univ. Radio Communication Tester CMU 200 106833 µP1 =V8.50, Firmware = V.20 689 Vector Signal Generator SMU200 100970 02.20.360.142 CBT V 5.40, FW: V.2.41 (FPGA Digital, V. 3.09 FPGA 692 Bluetooth Tester CBT 32 100236 RF) CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 20 of 22 6.1.2. Single instruments and test systems Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 001 EMI Test Receiver ESS 825132/017 Rohde & Schwarz 12 M - 16.05.2018 005 AC - LISN (50 Ohm/50µH, test site 1) ESH2-Z5 861741/005 Rohde & Schwarz 12 M - 15.05.2018 007 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 892563/002 Rohde & Schwarz 12 M - 17.05.2018 009 Power Meter (EMS-radiated) NRV 863056/017 Rohde & Schwarz 24 M - 15.05.2019 016 Line Impedance Simulating Network Op. 24-D B6366 Spitzenberger+Spies 36 M - 30.05.2019 020 Horn Antenna 18 GHz (Subst 1) 3115 9107-3699 EMCO 36/12 M - 31.07.2017 021 Loop Antenna (H-Field) 6502 9206-2770 EMCO 36 M - 30.04.2018 030 Loop Antenna (H-field) HFH-Z2 879604/026 Rohde & Schwarz 36 M - 30.04.2018 033 RF-current probe (100kHz-30MHz) ESH2-Z1 879581/18 Rohde & Schwarz 24 M - 15.05.2019 057 relay-switch-unit (EMS system) RSU 494440/002 Rohde & Schwarz pre-m 1a 060 power amplifier (DC-2kHz) PAS 5000 B6363 Spitzenberger+Spies - 3 WRCT 1900/2200-5/40- 066 notch filter (WCDMA; FDD1) 5 Wainwright GmbH 12 M 1g 30.06.2017 10EEK 086 DC - power supply, 0 -10 A LNG 50-10 - Heinzinger Electronic pre-m 2 087 DC - power supply, 0 -5 A EA-3013 S - Elektro Automatik pre-m 2 091 USB-LWL-Converter OLS-1 007/2006 Ing. Büro Scheiba - 4 099 passive voltage probe ESH2-Z3 299.7810.52 Rohde & Schwarz 36 M - 30.04.2018 100 passive voltage probe Probe TK 9416 without Schwarzbeck 36 M - 30.04.2018 110 USB-LWL-Converter OLS-1 - Ing. Büro Scheiba - 4 119 RT Harmonics Analyzer dig. Flickermeter B10 G60547 BOCONSULT 36 M - 30.05.2019 133 horn antenna 18 GHz (Meas 1) 3115 9012-3629 EMCO 36 M 1c 10.03.2020 134 horn antenna 18 GHz (Subst 2) 3115 9005-3414 EMCO 36 M - 10.03.2020 136 adjustable dipole antenna (Dipole 1) 3121C-DB4 9105-0697 EMCO 36 M - 30.04.2018 140 Signal Generator SMHU 831314/006 Rohde & Schwarz 24 M - 30.05.2018 248 attenuator SMA 6dB 2W - Radiall pre-m 2 249 attenuator SMA 10dB 10W - Radiall pre-m 2 252 attenuator N 6dB 12W - Radiall pre-m 2 256 attenuator SMA 3dB 2W - Radiall pre-m 2 257 hybrid 4031C 04491 Narda pre-m 2 260 hybrid coupler 4032C 11342 Narda pre-m 2 261 Thermal Power Sensor NRV-Z55 825083/0008 Rohde & Schwarz 24 M - 30.05.2018 262 Power Meter NRV-S 825770/0010 Rohde & Schwarz 24 M - 30.05.2018 263 Signal Generator SMP 04 826190/0007 Rohde & Schwarz 36 M - 30.05.2019 265 peak power sensor NRV-Z33, Model 04 840414/009 Rohde & Schwarz 24 M - 30.05.2018 266 Peak Power Sensor NRV-Z31, Model 04 843383/016 Rohde & Schwarz 24 M - 30.05.2018 267 notch filter GSM 850 WRCA 800/960-6EEK 9 Wainwright GmbH pre-m 2 270 termination 1418 N BB6935 Weinschel pre-m 2 271 termination 1418 N BE6384 Weinschel pre-m 2 272 attenuator (20 dB) 50 W Model 47 BF6239 Weinschel pre-m 2 273 attenuator (10 dB) 100 W Model 48 BF9229 Weinschel pre-m 2 274 attenuator (10 dB) 50 W Model 47 (10 dB) 50 W BG0321 Weinschel pre-m 2 275 DC-Block Model 7003 (N) C5129 Weinschel pre-m 2 276 DC-Block Model 7006 (SMA) C7061 Weinschel pre-m 2 279 power divider 1515 (SMA) LH855 Weinschel pre-m 2 287 pre-amplifier 25MHz - 4GHz AMF-2D-100M4G-35-10P 379418 Miteq 12 M 1c 30.06.2017 291 high pass filter GSM 850/900 WHJ 2200-4EE 14 Wainwright GmbH 12 M 1c 30.06.2017 298 Univ. Radio Communication Tester CMU 200 832221/091 Rohde & Schwarz pre-m 3 300 AC LISN (50 Ohm/50µH, 1-phase) ESH3-Z5 892 239/020 Rohde & Schwarz 12 M - 17.05.2018 301 attenuator (20 dB) 50W, 18GHz 47-20-33 AW0272 Lucas Weinschel pre-m 2 302 horn antenna 40 GHz (Meas 1) BBHA9170 155 Schwarzbeck 36 M - 14.03.2020 303 horn antenna 40 GHz (Subst 1) BBHA9170 156 Schwarzbeck 36 M - 20.03.2020 331 Climatic Test Chamber -40/+180 Grad HC 4055 43146 Heraeus Vötsch 24 M - 30.10.2018 341 Digital Multimeter Fluke 112 81650455 Fluke 24 M - 30.05.2018 342 Digital Multimeter Voltcraft M-4660A IB 255466 Voltcraft 24 M - 17.05.2019 347 laboratory site radio lab. - - - 5 348 laboratory site EMI conducted - - - 5 354 DC - Power Supply 40A NGPE 40/40 448 Rohde & Schwarz pre-m 2 355 Power Meter URV 5 891310/027 Rohde & Schwarz 24 M - 30.05.2018 357 power sensor NRV-Z1 861761/002 Rohde & Schwarz 24 M - 24.05.2019 371 Bluetooth Tester CBT32 100153 R&S 36 M - 30.05.2019 373 Single-Line V-Network (50 Ohm/5µH) ESH3-Z6 100535 Rohde & Schwarz 12 M - 17.05.2018 377 EMI Test Receiver ESCS 30 100160 Rohde & Schwarz 12 M - 15.05.2018 389 Digital Multimeter Keithley 2000 0583926 Keithley 24 M - 30.04.2017 392 Radio Communication Tester MT8820A 6K00000788 Anritsu 12 M - 18.05.2018 126.0604.0003.3.3.3.2 LUFFT Mess u. 405 Thermo-/Hygrometer OPUS 10 THI 24 M - 30.03.2019 2 Regeltechnik 431 Model 7405 Near-Field Probe Set 9305-2457 EMCO - 4 436 Univ. Radio Communication Tester CMU 200 103083 Rohde & Schwarz 12 M - 24.05.2018 439 UltraLog-Antenna HL 562 100248 Rohde & Schwarz 36 M - 10.03.2020 CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 21 of 22 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due System EMI field (SAR) 441 CTC-SAR-EMI Cable Loss - CETECOM 12 M 5 05.06.2017 Cable System CTC-FAR-EMI- ETS-Lindgren / 443 CTC-FAR-EMI-RSE - 12 M 5 30.06.2017 RSE CETECOM WRCT 1850.0/2170.0- Wainwright Instruments 448 notch filter WCDMA_FDD II 5 12 M 1c 30.06.2017 5/40- GmbH WRCT 824.0/894.0-5/40- 449 notch filter WCDMA FDD V 1 Wainwright 12 M 1c 30.06.2017 8SSK 454 Oscilloscope HM 205-3 9210 P 29661 Hameg - 4 456 DC-Power supply 0-5 A EA 3013 S 207810 Elektro Automatik pre-m 2 459 DC -Power supply 0-5 A , 0-32 V EA-PS 2032-50 910722 Elektro Automatik pre-m 2 460 Univ. Radio Communication Tester CMU 200 108901 Rohde & Schwarz 12 M - 16.06.2018 463 Universal source HP3245A 2831A03472 Agilent - 4 466 Digital Multimeter Fluke 112 89210157 Fluke USA 24 M - 30.05.2018 467 Digital Multimeter Fluke 112 89680306 Fluke USA 36 M - 30.04.2018 468 Digital Multimeter Fluke 112 90090455 Fluke USA 36 M - 30.04.2018 477 ReRadiating GPS-System AS-47 - Automotive Cons. Fink - 3 480 power meter (Fula) NRVS 838392/031 Rohde & Schwarz 24 M - 16.05.2019 482 filter matrix Filter matrix SAR 1 - CETECOM (Brl) - 1d AMF-5D-02501800-25- 484 pre-amplifier 2,5 - 18 GHz 1244554 Miteq 12 M - 30.07.2017 10P System EMI field (SAR) ETS Lindgren / 487 System CTC NSA-Verification SAR-EMI - 24 M - 31.07.2017 NSA CETECOM 489 EMI Test Receiver ESU40 1000-30 Rohde & Schwarz 12 M - 18.05.2019 WRCG 1709/1786- 502 band reject filter SN 9 Wainwright pre-m 2 1699/1796- 503 band reject filter WRCG 824/849-814/859- SN 5 Wainwright pre-m 2 WRCA 800/960-02/40- 512 notch filter GSM 850 SN 24 Wainwrght 12 M 1c 30.06.2017 6EEK 517 relais switch matrix HF Relais Box Keithley SE 04 Keithley pre-m 2 523 Digital Multimeter L4411A MY46000154 Agilent 24 M - 18.05.2019 529 6 dB Broadband resistive power divider Model 1515 LH 855 Weinschel pre-m 2 530 10 dB Broadband resistive power divider R 416110000 LOT 9828 - pre-m 2 546 Univ. Radio Communication Tester CMU 200 106436 R&S 12 M - 30.03.2018 547 Univ. Radio Communication Tester CMU 200 835390/014 Rohde & Schwarz 12 M - 30.04.2017 549 Log.Per-Antenna HL025 1000060 Rohde & Schwarz 36/12 M - 31.07.2018 System CTC S-VSWR Verification SAR- System EMI Field SAR S- ETS 550 - 24 M - 31.07.2017 EMI VSWR Lindgren/CETECOM 552 high pass filter 2,8-18GHz WHKX 2.8/18G-10SS 4 Wainwright 12 M 1c 30.06.2017 557 System CTC-OTA-2 R&S TS8991 - Rohde & Schwarz 12 M 5 30.09.2016 System CTC FAR S- 558 System CTC FAR S-VSWR - CTC 24 M - 31.07.2017 VSWR 574 Biconilog Hybrid Antenna BTA-L 980026L Frankonia 36/12 M - 31.03.2019 584 Spectrum Analyzer FSU 8 100248 Rohde & Schwarz pre-m - 594 Wideband Radio Communication Tester CMW 500 101757 Rohde & Schwarz 12 M - 30.04.2017 597 Univ. Radio Communication Tester CMU 200 100347 Rohde & Schwarz pre-m - 598 Spectrum Analyzer FSEM 30 831259/013 Rohde & Schwarz 24 M - 30.04.2017 600 power meter NRVD (Reserve) 834501/018 Rohde & Schwarz 24 M - 17.05.2019 601 medium-sensitivity diode sensor NRV-Z5 (Reserve) 8435323/003 Rohde & Schwarz 24 M - 15.05.2019 602 peak power sensor NRV-Z32 (Reserve) 835080 Rohde & Schwarz 24 M - 608 UltraLog-Antenna HL 562 830547/009 Rohde & Schwarz 36 M - 31.03.2014 611 DC power supply E3632A KR 75305854 Agilent pre-m 2 612 DC power supply E3632A MY 40001321 Agilent pre-m 2 613 Attenuator R416120000 20dB 10W Lot. 9828 Radiall pre-m 2 616 Digitalmultimeter Fluke 177 88900339 Fluke 24 M - 30.05.2018 617 Power Splitter/Combiner ZFSC-2-2-S+ S F987001108 Mini Circuits - 2 618 Power Splitter/Combiner 50PD-634 600994 JFW Industries USA - 2 619 Power Splitter/Combiner 50PD-634 600995 JFW Industries, USA - 3 620 EMI Test Receiver ESU 26 100362 Rohde-Schwarz 12 M - 16.05.2018 621 Step Attenuator 0-139 dB RSP 100017 Rohde & Schwarz pre-m 2 625 Generic Test Load USB Generic Test Load USB - CETECOM - 2 201.0999.9302.6.4.1.4 627 data logger OPUS 1 G. Lufft GmbH 24 M - 30.03.2019 3 634 Spectrum Analyzer FSM (HF-Unit) 826188/010 Rohde & Schwarz pre-m 2 HDMI cable with Ethernet 637 High Speed HDMI with Ethernet 1m - KogiLink - 2 1m 638 HDMI Kabel with Ethernet 1,5 m flach HDMI cable with Ethernet - Reichelt - 2 640 HDMI cable 2m rund HDMI cable 2m rund - Reichelt - 2 641 HDMI cable with Ethernet Certified HDMI cable with - PureLink - 2 642 Wideband Radio Communication Tester CMW 500 126089 Rohde&Schwarz 12 M - 24.05.2018 644 Amplifierer ZX60-2534M+ SN865701299 Mini-Circuits - - 670 Univ. Radio Communication Tester CMU 200 106833 Rohde & Schwarz 24 M - 30.05.2018 671 DC-power supply 0-5 A EA-3013S - Elektro Automatik pre-m 2 CETECOM_TR17-1-0065901T67a

Test Report 17-1-0065901T67a, Page 22 of 22 Ref.-No. calibration Interval of Remark Equipment Type Serial-No. Manufacturer Cal due 678 Power Meter NRP 101638 Rohde&Schwarz pre-m - 683 Spectrum Analyzer FSU 26 200571 Rohde & Schwarz 12 M - 17.05.2018 Narda Safety Test 686 Field Analyzer EHP-200A 160WX30702 24 M - 29.03.2019 Solutions 687 Signal Generator SMF 100A 102073 Rohde&Schwarz 12 M - 17.05.2018 688 Pre Amp JS-18004000-40-8P 1750117 Miteq pre-m - 690 Spectrum Analyzer FSU 100302/026 Rohde&Schwarz 12 M - 16.05.2018 691 OSP120 Base Unit OSP120 101183 Rohde & Schwarz 12 M - 22.05.2018 692 Bluetooth Tester CBT 32 100236 Rohde & Schwarz 36 M - 29.05.2020 693 TS8997 CTC-Radio Lab 1_TS8997 - Rohde&Schwarz 12 M 5 06.06.2017 697 Power Splitter ZN4PD-642W-S+ 165001445 Mini-Circuits - 2 701 CMW500 wide. Radio Comm. CMW500 158150 Rohde & Schwarz 12 M - 01.05.2017 MA 4010-KT080-XPET- MA4170-KT100- 703 INNCO Antennen Mast INNCO pre-m - ZSS3 XPET- CO3000/933/3841051 704 INNCON Controller CO 3000-4port INNCO Systems GmBh pre-m - 6/L 711 Harmonic Mixer 90 GHz - 140GHz RPG FS-Z140 101004 RPG 12 M - 22.02.2018 712 Harmonic Mixer 75 GHz - 110GHz FS-Z110 101468 Rohde & Schwarz 12 M - 22.02.2018 713 Harmonic Mixer, 50 GHz - 75GHz FS-Z75 101022 Rohde & Schwarz 12 M - 22.05.2018 714 Signal Analyzer 67GHz FSW67 104023 Rohde & Schwarz 24 M - 03.03.2019 RPG Radiometer 715 Harmonic Mixer, 140 GHz - 220GHz FS-Z220 101009 12 M - 03.08.2018 Physics 716 Harmonic Mixer 220 GHz to 325 GHZ FS-Z325 101005 RPG Radiometer Physics 12 M - 13.02.2018 747 Spectrum Analyzer FSU 26 200152 Rohde & Schwarz 12 M - 18.05.2018 748 Pickett-Potter Horn Antenna FH-PP 4060 010001 Radiometer Physiscs - - 749 Pickett-potter Horn Antenna FH-PP 60-90 010003 Radiometer Physics - - 750 Pickett-Potter Horn Antenna FH-PP 140-220 010011 Radiometer Physics - - Note / remarks Calibrated during system calibration: 1a System CTC-SAR-EMS (Ref.-No. 442) 1b System-CTC-EMS-Conducted (Ref.-No. 335) 1c System CTC-FAR-EMI-RSE (Ref.-No . 443) 1d System CTC-SAR-EMI (Ref.-No . 441) 1e System CTC-OATS (EMI radiated) (Ref.-No. 337) 1f System CTC-CTIA-OTA (Ref.-No . 420) 1g System CTC-FAR-EMS (Ref.-No . 444) 2 Calibration or equipment check immediately before measurement 3 Regulatory maintained equipment for functional check or support purpose 4 calibration of this equipment Ancillary equipment without has no effect calibration onmechanical e.g. measuring result equipment or monitoring equipment 5 Test System Interval of calibration 12 M 12 month 24 M 24 month 36 M 36 month 24/12 M Calibration every 24 months, between this every 12 months internal validation 36/12 M Calibration every 36 months, between this every 12 months internal validation Pre-m Check before starting the measurement - Without calibration 7. Versions of test reports (change history) Version Applied changes Date of release -- Initial release 2017-07-01 CETECOM_TR17-1-0065901T67a


Document Created: 2017-07-25 14:02:06
Document Modified: 2017-07-25 14:02:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC