Users Manual

FCC ID: Y4N70208R

Users Manual

Download: PDF
FCCID_1898123

70208 Complete Operating Instructions IMPORTANT: Keep instructions for future reference.

TABLE OF CONTENTS INTRODUCTION Introduction 1 Congratulations on the purchase of this MobiCam® DXR Touch Monitoring System, which incorporates the latest advanced technology. To fully maximi- Radio Interferece Parameters 1 ze and benefit from this product’s avanced features we hightly recommend Package Contents 2 you review these instructions. This 2.4 GHz Digital monitor enables you to Monitor/Receiver 2 transmit picture and sound signals cordlessly, which is ideal for many situa- tions suchs as monitoring a baby, young children or the elderly or used as Camera/Transmitter 3 office or warehouse monitoring system. To Start Charging/Powering On 4 IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty. Locking the Screen 4 Set to Another Language 4 Pairing Camera and Monitor 5 RADIO INTERFERENCE PARAMETERS Main Menu 6 FCC Statement Touch Navigation 15.19: This device complies with part 15 of the FCC Rules. Operation is subject Volume/Display 7 to the following two conditions: (1) This device may not cause harmful inter- Lullabys 7 ference and (2) This device must accept any interference received, including Night Light 7 interference that may cause undesired operation. 15.21: Changes or modifications not expressly approved by the party respon- Record 8 sible for compliance could void the user’s authority to operate the equipment. Play 9 Quad and Channel View 10 FCC Radiation Exposure Statement VOX (Voice Activation) 10 This equipment has been tested and complies with Federal Communications Commission radiation exposure limits as set forth for uncontrolled environ- Settings ments. This equipment should be installed and operated with minimum Monitor Settings 11-14 distance 20cm between the radiator and your body. This Camera must not Camera Settings 15 be co-located or operating in conjunction with any other antenna or Cam- Per Camera and Convenience Icons 16 era. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be Webcam Use • Data/File Transfers 17 co-located or operating in conjunction with any other antenna or Camera. Audio/Video Out 18 This device has been tested for compliance with FCC RF Exposure (SAR) limits Troubleshooting 18 in the typical laptop computer configuration and this device can be used in desktop or laptop computers via side mounted USB slots. This device and its Factory Default Settings 19 antenna must not be co-located or operated in conjunction with any other Battery Replacement 20 antenna or Camera. Product Safety 20 IC Statement Proper Disposal 21 Operation of this device is subject to the following two conditions: 1. This Limited Warranty 21 device may not cause interference, and 2. This device must accept any inter- About Mobi® / Contact Mobi® 22 ference, including interference that may cause undesired operation of the device. 1

PACKAGE CONTENTS CAMERA • 1 Monitor/Receiver • 1 Camera/Transmitter Camera Lens • 2 AC/DC Adaptors 5V 800mAh • 1 Li-Ion Rechargeable Battery (for monitor only) • 1 Attachable Strap Mount • 1 Door/Drawer Attachable Hook Retractable Night Vision Antenna IR LEDs • 1 Wall Anchor Mount with Screw • 1 USB to Mini USB Data Cord • 1 AV-Out Cable • 1 User Manual PAIR Button Night Light MONITOR ON / OFF Button Power ON 2-Way Talk ON/OFF LED Indicator Retractable Speaker Button Power ON Antenna DC Power LED Indicator Input Escape/Menu Button Battery Compartment Microphone Strap Mount (underneath) Ridge-Grip 2-Way Talk / 2-Way Talk Surface Stand Lullaby Speaker Button Battery AV Output Compartment Camera / Transmitter Unit PAIR Lock Screen features: A. B. SD Card Slot Button Button • PAIR Button (card not included) • LED for Power ON / Pairing (flashes) Combo • Microphone & Speaker 2-Way Talk Screen Cover / • DC Input (AC/DC adaptor included) Microphone Fold-back Stand • Night Vision DC Power Input / Mini USB Output • Temperature Sensor and Alarm • VOX (Hi/Mid/Lo/Off ) with receiver control • Adjustable Volume from receiver Monitor / Receiver Unit • Adjustable TX Power (High-Low) from receiver features: • 4 Lullaby choices • 3.5” QVGA resolution TFT touch panel screen • A/V Output port • DC Input (AC/DC adaptor included) • Night Light • VGA resolution (640*480) up to 25 frames per second • Two-Color LED: solid green for power on; • Rechargeable Battery 3.7V 1500 mAh • up to 250-300m range flashing red for charging (not included - sold separately) • 2.4GHz Digital FHSS, 100% secure with full C. D. • 2-way communication • Quad-View split screen (up to 4 camera • MENU/ESCAPE button capability) privacy and interference free • PAIR Button • Main Menu color icon display Positioning / Mounting Options • TALK Button • Rechargeable Li-ion Battery 3.7V 1200 mAh A. Horizontal to Slightly Angled Surfaces - Built-in Ridge-Grip Feet… B. Wall Mount Screw with • Lock Screen Button for disabling touch screen (included for monitor only) Drywall Anchor (included)… C. Door or Drawer Hook Mount / Stand (included)… D. Horizontal • SD Card Slot up to 32 Gb (not included) Rails / Drawer Handles - Attachable Strap Mount (included) • Mini USB Output port (for connection to a PC and charging) WARNING: To prevent strangulation never place a power cord within reach of a child. 2 3

TO START A. Plug one of the AC/DC adapters (they are interchangeable) into the monitor and allow it to PAIRING: The monitor and camera are paired (wirelessly linked) by the manufacturer at the fac- charge the Monitor Battery for at least 5-1/2 hours. tory. If you ever need to relink the camera, or you want to pair Additional Cameras (sold separately) B. Plug the other AC/DC adapter into the camera. Turn the Camera On by holding the ON/OFF you need to pair each following this sequence: Button down for several seconds. The green “Power On” Indicator lights when powered up. C. Turn the Monitor On by holding its ON/OFF Button down for several seconds. Its “Power On” NOTE: Before pairing be sure the camera and monitor are both turned on and both are Indicator will light up (green on battery power, red when charging) and the Mobi logo will within 10 feet of each other. appear on the screen. D. Press ESC Button to go to the Main Menu. NOTE: While viewing the Main Menu, if no buttons are pressed, or the screen is not touched after 30 seconds, the monitor will automatically exit the Main Menu mode. Main Menu E. Press ESC Button once again to go to the Camera View. Along the top and bottom of the screen, small “Per Camera” Icons (ex- plained on page 16) will appear over the view from the camera, which should be on and paired with the monitor. IMPORTANT: Use ONLY a fingertip or other NON- SHARP object to select touch screen options. Camera View Using sharp objects can damage the screen and void the warranty. 1. Power On the Monitor and Camera 2. Press and hold the Pair Button on the back of the Monitor until the Pair Screen is displayed, LOCKING THE SCREEN: If you press the Lock Screen Button a LOCK icon will appear and the then release the button. touch-screen function will be disabled. Pressing the Lock Screen Button again will revert it back to normal touch-screen function. 3. Press and release the Pair Button on the Monitor and select a camera number (1-4) to be paired. The word “Pairing” appears below the icon of the selected camera as it waits to be paired. TO SET TO ANOTHER LANGUAGE: The monitor is set to English by default. The MobiCam® DXR Touch can also display in French, German, Portuguese, Spanish, or Italian. To change the 4. You have 10 seconds to press and hold the Pair Button on the back of the Camera to com- language follow this sequence: press the ESC Button plete Pairing, otherwise restart from step 2 above. touch Setting icon touch System Setting 5. The word “OK” or “Failed” will be displayed on screen. touch slider to See More List select Language from the list 6. Press the ESC Button or the Return icon to go back. To pair additional cameras repeat select a new Language the steps above. press the ESC Button 4 5

MAIN MENU ... touch the ESC Button to open the Main Menu on screen TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen from Main Menu ... ... to These Screens ... ... to Do This ... options. Using sharp objects can damage the screen and void the warranty. Touch the appropriate icon to access all Settings and Options. VOLUME / DISPLAY touch – or + icons to adjust... Monitor Volume VOLUME / DISPLAY LULLABYS NIGHT LIGHT RECORD Screen Contrast adjust select select select Screen Brightness • Sound Volume • Camera Number • Camera Number • Record Video • Screen Contrast • Lullaby Choice • Night Light On • Take Photo • Screen Brightness • Lullaby Volume • Night Light Off • Format SD Card • SD Information • Time/Date Stamp select a Camera... LULLABYS select one of four Lullabys and/or... deactivate all Lullabys... adjust Lullaby Volume PLAY QUAD / CHANNEL VOX (Voice Activation) SETTINGS select / play select select for the Camera • Recorded Video • Quad View • Camera Number • Temperature Alarm select Night Light icon for the camera NIGHT LIGHT you wish to control in order to... • Recorded Photo • Specific CAMs • VOX On/Off • TX Power/Volume • Delete Files • Switch CAMs • Sound Sensitivity turn the Night Light ON • Auto Record On/Off turn the Night Light OFF (the light bulb image in the icon SETTINGS • Zoom/Pan/Tilt • 6 Languages • Date/Time changes to yellow when ON and back again when OFF) for the Monitor • Screen Timeout • Reset to Default • Time Alarm • USB Output • Touch Calibration • About / Version • Auto Switch Time • Recording Schedule • SD Card Update • Date/Time • AV Out Format HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. 6 7

TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... from Main Menu ... ... to These Screens ... ... to Do This ... touch to select one of two options... RECORD touch one of four functions... PLAY Photo Video or Picture goes to camera view and you can select Video or Picture take a photo of the scene by touch- ing this Still Camera select a folder for the Date of the icon Recording (year/month/day) NOTE: All recording functions require an SD memory card with select a Video or Picture File to available space (max Play or View 32 Gb) to be in the SD card slot on the monitor. Video goes to the camera view and you can record a video (with sound) of the scene by touching this REC icon to start recording - and press again to stop recording NOTE: While recording no other functions are as you view a Recorded Video file available until record- SD Format the screen will also show... ing is stopped. lets you Format / Erase an SD memory card Return icon (upper left) - used to exit the playback at any time Elapsed Time / Total Play Time / select OK and Date-Time Stamp (upper or Cancel right) Video Play controls (bottom center) Delete icon (bottom right) when the Delete icon is touched you see this to confirm file deletion with an OK SD Info displays Total Size, Used Space, and Free Space on any SD card you may have in the SD card slot HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. 8 9

TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... from Main Menu ... ... to These Screens ... ... to Do This ... QUAD / CHANNEL choose from these options... SETTINGS Monitor Setting on the Setting Screen, simply touch Single Camera View the System Setting icon (at the top) select a Camera icon (1- 4, which to access monitor functions... will be shown in color and active if paired)to be your constant channel if choosing Single Camera View NOTE: All cameras must be Paired to the monitor for view- ing access. (Refer to Quad View From the Monitor Setting list... Pairing on page 5.) select the Quad icon and see all select Date/Time currently paired cameras (up to 4) touch any value, then touch the arrows NOTE: In Quad mode, simutaniously to adjust value up or down touching any active camera image changes press OK to save changes to that full screen single HINT: To move back one screen camera view. Also sound touch the Return icon... only from the last came- or go to camera view by pressing ra in full screen mode the ESC Button. can be monitored. NOTE: In Auto Scan Auto Scan View mode (indicated by select the Auto Scan icon to go to a From the Monitor Setting list... this symbol) you can full view from each paired camera select which cameras touch Time Alarm to include and the scan (up to 4) as they change from one to the next touch any value, then touch the arrows time between each camera. (Refer to Auto to adjust value up or down Switch Time on page 11.) touch Alarm On or Alarm Off touch OK to set VOX Sound Activated Mode (VOX) Sound Activated Monitoring select a paired Camera icon (the ones in color) select from 3 options... From the Monitor Setting list... touch Auto Switch Time VOX (set to On or Off) select a camera switching interval NOTE: VOX keeps monitor Sound Sensitivity (5 sec to 60 sec) (picture and sound) off (set to High, Med or Low) check the cameras to be included in until the camera detects a sound, which automatic- Sound-Activated Recording auto switching mode ally turns the monitor back (set to Yes or No) touch OK to set on. This helps prevent false alarms and allows parents more rest. HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. 10 11

TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... from Main Menu ... ... to These Screens ... ... to Do This ... SETTINGS (cont.) Monitor Setting (cont.) SETTINGS (cont.) Monitor Setting (cont.) From the Monitor Setting list... From the Monitor Setting list... select TV Out Format touch Video Off Timeout choose either PAL or NTSC video touch the timer icon to choose format (US standard is NTSC) between non-active (X) or active (no X) Timeout Mode touch OK to set if active, touch the – or + icons to set the limit at which time the video will automatically Timeout (turn off) From the Monitor Setting list... select Recording Schedule From the Monitor Setting list... select Touch Calibration touch any value and then touch the up and down arrows to adjust time touch the + icons as they appear in each corner of the screen (this cali- to activate press On brates the monitor for best touch (or OFF to deactivate) screen accuracy) once all four corners are touched, tap EXIT to return to the Monitor Setting list From the Monitor Setting list... select Zoom/Pan/Tilt and go to the camera scene with Zoom/Pan/Tilt From the Monitor Setting list... icons overlaying the image... touch USB Output to Zoom-In touch the + icon Language select the Top icon for Charging the Zoom/Pan/Tilt (maximum of 3.0 - to -1 enlargement) monitor via the AC Adapter (included) to Zoom-Out touch the – icon select the Middle icon to use the sys- tem as a USB Webcam on a PC* via to Pan or Tilt touch the arrow icons the USB Data Cable (included) or... (you can Pan or Tilt only after you have zoomed in) select the bottom icon for PC file transfer mode to or from an SD Card in the monitor via the included USB NOTE: Press the ESC Button to return Data Cable to the video image without Zoom/ Pan/Tilt icons overlaying it. touch OK to set * See page 17 for details on using the USB Output for viewing video or transferring video or photo files to a PC. HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. 12 13

TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu TOUCH NAVIGATION ... touch the ESC Button to start at Main Menu from Main Menu ... ... to These Screens ... ... to Do This ... from Main Menu ... ... to These Screens ... ... to Do This ... SETTINGS (cont.) Camera Settings SETTINGS (cont.) Monitor Setting (cont.) on the Setting Screen, simply touch From the Monitor Setting list... the Camera icon (on the bottom line) for the one you wish to control NOTE: Though shown here for refer- the settings for... ence, this function to be used ONLY Language for Updating System Firmware, to NOTE: Only Paired camera icons be downloaded and put onto an SD will show in color and be active card, in order to be installed using this for touch control. option. Specific instructions will be provided to registered users regarding any new firmware. From the Camera Setting screen... touch Temperature/Alarm From the Monitor Setting list... set ºF or ºC (default is ºF) touch Language touch the thermometer icon Language Language touch one of the 6 specific Languages set the maximum and minimum English you want the monitor to show in all alarm temperature range French text displays German set the Alarm to be On or Off Portuguese Spanish if On, set the Alarm Time (from 5 to Italian 60 seconds) NOTE: When the room temperature (where the camera is) goes above or below the temperature range you From the Monitor Setting list... set, the monitor will sound an alarm touch Factory Default and the small Temperature icon on choose OK to reset all settings, or the monitor screen will flash showing Language Cancel if you change your mind the out-of-range temperature in that room. The ESC Button will temp- orarily silence the repeating alarm until the temperature returns to the set range, or you turn the Alarm Off from this screen. From the Monitor Setting list... From the Camera Setting list... touch About & Version touch Tx Power/Volume Language here you will see the product name adjust the Camera Speaker Volume and manufacturer, and the latest (top icon) up or down for the Two- version of the installed firmware Way Talk function set the Transmit Range Power (lower icon) on High or Low HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. HINT: To move back one screen touch Return icon or go to camera view by pressing the ESC Button. 14 15

INDIVIDUAL CAMERA and CONVENIENCE ICONS WEBCAM USE IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen To view a larger version of the monitor screen on your PC* screen... options. Using sharp objects can damage the screen and void the warranty. Note: Using this feature allows viewing only on the computer. Once USB Connection is established the monitor screen is turned off and all features and buttons (with the Specific small icons are created for each paired camera at the top edge of the screen which relate exception of the ESC Button) will not be functional. to that individual camera (except Battery Level, which is for the monitor only). To use them... 1. set the USB Output on the monitor to the Webcam icon (refer to page 13) just observe or touch one of the following Individual Camera icons to either... 2. using the USB Cord (included), connect the monitor to an available USB port on your PC* A... view current Camera Number, or change to the next camera you want to view 3. wait for your computer to automatically recognize and install the appropriate drivers and you B... view current VOX level, or change VOX sound sensitivity level for that camera receive a Successful Installation message. C... view Lullaby status, change the Lullaby selection, or turn off Lullabys from that camera 4. once you have installed the device driver, your MobiCam® DXR Touch can be utilized as a wireless webcam. D... add Zoom/Pan/Tilt controls over the scene to manipulate the image from that camera 5. once the picture from the monitor is displayed on your computer screen, pressing the ESC Button on NOTE: Other individual camera icons appear for informational purposes, such as Room the monitor toggles between Single and Quad View modes. Temperature, Switching Mode and Signal Strength, and when in Quad Mode, each camera screen shown will also display the Signal Strength of that particular camera. The DXR Touch can be used in conjunction with Skype®, Windows Messenger®, Google Talk® and Yahoo Messenger®. When utilizing Skype®, Windows Messenger®, Google Talk® or Yahoo Messenger®, please refer to their documentation for techical support. A B C D Camera VOX Lullaby Zoom / Room Switching Battery Level Signal * The MobiCam® DXR Touch is only compatable with Windows® PCs. Number Level Status Pan / Tilt Temperature Mode (On) (monitor) Strength DATA/FILE TRANSFERS To transfer photo and video files from the monitor to your PC* ... Note: Using this feature allows viewing only on the computer. Once USB Connection is established the monitor screen is turned off and all features and buttons (with the exception of the ESC Button) will not be functional. 1. set the USB Output on the monitor to the USB Connection icon (refer to page 13) 2. using the USB Cord (included), connect the monitor to an available USB port on your PC* 3. wait for your computer to automatically recognize and show the outside Memory Device. 4. you may then move or copy files from the SD Card (not included) as you normally would with any such storage device (provided one is in the monitor and has data stored on it) DATE/TIME STAMP direct to direct to direct to * The MobiCam® DXR Touch is only compatable with Windows® PCs. Year/Month/Day VOLUME PLAY RECORD Hour/Minute/Second 1 2 3 Each paired camera scene also displays Convenience Icons (shown along the bottom of the screen) so you can either view the current Date/Time Stamp or... touch and bypass the Main Menu to... 1... instantly adjust Volume controls for that camera 2... instantly access the Play Video / View Photo control panel 3... instantly Record Video from that camera...with just one touch! 16 17

AUDIO/VIDEO OUT FACTORY DEFAULT SETTINGS You can hear and see audio/video output on a TV or other AV device Item Default value Range directly from your DXR Touch monitor. Monitor setting value Simply connect the AV OUT Cord (included) to the AV OUT jack on the right side of the monitor Volume 5 0-9 and connect the other ends (three RCA connectors) to the Audio and Video Input jacks on your TV, DVR, or Camcorder, and select the appropriate input setting on that AV device. Contrast 5 0-9 The monitor screen will automatically turn off, signaling the unit is connected. Please refer to your Brightness 5 0-9 AV device manual for proper input selection and operation. Date & Time 2011/09/01,08:00 Alarm Time Off, 09:00 On , Off Date Time Stamp Off On , Off TROUBLESHOOTING Auto Switch time 5s 5s,10s,30s,1min Problem Solution Recording schedule Off On , Off Start Time : 12:00:00 Monitor will not turn on • Check AC/DC connection • Confirm power outlet is working properly Final Time: 12:11:00 • Charge Battery Pack Zoom 1.0 1.0 to 3.0 Monitor on but no picture • Confirm “Audio Only” mode is not selected TV out format PAL PAL,NTSC • Confirm “VOX” mode is OFF Monitor Video Off Timeout Off, 60s From 5s to 180s • Confirm there are no obstructions in front of camera • Confirm camera and monitor are paired properly Camera setting value VOX setting Off High, Middle, Low, Off Camera will not turn on • Check AC/DC connection • Confirm power outlet is working properly Lullaby Off Off, Lull 1, Lull 2, Lull 3, Lull 4 Temperature setting ºF ºF - ºC Battery does not recharge • Check AC/DC connection. • Check battery pack connection in the monitor. Min 59ºF - Max 86ºF 50ºF - 122ºF • Confirm power outlet is working properly • Confirm batteries are placed correctly in monitor Alarm Off On/Off, 5s,10s,30s,1m (increments) Connection is lost • Confirm monitor and camera are ON. • Confirm AC/DC adapter is connected properly Volume 5 0-9 • Confirm battery has sufficiant power. TX Power High High, Low • Place camera and monitor near each other and press camera Pair button to relink camera and monitor. Night Light Off Off, On • Reduce distance between camera and monitor. • Remove or avoid other wireless products that may be near camera or monitor. 18 19

BATTERY REPLACEMENT PROPER DISPOSAL Monitor Battery (included) Camera Battery (not included, sold separately, Mobi part If you eventually dispose of the DXR Touch Monitor, Camera, Batteries, or AC Adapters, do so in Li-Ion 3,7V 1200 mAh # 70216) Li-Ion 3,7V 1500 mAh accordance with current federal, state and local regulations. As a consumer, you may be obligated by law to recycle used batteries. Do not mix products bearing the WEEE symbol (crossed out trash bin icon) with your general household waste. For the correct collection and treatment of these products take them to the collection points designated by your local authority. Alternatively, contact the supplier that sold you the product. LIMITED WARRANTY Mobi Technologies, Inc. warrants this product to be free from defects in material and workman- ship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair. If you suspect that the product is malfunctioning or is defective, please call Mobi toll free at 1. 877. 662.4462 and ask for the Service Department. If the PRODUCT SAFETY problem still persists after consulting with our Service Department, you may return the product to obtain warranty service. Please return it to Mobi along with a dated sales receipt from the place of purchase to verify that it is within the authorized warranty period. This warranty does not cover This product is not intended to be used as a medical monitor damage caused by accident, misuse, abuse, improper maintenance, unauthorized modification, and its use should not replace adult supervision. or connection to an improper power supply. A fee may be charged for repair resulting from such damage. This warranty excludes all incidental or consequential damages and any liability other CAUTION than what is stated above. • Periodically examine this product for damage to the cord, housing or other parts that may result in the risk of fire, electric shock or serious injury. Do not operate any product with a damaged cord or plug. If the product malfunctions, or is damaged in any manner, please contact the Notes: manufacturer for examination and repair to avoid a potentially serious hazard. • Never use the camera, monitor, or AC adapters near water (i.e. bathtub, sink, etc.). • Always use the camera and the monitor where there is adequate ventilation. To prevent overheating keep the camera and the monitor away from heat sources such as radiators, heat registers, stoves, or other appliances that produce heat. • Use only a dry cotton cloth to keep the units free of dust. Do not use a damp cloth, water, or liquid cleaner of any kind. • Remove the battery from either unit during long periods of non-use, as batteries may leak. • Unplug the AC adapters from the monitor and the camera during periods of non-use. To disconnect from the electrical outlet, grip the transformer and pull from the power socket. Never remove by pulling the cord. • Only use the Monitoring System with the supplied power adapters. WARNING This product is not a toy. Keep out of reach of children. To prevent strangulation never place a power cord within reach of a child. 20 21

Mobi Technologies, Inc. 5913 Blackwelder St Culver City CA 90232 Toll Free 877.662.4462 Be sure to register this product on the Mobi website to receive firmware updates. www.getmobi.com Mobi, MobiCam, and DXR Touch are registered trademarks of Mobi Technologies, Inc. SD is a trademark of SD Association. Skype®, Windows Messenger®, Google Talk® and Yahoo Messenger® are trademarks of their respective companies. © 2013 Mobi Technologies, Inc. All Rights Reserved


Document Created: 2013-02-11 16:20:12
Document Modified: 2013-02-11 16:20:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC