I16D00012-BLE

FCC ID: XWI-CS399

Test Report

Download: PDF
FCCID_2983048

Full TEST REPORT No. I16D00012-BLE For Client : Medical Alarm Concepts Production : 3G mobile personal emergency response device Model Name : CS399-PD FCC ID: XWI-CS399 Hardware Version: V2.0 Software Version: CS399_YD_72KK_V01 Issued date: 2016-04-25 Note: The test results in this test report relate only to the devices specified in this report. This report shall not be reproduced except in full without the written approval of ECIT Shanghai. Test Laboratory: ECIT Shanghai, East China Institute of Telecommunications Add: 7-8F, G Area, No.668, Beijing East Road, Huangpu District, Shanghai, P. R. China Tel: (+86)-021-63843300, E-Mail: welcome@ecit.org.cn

RF Test Report Report No.: I16D00012-BLE Revision Version Report Number Revision Date Memo I16D00012-BLE 00 2016-04-25 Initial creation of test report East China Institute of Telecommunications Page Number : 2 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE CONTENTS 1. TEST LABORATORY ............................................................................................... 5 1.1. TESTING LOCATION ............................................................................................... 5 1.2. TESTING ENVIRONMENT....................................................................................... 5 1.3. PROJECT DATA ...................................................................................................... 5 1.4. SIGNATURE ............................................................................................................. 5 2. CLIENT INFORMATION ........................................................................................... 6 2.1. APPLICANT INFORMATION ................................................................................... 6 2.2. MANUFACTURER INFORMATION ......................................................................... 6 3. EQUIPMENT UNDER TEST (EUT) AND ANCILLARY EQUIPMENT (AE) ............ 7 3.1. ABOUT EUT ............................................................................................................. 7 3.2. INTERNAL IDENTIFICATION OF EUT USED DURING THE TEST ...................... 7 3.3. INTERNAL IDENTIFICATION OF AE USED DURING THE TEST ......................... 7 4. REFERENCE DOCUMENTS ................................................................................... 8 4.1. REFERENCE DOCUMENTS FOR TESTING .......................................................... 8 5. SUMMARY OF TEST RESULTS.............................................................................. 9 5.1. NOTES .................................................................................................................... 10 5.2. STATEMENTS ........................................................................................................ 10 6. TEST RESULT ........................................................................................................ 11 6.1. PEAK OUTPUT POWER-CONDUCTED ............................................................... 11 6.2. PEAK POWER SPECTRAL DENSITY .................................................................. 13 6.3. 6DB BANDWIDTH.................................................................................................. 15 6.4. FREQUENCY BAND EDGES-CONDUCTED ........................................................ 17 6.5. CONDUCTED EMISSION ...................................................................................... 19 6.6. RADIATED EMISSION ........................................................................................... 22 7. TEST EQUIPMENTS AND ANCILLARIES USED FOR TESTS ........................... 32 East China Institute of Telecommunications Page Number : 3 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 8. TEST ENVIRONMENT ........................................................................................... 33 ANNEX A. DEVIATIONS FROM PRESCRIBED TEST METHODS ............................. 34 East China Institute of Telecommunications Page Number : 4 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

€ EcIT RF Test Report Report No.: 116D00012—BLE 1. Test Laboratory 1.1. Testing Location Company Name: ECIT Shanghai, East China Institute of Telecommunications Address: 7—8F, G Area, No. 668, Beijing East Road, Huangpu District, Shanghai, P. R. China Postal Code: 200001 Telephone: (+86)—021—63843300 Fax: (+86)—021—63843301 1.2. Testing Environment Normal Temperature: 15—35°C Extreme Temperature: —10/+55°C Relative Humidity: 20—75% 1.3. Project data Project Leader: Yu Anlu Testing Start Date: 2016—01—22 Testing End Date: 2016—04—25 1.4. Signature v4 + 9P Wang Daming sdd Liu Jianquan (Prepared this test report) (Reviewed this test report) P .mC Zheng Zhongbin Director of the laboratory {Approved this test report) East China Institute of Telecommunications Page Number : 5 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 2. Client Information 2.1. Applicant Information Company Name: Medical Alarm Concepts Address: 200 West Church Rd., Suite B, King of Prussia, PA, USA Telephone: 1-215-850-4600 Postcode: 19406 2.2. Manufacturer Information Company Name: Xi’an iHelp Wearable Electronic Co.Ltd Address: Innovative Business Building No. 2,#69 Jinye Road,Xi'an,China Telephone: 029-88311435-8003 Postcode: 710077 East China Institute of Telecommunications Page Number : 6 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

C@ EcIT RF Test Report Report No.: 116D00012—BLE 3. Equipment Under Test (EUT) and Ancillary Equipment (AE) 3.1. About EUT EUT Description 3G mobile personal emergency response device Model name CS399—PD UMTS Frequency Band WCDMA Band 850/1700/1900/900/2100 GSM Frequency Band na BLE Frequency 2402MHz—2480Mhz BLE Channel Channel0—Channel39 BLE Modulation GFSK Extreme Temperature —10/4+55°C Nominal Voltage 3.BV Extreme High Voltage 4.2V Extreme Low Voltage 3AV Note: Photographs of EUT are shown in ANNEX A of this test report. 3.2. Internal Identification of EUT used during the test EUT ID* SN or IMEI HW Version SW Version Date of receipt NO2 N/A V2.0 CS399_YD_72KK_ 2016—01—21 VO1 *EUT ID: is used to identify the test sample in the lab internally. 3.3. Internal Identification of AE used during the test AE ID* Description SN AE1 RF cable AE2 *AE ID: is used to identify the test sample in the lab internally. East China Institute of Telecommunications Page Number : 7 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 4. Reference Documents 4.1. Reference Documents for testing The following documents listed in this section are referred for testing. Reference Title Version FCC CFR 47, Part 15,Subpart C: 15.205 Restricted bands of operation; 15.209 Radiated emission limits, general FCC Part15 requirements; 2014 15.247 Operation within the bands 902-928MHz, 2400-2483.5MHz, and 5725-5850MHz. American National Standard of Procedures for ANSI C63.10 Compliance Testing of Unlicensed Wireless 2013 Devices East China Institute of Telecommunications Page Number : 8 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 5. Summary of Test Results A brief summary of the tests carried out is shown as following. Sub-clause of Sub-claus Measurement Items Verdict Part15C e of IC Maximum Peak Output Power 15.247(b) / P Peak Power Spectral Density 15.247(e) / P 6dB Occupied Bandwidth 15.247(a) / P Band Edges Compliance 15.247(d) / P Transmitter Spurious 15.247 / P Emission-Conducted Transmitter Spurious 15.247 / P Emission-Radiated AC Powerline Conducted 15.107,15.207 / NA Emission Please refer to part 5 for detail. The measurements are according to ANSI C63.10. Terms used in Verdict column P Pass, the EUT complies with the essential requirements in the standard. NP Not Perform, the test was not performed by ECIT. NA Not Applicable, the test was not applicable. Fail, the EUT does not comply with the essential requirements in the F standard. Test Conditions Tnom Normal Temperature Tmin Low Temperature Tmax High Temperature Vnom Normal Voltage Vmin Low Voltage Vmax High Voltage Hnom Norm Humidity Anom Norm Air Pressure East China Institute of Telecommunications Page Number : 9 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

€ EcIT RF Test Report Report No.: 116D00012—BLE For this report, all the test case listed above are tested under Normal Temperature and Normal Voltage, and also under norm humidity, the specific conditions as following: Temperature Tnom 22°C Voltage Vnom 3.8V Humidity Hnom 32% Air Pressure Anom 1010hPa Note: a. All the test data for each data were verified, but only the worst case was reported. b.The GFSK, t/4 DQPSK and 8DPSK were set in DH1 for GFSK, 2—DH1 for t1/4 DQPSK, 3—DH1 for 8DPSK. c.The DC and low frequency voltages‘ measurement uncertainty is +2%. 5.1. Notes All reported tests were carried out on a sample equipment to demonstrate limited compliance with section 3. The test results of this test report relate exclusively to the item(s) tested as specified in section 5. The following deviation from, additions to, or exclusions from the test specifications have been made. See section 3. 5.2. Statements The product name CS399—PD, supporting WCDMA/HSDPA/HSUPA/BT/BLE manufactured by Xi‘an iHelp Wearable Electronic Co.Ltd, is a new product for testing. ECIT has verified that the compliance of the tested device specified in section 5 of this test report is successfully evaluated according to the procedure and test methods as defined in type certification requirement listed in section 5 of this test report. East China Institute of Telecommunications Page Number : 10 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 6. Test result 6.1. Peak Output Power-Conducted 6.1.1 Measurement Limit Standard Limit (dBm) FCC Part 15.247(b)(1) < 30 6.1.2 Test Condition: Hopping Mode RBW VBW Span Sweeptime Hopping OFF 3MHz 10MHz 9MHz Auto 6.1.3 Test procedure The measurement is according to ANSI C63.10 clause 7.8.5. 1. The output power of EUT was connected to the spectrum analyzer by cable. The path loss was compensated to the results for each measurement. 2. Enable EUT transmitter maximum power continuously. 3. Measure the conducted output power and record the results it. 6.1.4 Measurement Results: For GFSK Ch0 2402 Ch19 2440 CH39 2480 Channel Conclusion MHz MHz MHz Peak -1.50 -1.34 -1.78 Conducted P Output Power Fig.1 Fig.2 Fig.3 (dBm) Conclusion: PASS Test graphs an below East China Institute of Telecommunications Page Number : 11 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Fig.1 Peak Conducted Output Power CH0, DH1 Fig.2 Peak Conducted Output Power CH19, DH1 East China Institute of Telecommunications Page Number : 12 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

@ED EcCIT RF Test Report Report No.: 116D00012—BLE & Ret is asn Fig.3 Peak Conducted Output Power CH39, DH1 6.2. Peak Power Spectral Density 6.2.1 Measurement Limit: Standard Limit FCC CFR Part 15.247(e) < 8dBm/3 KHz 6.2.2 Test procedures The measurement is according to ANSI C63.10 clause 11.10. 1. The output power of EUT was connected to the spectrum analyzer. The path loss was compensated to the results for each measurement. Enable EUT transmitter maximum power continuously. ND Set analyzer center frequency to DTS channel center frequency. @ Set the span to 1.5 times the DTS bandwidth. B Set the RBW to 3 kHz = RBW = 100 kHz. Setthe VBW > [3 X RBW]. NO Detector = peak. Sweep time = auto couple. O Trace mode = max hold. (© Allow trace to fully stabilize. —o— Use the peak marker function to determine the maximum amplitude level within the RBW. . If measured value exceeds requirement, then reduce RBW (but no less than 3 kHz) _i No and repeat. East China Institute of Telecommunications Page Number : 13 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date _: Apr,25, 2016

«EE/ EcCIT RF Test Report Report No.: 116D00012—BLE 6.2.3 Measurement Uncertainty: Measurement Uncertainty +0.750B 6.2.4 Measurement Results: 802.11b/g mode Power Spectral Mode Channel Conclusi Density(dBm/3kHz) oncluston 00 Fig.4 —17.46 P BT4.0 19 Fig.5 —17.35 P 39 Fig.6 —17.68 P Test figure as below: ® — : Fig.4 Power spectral density: CHO East China Institute of Telecommunications Page Number : 14 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date _: Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Fig.5 Power spectral density: CH19 Fig.6 Power spectral density: CH39 6.3. 6dB Bandwidth 6.3.1 Measurement Limit: Standard Limit FCC 47 CFR Part 15.247 (a) (1) N/A East China Institute of Telecommunications Page Number : 15 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

@EE/ eEcCItT RF Test Report Report No.: 116D00012—BLE 6.3.2 Test procedures The measurement is according to ANSI C63.10 clause 7.8.7 1. Connect the EUT through cable and divide with CBT32 and spectrum analyzer. Enable the EUT transmit maximum power. ~N o o s o N Set the spectrum analyzer as Span: two or five times of OBW RBW= 1% to 5% of the OBW ; VBW >3RBW; Max Hold. Select the max peak, and N DB DOWN=200B. Record the results. Measurement Result: For GFSK Channel 20dB Bandwidth (KHz) Conclusion 0 Fig.7 705.128 P 39 Fig.8 698.718 P 78 Fig.9 692.306 P Conclusion: PASS Test graphs as below: & Fig.7 6dB Bandwidth: ChO East China Institute of Telecommunications Page Number : 16 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date _: Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Fig.8 6dB Bandwidth: Ch19 Fig.9 6dB Bandwidth: Ch39 6.4. Frequency Band Edges-Conducted 6.4.1 Measurement Limit: Standard Limited(dBc) FCC 47 CFR Part 15.247(d) >20 6.4.2 Test procedure East China Institute of Telecommunications Page Number : 17 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE The measurement is according to ANSI C63.10 clause 7.8.6. 1. Connect the EUT to spectrum analyzer. 2. Set RBW=100KHz, VBW=300KHz, span more than 1.5 times channel bandwidth (2MHz). 3. Detector =peak, sweep time=auto couple, trace mode=max hold. 4. Allow sweep to continue until the trace stabilizes. 6.4.3 Measurement results For GFSK Channel Band Edge Power (dBc) Conclusion 00 Fig.10 P 39 Fig.11 P Conclusion: PASS Test graphs an below Fig.10 Frequency Band Edge: GFSK, Ch0, Hopping OFF East China Institute of Telecommunications Page Number : 18 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Fig.11 Frequency Band Edge: GFSK, Ch0, Hopping ON 6.5. Conducted Emission 6.5.1 Measurement Limit: Standard Limit 20dB below peak output power in 100KHz FCC 47 CFR Part15.247 (d) bandwidth 6.5.2 Test procedures The measurement is according to ANSI C63.10 clause 7.8.8. 1. Connect the EUT to spectrum analyzer. 2. Set RBW=100KHz, VBW=300KHz. 3. Detector =peak, sweep time=auto couple, trace mode=max hold. 6.5.3 Measurement Results: Channel Frequency Range Test Results Conclusion Center Freq. Fig.12 P Ch0 2402MHz 30MHz~26GHz Fig.13 P Center Freq. Fig.14 P Ch19 2440MHz 30MHz~26GHz Fig.15 P Ch39 2480MHz Center Freq. Fig.16 P East China Institute of Telecommunications Page Number : 19 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 30MHz~26GHz Fig.17 P Conclusion: PASS Test graphs as below Fig.12 Conducted spurious emission: Ch0, 2402MHz Fig.13 Conducted spurious emission: Ch0, 30MHz~26GHz East China Institute of Telecommunications Page Number : 20 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Fig.14 Conducted spurious emission: Ch19, 2441MHz Fig.15 Conducted spurious emission: Ch19, 30MHz~26GHz East China Institute of Telecommunications Page Number : 21 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Fig.16 Conducted spurious emission: Ch39, 2480MHz Fig.17 Conducted spurious emission: Ch39, 30MHz~26GHz 6.6. Radiated Emission 6.6.1 Measurement Limit: Standard Limit FCC 47 CFR Part 15.247, 15.205, 15.209 20dB below peak output power In addition, radiated emissions which fall in the restricted bands, as defined in 15.205(a), East China Institute of Telecommunications Page Number : 22 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE must also comply with the radiated emission limits specified in 15.209(a) (see 15.205(c)). Limit in restricted band: Frequency of emission Field strength (uV/m) Field strength (dBuV/m) (MHz) 30~88 100 40 88~216 150 43.5 216~960 200 46 Above 960 500 54 6.6.2 Test Method Portable, small, lightweight, or modular devices that may be handheld, worn on the body, or placed on a table during operation shall be positioned on a non-conducting platform, the top of which is 80 cm above the reference ground plane. The preferred area occupied by the EUT arrangement is 1 m by 1.5 m, but it may be larger or smaller to accommodate various sized EUTs. For testing purposes, ceiling- and wall-mounted devices also shall be positioned on a tabletop (see also ANSI C63.10-2009 section 6.3.4 and 6.3.5). In making any tests involving handheld, body-worn, or ceiling-mounted equipment, it is essential to recognize that the measured levels may be dependent on the orientation (attitude) of the three orthogonal axes of the EUT. Thus, exploratory tests as specified in 8.3.1 shall be carried out for various axes orientations to determine the attitude having maximum or near-maximum emission level. The EUT was placed on a non-conductive table. The measurement antenna was placed at a distance of 3 meters from the EUT. During the tests, the antenna height and the EUT azimuth were varied in order to identify the maximum level of emissions from the EUT. This maximization process was repeated with the EUT positioned in each of its three orthogonal orientations. Frequency of emission RBW/VBW Sweep Time (s) (MHz) 30~1000 100KHz/300KHz 5 1000~4000 1MHz/1MHz 15 4000~18000 1MHz/1MHz 40 18000~26500 1MHz/1MHz 20 6.6.3 Measurement Results: A “reference path loss” is established and ARpi is the attenuation of “reference path loss”, and including the gain of receive antenna , the gain of the preamplifier, the cable loss. The measurement results are obtained as described below: ARpi = Cable loss + Antenna Gain-Preamplifier gain East China Institute of Telecommunications Page Number : 23 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Result=PMea + ARpi Channel Frequency Range Test Results Conclusion 30MH~1GHz Fig.18 P Ch0 2402MHz 1GHz~3GHz Fig.19 P 3GHz~18GHz Fig.20 P Power 2.38GHz~2.4GHz Fig.21 P Power 2.45GHz~2.5GHz Fig.22 P Channel Frequency Range Test Results Conclusion 30MH~1GHz Fig.23 P Ch0 2480MHz 1GHz~3GHz Fig.24 P 3GHz~18GHz Fig.25 P All channels 18GHz~26GHz Fig.26 P Ch0 30MHz-1GHz Frequency(MHz) Result(dBuV/m) ARpl (dB) PMea(dBuV/m) Polarity 51.608772 29.95 -25 54.95 V 66.590096 31.22 -27.2 58.42 V 73.91922 36.19 -28.2 64.39 V 75.302364 36.22 -28.2 64.42 V 279.877576 34.65 -21.1 55.75 H 557.578848 38.2 -13.2 51.4 H Ch0 1GHz-3GHz Frequency(MHz) Result(dBuV/m) ARpl (dB) PMea(dBuV/m) Polarity 1996.0612 53.42 2.5 50.92 H 2662.920576 55.53 10 45.53 H 2788.448077 52.94 10.3 42.64 H East China Institute of Telecommunications Page Number : 24 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 2821.346154 53.25 10.6 42.65 H 2904.577692 53.96 11.3 42.66 H 2967.925192 53.61 11.4 42.21 V Ch0 3GHz-18GHz Frequency(MHz) Result(dBuV/m) ARpl (dB) PMea(dBuV/m) Polarity 15368.79 56.31 22.8 33.51 H 15820.652 57.88 24.7 33.18 H 16494.08253 58.64 26.9 31.74 V 16891.85733 60.03 27.1 32.93 H 17518.7006 61.82 29.2 32.62 V 17980.87733 62.33 30.1 32.23 H Ch39 30MHz-1GHz Frequency(MHz) Result(dBuV/m) ARpl (dB) PMea(dBuV/m) Polarity 34.452684 20.59 -25.9 46.49 V 51.590684 29.95 -25 54.95 V 65.488968 31.76 -26.9 58.66 V 75.157408 34.79 -28.2 62.99 V 479.3724 25.9 -15.3 41.2 H 559.860908 37.78 -13.1 50.88 H Ch39 1GHz-3GHz Frequency(MHz) Result(dBuV/m) ARpl (dB) PMea(dBuV/m) Polarity 2193.0412 49.34 5 44.34 H 2662.080384 56.45 10 46.45 H 2740.048654 53.03 10.1 42.93 V 2802.678269 53.21 10.4 42.81 H 2901.711346 54.31 11.3 43.01 H East China Institute of Telecommunications Page Number : 25 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 2998.158654 54.12 11.8 42.32 H Ch39 3GHz-18GHz Frequency(MHz) Result(dBuV/m) ARpl (dB) PMea(dBuV/m) Polarity 15831.54567 57.85 24.7 33.15 H 16213.46507 59.03 25.6 33.43 V 16794.5614 59.83 27.3 32.53 H 17329.54413 61.43 28.4 33.03 V 17660.29567 62.02 28.9 33.12 H 17972.67233 63.04 30 33.04 H All Ch 18GHz~26.5GHz Frequency(MHz) Result(dBuV/m) ARpl (dB) PMea(dBuV/m) Polarity 19525.786000 49.0 6.97 42.03 V 20684.980000 47.7 6.97 40.73 H 22119.789000 45.3 3.05 42.05 V 23627.899000 43.8 3.05 40.75 H 24606.319000 43.4 3.05 40.35 V 25244.558000 43.6 3.05 40.55 H Note: all the test data shown was peak detected. Conclusion: PASS Test graphs as below: East China Institute of Telecommunications Page Number : 26 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

C@ EcIT RF Test Report Report No.: 116D00012—BLE 100 30 80 70 & m i Fooipans 2 E 50 E 404 . + + 10 z # 20 10 0 30M 50 & 80— 1000 200 300 410 500 an 16 Frequency in Hz Fig.18 Radiated emission: Ch0, 3OMHz~1GHz 100 s so soobepue 9x m & m &2 it 9 + e CS © $ a 4 |4 #0 * 3 2 10 o 1000 150 am zo su0 Freqsency in MHz Fig.19 Radiated emission: ChQ, 1GHz~3GHz East China Institute of Telecommunications Page Number : 27 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

@EE/ ecIr RF Test Report Report No.: 116D00012—BLE 100 so s FooRE DLE B 70 “#" 80 229 Level in dBZk/m FGenl »**" 50 407 30 20 55 6 7 8 9 116 ito Frequency in Hz Fig.20 Radiated emission: ChO, 3GHz~18GHz 100 30 2401870571 GHe &0 81.0208i6/m EoGRe DLE BK m v & m if EOGBE DLEAV, a 2 m Y 1 q 3 a 30 2M0007IGGH 2 31 008)n 10 0 210 250 2M 250 Freqsency in MHz Fig.21 Radiated emission (Power): low channel East China Institute of Telecommunications Page Number : 28 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

C@ EcIT RF Test Report Report No.: 116D00012—BLE 100 30 24799 236 CHz 80 66063dBii/m Eo4BE DLE BX 70 y & m i EoLE DLE AL E 5o Y E «0 ® 2494057 CHz ©337086/m 20 10 0 210 250 200 2450 250 Freqsency in MHz (peak) Fig.22 Radiated emission (Power): high channel 100 30 80 70 & m i# Foopard a E 404 % 4 % N4 w ‘ ‘ ® 24@ 10 0 30M 50 & 80— T00v 200 300 @0 500 ao 16 Freavency in Hz Fig.23 Radiated emission: Ch39, 3OMHz~1GHz East China Institute of Telecommunications Page Number : 29 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

C@ EcIT RF Test Report Report No.: 116D00012—BLE 100 30 ao ECoRe DL BX 70 & m + 3 #i. + Cr5#s 083 %” a 444.4.4 4 30 20 10 o 1000 150 zm o s1 Freqsency in MHz Fig.24 Radiated emission: Ch39, 1GHz~3GHz 100 ao s roope piEpk m h & 5 fm’ i sodbeeth ns E 5o ’, %” « 3 2 10 0 1 Eo $00r0 8 0s me 10 Freaueny in Hz Fig.25 Radiated emission: Ch39, 3GHz~18GHz East China Institute of Telecommunications Page Number : 30 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

EcIT RF Test Report Report No.: 116D00012—BLE 100 30 80 70 80 Level in dBZk/m 50 «0 20.96@0000GH 3145 0Bi6/m 18 19 2 21 2 3 24 & 2 Frequency in GHz Fig.26 Radiated emission: 18 GHz — 26 GHz East China Institute of Telecommunications Page Number : 31 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE 7. Test Equipments and Ancillaries Used For Tests The test equipments and ancillaries used are as follows. Conducted test system Calibration Serial Cal.interva No. Equipment Model Manufacturer Date Number l Vector Signal Rohde&Schw 1 FSQ26 101096 2015-05-13 1 Analyser arz Bluetooth Rohde&Schw 2 CBT32 100785 2015-05-13 1 Tester arz DC Power LOC-220Z006 3 ZUP60-14 TDL-Lambda 2015-05-13 1 Supply -0007 Radiated emission test system Calibratio Serial n Date Cal.interv No. Equipment Model Manufacturer Number al Universal 2015-05-1 1 CMU200 123126 R&S 1 Radio 3 Communicati 2015-05-1 2 ESU40 100307 R&S 1 Test Receiver 3 Trilog VULB916 VULB9163-51 2014-11-0 3 Schwarzbeck 3 Antenna 3 5 5 Double ETS-311 2014-05-0 4 Ridged Guide 00135885 ETS 3 7 6 Antenna 2-Line 2015-05-1 5 ENV216 101380 R&S 1 V-Network 3 Anechoic chamber Fully anechoic chamber by Frankonia German. East China Institute of Telecommunications Page Number : 32 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

@ED EcIT RF Test Report Report No.: 116D00012—BLE 8. Test Environment Shielding Room1 (6.0 metersx3.0 metersx2.7 meters) did not exceed following limits along the conducted RF performance testing: Temperature Min. = 15 °C, Max. = 30 °C Relative humidity Min. = 30 %, Max. = 60 % Shielding effectiveness > 110 dB Ground system resistance <0.5 Q Uniformity of field strength Between 0 and 6 dB, from 80MHz to 3000 MHz Control room did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max. = 35 °C Relative humidity Min. =30 %, Max. = 60 % Shielding effectiveness > 110 dB Electrical insulation > 10 kQ Ground system resistance <0.5 Q Fully—anechoic chamber1 (6.8 meters»3.08 meters«3.53 meters) did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max. = 30 °C Relative humidity Min. = 30 %, Max. = 60 % Shielding effectiveness > 110 dB Electrical insulation > 10 kQ Ground system resistance <0.5 Q Uniformity of field strength Between 0 and 6 dB, from 80MHz to 3000 MHz Fully—anechoic chamber2 (Tapered Section: 8.75 metersx3.66 metersx3.66 meters, Rectangular Section: 7.32 meters3.97 metersx3.66 meters) did not exceed following limits along the EMC testing: Temperature Min. = 15 °C, Max. = 30 °C East China Institute of Telecommunications Page Number : 83 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016

RF Test Report Report No.: I16D00012-BLE Relative humidity Min. = 35 %, Max. = 60 % Shielding effectiveness > 110 dB Electrical insulation > 10 k Ground system resistance < 0.5  Uniformity of field strength Between 0 and 6 dB, from 30MHz to 40000MHz ANNEX A. Deviations from Prescribed Test Methods No deviation from Prescribed Test Methods. **********End The Report********** East China Institute of Telecommunications Page Number : 34 of 34 TEL: +86 21 63843300 FAX: +86 21 63843301 Report Issued Date : Apr,25, 2016


Document Created: 2017-12-04 15:24:40
Document Modified: 2017-12-04 15:24:40
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC