RF Exposure

FCC ID: Y9ZMT4610W6

RF Exposure Info

Download: PDF
FCCID_4505881

Bay Area Compliance Laboratories Corp. (Shenzhen)                           Report No.: RSZ190505001-00C

FCC §1.1307 (b) (1) &§2.1093 – RF EXPOSURE
Applicable Standard
According to FCC §2.1093 and §1.1307(b) (1), systems operating under the provisions of this section shall
be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess
of the Commission’s guideline.

According to KDB 447498 D01 General RF Exposure Guidance

The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·
[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
1. f(GHz) is the RF channel transmit frequency in GHz.
2. Power and distance are rounded to the nearest mW and mm before calculation.
3. The result is rounded to one decimal place for comparison.
4. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR
test Exclusion.

For worst case:

                         Maximum Tune-up         Calculated
        Frequency             power                            Calculated     Threshold    SAR Test
                                                  Distance
          (MHz)                                                  Value        (1-g SAR)    Exclusion
                         (dBm)      (mW)           (mm)
         467.6375          20          100           40            1.7           3.0          Yes


When standalone SAR exclusion applies to an antenna that transmits simultaneously with other antennas,
the standalone SAR value must be estimated according to the following to determine the simultaneous
transmission SAR test exclusion criteria:

[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·
[√f(GHz)/x] W/kg, for test separation distances ≤ 50 mm; where x=7.5 for 1-g SAR
So, the calculated value for FRS is 0.23 W/kg

Refer to the DSS and DTS report, the highest Calculated Value for 2.4G band is 0.13 W/kg

The sum of 2.4G&FRS transmits simultaneously calculated value is 0.23W/kg+0.13W/kg=0.36W/kg, less
than the limit 1.6W/kg


Result: Compliance




FCC Part 95                                                                                   Page 9 of 30


Bay Area Compliance Laboratories Corp. (Shenzhen)                   Report No.: RSZ190505001-00C


                                        Calculated Distance: 40mm




FCC Part 95                                                                        Page 10 of 30



Document Created: 2019-11-11 07:41:01
Document Modified: 2019-11-11 07:41:01

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC