Users Manual

FCC ID: Y4N-70290T

Users Manual

Download: PDF
FCCID_1621140

  Compatible  with…     Compatible  with…  

TABLE OF CONTENTS INTRODUCTION Introduction 1 Congratulations on the purchase of the Mobi® Pure Sounds™ Audio Monitor- ing System, which brings you the latest in wireless technology. We recommend Package Contents 2 that you read the instructions carefully before use. Features 3 Consumer Guide to Product 4-5 The Mobi® Pure Sounds™ enables you to transmit audio wirelessly, which is Safety ideal for monitoring a babies, young children, pets, or the elderly. Knowing your Receiver 6 Knowing Your Transmitter 7 Installation & Setup 8 Receiver/Transmitter Operation 9 Troubleshooting 10   Radio Interference Advice 11 Warranty 12 Notes 13 Your Mobi® Pure Sounds™ uses a digital transmission to ensure clear and con- sistent audio transmission. The signal also passes easily through interior walls. However, buildings with metal frames or placing the transmitter near large metal objects may cause signal degradation. If reception is poor, moving the transmitter or receiver may fix this problem. 1

PACKAGE CONTENTS FEATURES • Trasmission Range up to 600Ft 1 x Receiver Unit (#70294R) • 2.4 GHz Private Digital Transmission • No installation needed—ready to use • Compact design for easy portability • Auto Mute with Voice Activation • Low Battert and Out of Range Indicators 1 x Transmitter Unit (#70294T) • Rechargeable Batteries Included for Receiver • AC Adaptors included for Receiver and Transmittor 1 X Receiver Power Cord 1 X Transmitter Power Cord 1 x Rechargeable Battery Pack NOTE: If you find any of the contents are missing or should you need to order replace- ment parts, please contact the manufacturer or visit www.getmobi.com. 2 3

CONSUMER GUIDE TO PRODUCT SAFETY Please read this instruction manual before using your Mobi® Pure Sounds™ sys- • Always use transmitter and receiver where there is adequate tem. When using electrical appliances, basic safety precautions should always ventilation. To prevent overheating, keep away from heat sources be followed. such as radiators, heat registers, stoves, or other appliances that produce heat. Please keep safe for future reference. • Use only a dry cotton cloth to keep the Camera and Monitor units • This product is not intended to be used as a medical monitor and its free of dust. Do no use a dampened cloth, water, or liquid cleaner use should not replace adult supervision. of any kind. • Periodically examine this product for damage to the cord, housing or • Remove the battery from the Monitor during long periods of non- other parts that may result in the risk of fire, electric shock or injury. use as alkaline batteries can leak. Do not operate any product with a damaged cord or plug. If the Color Wireless Monitor malfunctions or is damaged in any manner please • Unplug the AC adaptors from the Monitor and Camera during peri contact the manufacturer for examination and repair to avoid a hazard. ods of non-use. To disconnect from the power supply, grip the transformer and pull from the power socket. Never pull by the • Never use transmitter and receiver near water (i.e. bathtub, sink, etc.). cord. • The AC adaptors are not Toys. • Replace battery with the same equivalent type. Please dispose of old, defective batteries in an environmentally friendly manner in accordance with the relevant legislation. • Only use the Monitoring System with the supplied power adaptors. 4 5

KNOWING YOUR RECEIVER KNOWING YOUR TRANSMITTER Button & LED Functions 1. Power On/Off Button 11. Power On Indicator 2. Volume Up ( + ) 3. Volume Down ( - ) 4. Sound Level Indicator (LED will flash indicating noise level increase) 5. Power On Indicator (battery charge indicator) 11 6. Link Indicator LED (LED will blink if connection is poor/lost) 7. Speaker 5 6 4 12. DC Jack (5V/600mA) 7 8. DC Jack (5V/600mA) 9. Belt Clip 10. Battery Compartment 2 3 12 10 1 9 8 6 7

INSTALLATION & SETUP RECEIVER/TRANSMITTER OPERATION The Mobi® Pure Sounds™ transmitter is designed to be powered by either Receiver Power ON/OFF rechargeable batteries (provided) or the AC/DC adaptors. Press the Power On/Off Button (fig. 1 pg. 7) to turn on your receiver. The power Using AC/DC adaptor: indicator light (fig. 5 pg. 6) will turn red indicating receiver is ON. • Plug the connector of the AC adaptor into the DC Jack on the unit (fig. 7 pg. 6, fig. 12 pg. 7). Volume Adjustment • Plug the power cord into an outlet. Press the volume up (fig. 2 pg. 6) or volume down (fig. 3 pg. 6) to adjust the • Press the Power On/Off Button (fig. 1 pg. 7) to turn ON your receiver. volume to the desired level. • The power indicator lights will illuminate indicating units are ON (fig. 5 pg. 6, fig. 11 pg. 7) LED Indicator Lights Using Batteries: • Remove the belt clip (fig.8 pg. 6) by sliding the clip downwards The Link Indicator Light (fig. 6 pg 6) • Remove the battery door on your receiver (fig. 9 pg. 6) will blink continuously if your • Plug in the supplied battery pack into your battery compartment connection to the receiver is poor or lost. • Return battery cover and belt clip to their original position The Sound Indicator Light (fig. 4 pg 6) will blink when sound levels increase Note: Battery life is between 3-4 hours. When monitoring over long periods and, in particular, overnight, it is recommended to use AC adaptors for the receiver. Auto Mute/VOX Activation Setting Your receiver is equiped with automatica mute setting. When sound levels Warning: reach a preset level the mute option will engage to conserve battery power, 1. Use on the supplied battery pack with your receiver. once the transmitter picks up noise the receiver will automatically begin trans- 2. Do not mix old and new batteries. 3. Do not mix alkaline, standard or rechargeable batteries mitting. 4. Remove the batteries during long periods of non-use. Note: If link is lost between transmitter and receiver you must place both units near each 5. Use only the AC adaptors supplied with the package. other, turn them off then on and link will resume. Note: Transmitter only functions with AC Adaptor. Transmitter Power ON/OFF Your trasmitter will automatically turn ON once you plug in the AC/DC adaptor (fig. 12 pg. 7) 8 9

TROUBLESHOOTING RADIO INTERFERENCE ADVICE Problem Solution FCC Statement 15.19: • Check AC/DC Connection. This device complies with part 15 of the FCC Rules. Transmitter will not • Confirm power outlet is working properly. Operation is subject to the following two conditions: turn on • Charge Battery Pack (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. • Check AC/DC Connection. Receiver will not turn • Confirm power outlet is working properly. on 15.21: Changes or modifications not expressly approved by the party responsible for Battery does not • AC/DC adaptor has not been connected. compliance could void the user’s authority to operate the equipment. recharge • Check battery pack connection to receiver. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set - Connection is lost • Confirm receiver and transmitter are ON. forth for an uncontrolled environment .For baby unit it should • Confirm AC/DC adaptor is connected properly. be installed and operated with minimum distance 20cm between the • Place transmitter and receiver near each other, radiator& your body. • turn off both units and turn the back on to This transmitter must not be co-located or operating in conjunction • resume link with any other antenna or transmitter. IC STATEMENT: - Operation of this device is subject to the following two conditions: 1. this device may not cause interference, and 2. this device must accept any interference, including interference that may cause undesired operation of the device. 10 11

WARRANTY NOTES Mobi Technologies, Inc. warrants this product to be free from defects in material and workmanship for a period of ninety (90) days from the date of purchase. Should this product prove to be defective at any time during the warranty period, Mobi Technologies, Inc. will, at its option, either replace or repair it without charge. After the warranty period, a service charge will be applied for replacement of parts or labor for repair. To obtain warranty service, please return the product to Mobi along with a dated sales re- ceipt from the place of purchase. Purchaser is responsible for shipping the product to Mobi Technologies, Inc. at the address indicated below and for all associated freight and insurance costs. This warranty does not cover damage caused by accident, misuse, abuse, improper maintenance, unauthorized modification, or connection to an improper power supply. A charge will be made for repair of such damage. This warranty excludes all incidental or consequential damages and any liability other than what is stated above. © 2011 Mobi Technologies, Inc. All Rights Reserved. Mobi Technologies, Inc. 5913 Blackwelder St Culver City CA 90232 Toll Free Number (877) 662-4462 www.getmobi.com Please register your product at: www.getmobi.com/registerproduct.php 12 13

Mobi Technologies, Inc. 5913 Blackwelder St Culver City CA 90232 Toll Free Number (877) 662-4462 www.getmobi.com Mobi and Pure Sounds are registered trademarks of Mobi Technologies, Inc. © 2012 Mobi Technologies, Inc. All Rights Reserved


Document Created: 2012-01-12 15:53:07
Document Modified: 2012-01-12 15:53:07
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC