SAR test report2

FCC ID: XUJPADIII

RF Exposure Info

Download: PDF
FCCID_4298927

FCC SAR Test Report Access to the World 7. Information on the Testing Laboratories We, EMTEK (SHENZHEN) CO., LTD., were founded in 2000 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. Site Description EMC Lab. : Accredited by CNAS,2016.10.24 The certificate is valid until 2022.10.28 The Laboratory has been assessed and proved to be in compliance with CNAS-CL01:2006 (identical to ISO/IEC 17025:2005) The Certificate Registration Number is L2291. Accredited by TUV Rheinland Shenzhen 2016.5.19 The Laboratory has been assessed according to the requirements ISO/IEC 17025. Accredited by FCC, August 06, 2018 Designation Number: CN1204 Test Firm Registration Number: 882943 Accredited by A2LA, August 31, 2020 The Certificate Registration Number is 4321.01. Accredited by Industry Canada, November 09, 2018 The Conformity Assessment Body Identifier is CN0008. Name of Firm : EMTEK(SHENZHEN) CO., LTD. Site Location : Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China If you have any comments, please feel free to contact us at the following: Add: Bldg 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China TEL: 86-755-26954280 FAX: 86-755-26954282 Email: csg@emtek.com.cn Web Site: www.emtek.com.cn The road map of all our labs can be found in our web site also. ---END--- Report Format Version 1.0.0 Page No. : 33of33 Report No. : ES190402976W03 Issued Date : May 23, 2019

FCC SAR Test Report Access to the World Appendix A. SAR Plots of System Verification The plots for system verificationwith largest deviation for each SAR system combination are shown as follows. Report Format Version 1.0.0 Issued Date : May 23, 2019 Report No. : ES190402976W03

Test Laboratory: Shenzhen EMTEK Co.,Ltd. Date: 2019/4/17 System Check_B2450 DUT: Dipole 2450 MHz; Type:D2450V2; SN:835 Communication System: CW; Frequency: 2450 MHz;Duty Cycle: 1:1 Medium: B2450 Medium parameters used: f = 2450 MHz; σ = 2.028 S/m; εr = 52.823; ρ = 1000 kg/m3 Ambient Temperature：22.5 ℃; Liquid Temperature：21.6 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(7.89, 7.89, 7.89); Calibrated: 2018/11/12; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2018/10/29 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Pin=250mW/Area Scan (61x81x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 27.2 W/kg Pin=250mW/Zoom Scan (7x7x7) /Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 106.8 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 32.3 W/kg SAR(1 g) = 12.95 W/kg; SAR(10 g) = 6.11 W/kg Maximum value of SAR (measured) = 26.3 W/kg

FCC SAR Test Report Access to the World Appendix B. SAR Plots of SAR Measurement The SAR plots for highest measured SAR in each exposure configuration, wireless mode and frequency band combination, and measured SAR > 1.5 W/kg are shown as follows. Report Format Version 1.0.0 Issued Date : May 23, 2019 Report No. : ES190402976W03

Test Laboratory: Shenzhen EMTEK Co.,Ltd. Date: 2019/4/17 802.11b-ch6-level47-top DUT: X-431 Communication System: 802.11b; Frequency: 2437 MHz;Duty Cycle: 1:1 Medium: B2450 Medium parameters used: f = 2437 MHz; σ = 1.99 S/m; εr = 53.024; ρ = 1000 kg/m3 Ambient Temperature：22.5 ℃; Liquid Temperature：21.6 ℃ DASY5 Configuration: - Probe: EX3DV4 - SN3970; ConvF(7.89, 7.89, 7.89); Calibrated: 2018/11/12; - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1418; Calibrated: 2018/10/29 - Phantom: ELI v5.0; Type: QDOVA002AA; Serial: TP:1231 - Measurement SW: DASY52, Version 52.8 (7); SEMCAD X Version 14.6.10 (7164) Body Top/Area Scan (101x171x1): Interpolated grid: dx=1.200 mm, dy=1.200 mm Maximum value of SAR (interpolated) = 0.126 W/kg Body Top/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 5.215 V/m; Power Drift = -0.08 dB Peak SAR (extrapolated) = 0.151 W/kg SAR(1 g) = 0.081 W/kg; SAR(10 g) = 0.045 W/kg Maximum value of SAR (measured) = 0.123 W/kg

FCC SAR Test Report Access to the World Appendix C. Calibration Certificate for Probe and Dipole The calibration certificates are shown as follows. Report Format Version 1.0.0 Issued Date : May 23, 2019 Report No. : ES190402976W03











Document Created: 2019-05-24 16:32:45
Document Modified: 2019-05-24 16:32:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC