Test report_PCB 24

FCC ID: YA7-ATVT1549

Test Report

Download: PDF
FCCID_2932819

FCC Test Report (PART 24) Report No.: RF151125C03-1 FCC ID: YA7-ATVT1549 Test Model: AX9 Received Date: Nov. 25, 2015 Test Date: Nov. 26, 2015 ~ Dec. 02, 2015 Issued Date: Dec. 10, 2015 Applicant: Atrack Technology Inc. Address: 3F., No. 88, Sec. 1, Neihu Rd., Neihu Dist., Taipei City 11493 Taiwan (R.O.C.) Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) Test Location (1): No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF151125C03-1 Page No. 1 / 26 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ........................................................................................................................... 4 2 Summary of Test Results ........................................................................................................................... 5 2.1 Measurement Uncertainty ..................................................................................................................... 5 2.2 Test Site And Instruments ..................................................................................................................... 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Configuration of System under Test ...................................................................................................... 8 3.2.1 Description of Support Units ....................................................................................................... 8 3.3 Test Mode Applicability and Tested Channel Detail .............................................................................. 9 3.4 EUT Operating Conditions .................................................................................................................. 10 3.5 General Description of Applied Standards .......................................................................................... 10 4 Test Types and Results ............................................................................................................................. 11 4.1 Output Power Measurement ................................................................................................................ 11 4.1.1 Limits of Output Power Measurement ....................................................................................... 11 4.1.2 Test Procedures ......................................................................................................................... 11 4.1.3 Test Setup ................................................................................................................................. 12 4.1.4 Test Results .............................................................................................................................. 13 4.2 Frequency Stability Measurement ...................................................................................................... 14 4.2.1 Limits of Frequency Stabiliity Measurement ............................................................................. 14 4.2.2 Test Procedure ......................................................................................................................... 14 4.2.3 Test Setup ................................................................................................................................. 14 4.2.4 Test Results .............................................................................................................................. 15 4.3 Occupied Bandwidth Measurement .................................................................................................... 16 4.3.1 Test Procedure ......................................................................................................................... 16 4.3.2 Test Setup ................................................................................................................................. 16 4.3.3 Test Result ................................................................................................................................ 17 4.4 Band Edge Measurement ................................................................................................................... 18 4.4.1 Limits of Band Edge Measurement .......................................................................................... 18 4.4.2 Test Setup ................................................................................................................................. 18 4.4.3 Test Procedures ........................................................................................................................ 18 4.4.4 Test Results .............................................................................................................................. 18 4.5 Peak to Average Ratio ........................................................................................................................ 19 4.5.1 Limits of Peak to Average Ratio Measurement ........................................................................ 19 4.5.2 Test Setup ................................................................................................................................. 19 4.5.3 Test Procedures ........................................................................................................................ 19 4.5.4 Test Results .............................................................................................................................. 20 4.6 Conducted Spurious Emissions .......................................................................................................... 21 4.6.1 Limits of Conducted Spurious Emissions Measurement .......................................................... 21 4.6.2 Test Setup ................................................................................................................................. 21 4.6.3 Test Procedure ......................................................................................................................... 21 4.6.4 Test Results .............................................................................................................................. 21 4.7 Radiated Emission Measurement ....................................................................................................... 22 4.7.1 Limits of Radiated Emission Measurement .............................................................................. 22 4.7.2 Test Procedure ......................................................................................................................... 22 4.7.3 Deviation from Test Standard ................................................................................................... 22 4.7.4 Test Setup ................................................................................................................................. 22 4.7.5 Test Results .............................................................................................................................. 23 5 Pictures of Test Arrangements................................................................................................................ 25 Appendix – Information on the Testing Laboratories ................................................................................ 26 Report No.: RF151125C03-1 Page No. 2 / 26 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF151125C03-1 Original Release Dec. 10, 2015 Report No.: RF151125C03-1 Page No. 3 / 26 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Vehicle telematics Brand: ATrack Technology Inc. Test Model: AX9 Sample Status: Identical Prototype Applicant: Atrack Technology Inc. Test Date: Nov. 26, 2015 ~ Dec. 02, 2015 Standards: FCC Part 24, Subpart E The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Dec. 10, 2015 Vera Huang / Specialist Approved by : , Date: Dec. 10, 2015 Stanley Wu / Assistant Manager Report No.: RF151125C03-1 Page No. 4 / 26 Report Format Version: 6.1.1

2 Summary of Test Results Applied Standard: FCC Part 24 & Part 2 FCC Test Item Result Remarks Clause 2'41 ggg Effective Isotropic Radiated Power Pass Meet the requirement oflimit. 2.1046 . . m 24.232(d) Peak to Average Ratio Pass Meet the requirement oflimit. 2.1055 m . m 24.995 Frequency Stability Pass Meet the requirement oflimit. 2.1049 . . . m 24.238(b) Occupied Bandwidth Pass Meet the requirement oflimit. 24.238(b) Band Edge Measurements Pass Meet the requirement oflimit. 2'41 gg; Conducted Spurious Emissions Pass Meet the requirement oflimit. 21053 Meet the requirement oflimit. 2'4 938 Radiated Spurious Emissions Pass Minimum passing margin is —22.13 dB ' at 3760.00 MHz. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Expended Uncertainty Measurement Frequency (k=2) (6) Conducted Emissions at mains ports 150 kHz ~ 30 MHz 2.44 dB MHz ~ 200 MH 2.93 dB Radiated Emissions up to 1 GHz 30 z2 200 * 200 MHz ~1000 MHz 2.95 dB ~ 2.26 dB Radiated Emissions above 1 GHz 1 GHz 18 GHz 6d 18 GHz ~ 40 GHz 1.94 dB Report No.: RF151125C03—1 Page No. 5 / 26 Report Format Version: 6.1.1

2.2 Test Site And Instruments Description & Due Date of Model No. Serial No. Date of Calibration Manaufacturer Calibration Test Receiver N9038A MY51210203 Jan. 21, 2015 Jan. 21, 2016 Agilent Spectrum Analyzer N9010A MY52220314 Sep. 03, 2015 Sep. 02, 2016 Agilent Spectrum Analyzer FSU43 101261 Dec. 10, 2014 Dec. 09, 2015 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-472 Feb. 04, 2015 Feb. 04, 2016 SCHWARZBECK HORN Antenna BBHA 9120 D 9120D-969 Feb. 09, 2015 Feb. 09, 2016 SCHWARZBECK HORN Antenna BBHA 9170 9170-480 Feb. 04, 2015 Feb. 04, 2016 SCHWARZBECK Preamplifier EMC 012645 980115 Dec. 12, 2014 Dec. 11, 2015 EMCI Preamplifier EMC 184045 980116 Jan. 09, 2015 Jan. 08, 2016 EMCI Preamplifier EMC 330H 980112 Dec. 27, 2014 Dec. 26, 2015 EMCI Power Meter ML2495A 1232002 Sep. 21, 2015 Sep. 20, 2016 Anritsu Power Sensor MA2411B 1207325 Sep. 21, 2015 Sep. 20, 2016 Anritsu RF signal cable 309219/4 SUCOFLEX 104 Oct. 12, 2015 Oct. 11, 2016 HUBER+SUHNNER 2950114 RF signal cable SUCOFLEX 104 250130/4 Oct. 12, 2015 Oct. 11, 2016 HUBER+SUHNNER RF Coaxial Cable 8D-FB Cable-Ch10-01 Oct. 12, 2015 Oct. 11, 2016 Worken Software E3 NA NA NA BV ADT 6.120103 Antenna Tower MFA-440H NA NA NA MF Turn Table MFT-201SS NA NA NA MF Antenna Tower &Turn Table Controller MF-7802 NA NA NA MF Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 10. 3. The horn antenna and preamplifier (model: EMC 184045) are used only for the measurement of emission frequency above 1 GHz if tested. 4. The FCC Site Registration No. is 690701. 5. The IC Site Registration No. is IC7450F-10. Report No.: RF151125C03-1 Page No. 6 / 26 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Vehicle telematics Brand ATrack Technology Inc. Test Model AX9 Power Supply Rating 12Vdc (DC Power Supply) Modulation Type CDMA QPSK, OQPSK, HPSK Frequency Range CDMA 1851.3 ~ 1908.8 MHz Max. EIRP Power CDMA 185.52 mW Emission Designator CDMA 1M28F9W Antenna Type Fixed Internal Antenna Accessory Device Refer to Note as below Data Cable Supplied Refer to Note as below Note: 1. The EUT contains following accessory devices. Product Brand Model Description Battery East Trans Tech Co., Ltd. AB01-0006 3.7Vdc, 100mAh SHEN ZHEN BASITAI USB Cable N/A 1.2m shielded cable w/o core COMPUTER FITING CO., LTD 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF151125C03-1 Page No. 7 / 26 Report Format Version: 6.1.1

3.2 Configuration of System under Test <Radiated Emission Test & E.I.R.P. Test> DC Power EUT (Powered from DC Power Supply Supply Test table Communications Tester-Wireless *Kept in a remote area 3.2.1 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID Communications 1. Agilent E5515C MY52102544 N/A Tester-Wireless 2. DC Power Supply Topward 33010D 807748 N/A No. Signal Cable Description Of The Above Support Units 1. N/A 2. N/A Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item 1 acted as communication partner to transfer data. Report No.: RF151125C03-1 Page No. 8 / 26 Report Format Version: 6.1.1

3.3 Test Mode Applicability and Tested Channel Detail Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates, XYZ axis, and antenna ports. The worst case was found when positioned as the table below. Following channel(s) was (were) selected for the final test as listed below: Band EIRP Radiated Emission CDMA Z-plane Z-axis CDMA EUT Configure Test Item Available Channel Tested Channel Mode Mode - ERP 25 to 1175 25, 600, 1175 1xRTT - Frequency Stability 25 to 1175 600 1xRTT - Occupied Bandwidth 25 to 1175 25, 600, 1175 1xRTT - Band Edge 25 to 1175 25, 1175 1xRTT - Peak to Average Ratio 25 to 1175 25, 600, 1175 1xRTT - Condcudeted Emission 25 to 1175 600 1xRTT - Radiated Emission 25 to 1175 600 1xRTT Test Condition: Test Item Environmental Conditions Input Power Tested By EIRP 26 deg. C, 58 % RH 12Vdc Gavin Wu Frequency Stability 26 deg. C, 58 % RH 12Vdc Carlos Chen Occupied Bandwidth 26 deg. C, 58 % RH 12Vdc Carlos Chen Band Edge 26 deg. C, 58 % RH 12Vdc Carlos Chen Peak to Average Ratio 26 deg. C, 58 % RH 12Vdc Carlos Chen Condcudeted Emission 26 deg. C, 58 % RH 12Vdc Carlos Chen Radiated Emission 25 deg. C, 65 % RH 12Vdc Gavin Wu Report No.: RF151125C03-1 Page No. 9 / 26 Report Format Version: 6.1.1

3.4 EUT Operating Conditions The EUT makes a call to the communication simulator. The communication simulator station system controlled a EUT to export maximum output power under transmission mode and specific channel frequency 3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC 47 CFR Part 2 FCC 47 CFR Part 24 ANSI/TIA/EIA-603-C 2004 NOTE: All test items have been performed and recorded as per the above standards. Report No.: RF151125C03-1 Page No. 10 / 26 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Output Power Measurement 4.1.1 Limits of Output Power Measurement Mobile / Portable station are limited to 2 watts e.i.r.p. 4.1.2 Test Procedures EIRP / ERP Measurement: a. All measurements were done at low, middle and high operational frequency range. RBW and VBW is 1 MHz for GSM, GPRS & EDGE, 5 MHz for WCDMA and CDMA, and 10 MHz for LTE mode. b. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the 0.8 m height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1m to 4m to find the maximum polar radiated power. The “Read Value” is the spectrum reading the maximum power value. c. The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a tx cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to “Read Value” of step b. Record the power level of S.G. d. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn.E.R.P power can be calculated form E.I.R.P power by subtracting the gain of dipole, E.R.P power = E.I.P.R power - 2.15 dBi. Conducted Power Measurement: The EUT was set up for the maximum power with GSM, GPRS, EDGE, WCDMA, CDMA, and LTE link data modulation and link up with simulator. Set the EUT to transmit under low, middle and high channel and record the power level shown on simulator. Report No.: RF151125C03-1 Page No. 11 / 26 Report Format Version: 6.1.1

4.1.3 Test Setup EIRP / ERP Measurement: 1~4m 3m For the actual test configuration, please refer to the attached file (Test Setup Photo). Conducted Power Measurement: COMMUNICATION EUT SIMULATOR Report No.: RF151125C03-1 Page No. 12 / 26 Report Format Version: 6.1.1

4.1.4 Test Results Conducted Output Power (dBm) Band CDMA Channel 25 600 1175 Frequency (MHz) 1851.25 1880 1908.75 RC1+S055 24.14 25.05 25.36 RC3+5055 24.18 25.10 25.38 RC3+S032 (+F—SCH) 24.12 25.02 25.35 RC3+5032 (+SCH) 24.09 25.00 25.32 RC1+503, 1/8 Rate 24.06 24.98 25.31 EIRP Power (dBm) CDMA Frequency LVL Correction Polarization Plane Channel (MHz) (dBm) Factor (dB) EIRP (dBm) EIRP (mW) (H/V) 25 1851.25 —14.26 36.57 22.31 170.29 600 1880.00 —14.54 37.22 22.68 185.52 H 7 1175 1908.75 —14.96 37.18 22.22 166.80 25 1851.25 —19.65 37.65 18.00 63.11 600 1880.00 —19.22 37.58 18.36 68.60 V 1175 1908.75 —19.36 37.48 18.12 64.86 Report No.: RF151125C03—1 Page No. 13 / 26 Report Format Version: 6.1.1

4.2 Frequency Stability Measurement 4.2.1 Limits of Frequency Stabiliity Measurement The frequency stability shall be sufficient to ensure that the fundamental emission stays within the authorized frequency block. 4.2.2 Test Procedure a. Device is placed at the oven room. The oven room could control the temperatures and humidity. Power warm up is at least 15 min and power applied should perform before recording frequency error. b. EUT is connected the external power supply to control the DC input power. The test voltage range is from minimum to maximum working voltage. Each step shall be record the frequency error rate. c. The temperature range step is 10 degrees in this test items. All temperature levels shall be hold the £0.5 °C during the measurement testing. The each temperature step shall be at least 0.5 hours, consider the EUT could be test under the stability condition. NOTE: The frequency error was recorded frequency error from the communication simulator. 4.2.3 Test Setup Oven Room Communication Simulator —|— Antenna External Power Source EUT DC Power Supply Report No.: RF151125C03—1 Page No. 14 / 26 Report Format Version: 6.1.1

4.2.4 Test Results Frequency Error vs. Voltage Frequency Error (ppm) Vol oltage (Volts) Limit (ppm) CDMA 8 0.001 2.5 12 0.002 2.5 36 0.001 2.5 NOTE: The applicant defined the normal working voltage of the battery is from 8Vdc to 36Vdc. Frequency Error vs. Temperature Frequency Error (ppm) Temp. (°C) CDMA Limit (ppm) —30 0.003 2.5 —20 0.002 2.5 —10 0.002 2.5 0 0.002 2.5 10 0.001 2.5 20 —0.001 2.5 30 —0.001 2.5 40 —0.002 2.5 50 —0.002 2.5 60 —0.001 2.5 Report No.: RF151125C03—1 Page No. 15 / 26 Report Format Version: 6.1.1

4.3 Occupied Bandwidth Measurement 4.3.1 Test Procedure The EUT makes a call to the communication simulator. All measurements were done at low, middle and high operational frequency range. The communication simulator station system controlled a EUT to export maximum output power under transmission mode and specific channel frequency. Use OBW measurement function of Spectrum analyzer to measure 99 % occupied bandwidth. 4.3.2 Test Setup Communication Simulator Power Splitter Spectrum Analyzer 20 dB Attenuation PAD EUT Report No.: RF151125C03-1 Page No. 16 / 26 Report Format Version: 6.1.1

4.3.3 Test Result 99 % Occupied Frequency Bandwidth (MHz) Channel (MHz) CDMA 25 1851.25 1.2770 600 1880.00 1.2787 1175 1908.75 1.2786 Spectrum Plot of Worst Value CDMA Report No.: RF151125C03-1 Page No. 17 / 26 Report Format Version: 6.1.1

4.4 Band Edge Measurement 4.4.1 Limits of Band Edge Measurement Power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. In the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. 4.4.2 Test Setup Communication Simulator Power Splitter Spectrum Analyzer 20dB Attenuation PAD EUT 4.4.3 Test Procedures a. All measurements were done at low and high operational frequency range. b. The center frequency of spectrum is the band edge frequency and span is 1 MHz. RB of the spectrum is 13 kHz and VB of the spectrum is 51 kHz (CDMA). c. Record the max trace plot into the test report. 4.4.4 Test Results CDMA Channel 25 Channel 1175 Report No.: RF151125C03-1 Page No. 18 / 26 Report Format Version: 6.1.1

4.5 Peak to Average Ratio 4.5.1 Limits of Peak to Average Ratio Measurement In measuring transmissions in this band using an average power technique, the peak to-average ratio (PAR) of the transmission may not exceed 13 dB. 4.5.2 Test Setup COMMUNICATION SIMULATOR POWER SPLITTER SPECTRUM ANALYZER 20dB ATTENUATION PAD EUT 4.5.3 Test Procedures 1. Set resolution/measurement bandwidth ≥ signal’s occupied bandwidth; 2. Set the number of counts to a value that stabilizes the measured CCDF curve; 3. Record the maximum PAPR level associated with a probability of 0.1 %. Report No.: RF151125C03-1 Page No. 19 / 26 Report Format Version: 6.1.1

4.5.4 Test Results Peak to Average Ratio Frequency (dB) Channel (MHz) CDMA 25 1851.25 4.16 600 1880.00 4.36 1175 1908.75 3.88 Spectrum Plot of Worst Value CDMA Report No.: RF151125C03-1 Page No. 20 / 26 Report Format Version: 6.1.1

4.6 Conducted Spurious Emissions 4.6.1 Limits of Conducted Spurious Emissions Measurement The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The emission limit equal to –13 dBm. 4.6.2 Test Setup Communication Simulator Power Splitter Spectrum Analyzer 20dB Attenuation PAD EUT 4.6.3 Test Procedure a. The EUT makes a phone call to the communication simulator. All measurements were done at low, middle and high operational frequency range. b. Measuring frequency range is from 9 kHz to 19 GHz. 20 dB attenuation pad is connected with spectrum. RBW=1 MHz and VBW=3 MHz is used for conducted emission measurement. 4.6.4 Test Results CDMA Channel 600 Report No.: RF151125C03-1 Page No. 21 / 26 Report Format Version: 6.1.1

4.7 Radiated Emission Measurement 4.7.1 Limits of Radiated Emission Measurement The power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log(P) dB. The emission limit is equal to –13 dBm. 4.7.2 Test Procedure a. Substitution method is used for E.I.R.P measurement. In the semi-anechoic chamber, EUT placed on the 0.8 m height of Turn Table, rotated the table around 360 degrees to search the maximum radiation power and receiver antenna shall be rotated vertical and horizontal polarization and moved height from 1 m to 4 m to find the maximum polar radiated power. The “Read Value” is the spectrum reading the maximum power value. b. The substitution horn antenna is substituted for EUT at the same position and signals generator export the CW signal to the substitution antenna via a TX cable. Rotated the Turn Table and moved receiving antenna to find the maximum radiation power. Adjust output power level of S.G to get a Value of spectrum reading equal to “Read Value” of step a. Record the power level of S.G. c. EIRP = Output power level of S.G – TX cable loss + Antenna gain of substitution horn. d. E.R.P power can be calculated form E.I.R.P power by subtracting the gain of dipole, E.R.P power = E.I.P.R power - 2.15 dBi. NOTE: The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 1 MHz/3 MHz. 4.7.3 Deviation from Test Standard No deviation. 4.7.4 Test Setup For the actual test configuration, please refer to the attached file (Test Setup Photo). Report No.: RF151125C03-1 Page No. 22 / 26 Report Format Version: 6.1.1

4.7.5 Test Results CDMA: Report No.: RF151125C03-1 Page No. 23 / 26 Report Format Version: 6.1.1

Report No.: RF151125C03-1 Page No. 24 / 26 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF151125C03-1 Page No. 25 / 26 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF151125C03-1 Page No. 26 / 26 Report Format Version: 6.1.1


Document Created: 2017-11-21 03:18:56
Document Modified: 2017-11-21 03:18:56
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC